HT4009 I am unable to purchace an in app purchace for foreflight pro 1 yr subscription

unable to purchace in app purchace

If you would like help from these user-to-user forums then you will need to provide more information than 'unable to purchase' - what happens when you try to buy it, does the 'buy' button not work, if you are getting an error message then what does it say ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Similar Messages

Unable to find skype in app store for Mac Pro

unable to find skype on Mac pro App store.

For App Store queries post here:
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

Unable to download windows 7 support software for macbook pro

I was able to install Windows 7 Home Premium and also partitioned the HD. After that I have been trying to download Windows support software through Bootcamp into a properly formatted pen drive. The download progresses to about 20% of the bar showing progress and then just freezes. I checked the internet connection but it is working fine. Not sure if the file sizes are huge(the progress bar doesn't show any details about how big the file sizes are). Left the mac book running for more than 3 hours but no progress. Any suggestions? Am I doing something wrong?
The Windows 7 installation doesn't have any drivers so i am unable to even connect to the internet through an ethernet connection.

The Boot Camp assistant created an extra partition, then just stopped. It didn't move forward with installing Windows. Now I have a BOOTCAMP partition and a few options for installing Windows. I have a DVD I burned, and an ISO out on a USB HD formatted for FAT. But I'm not sure how to go about installing Windows now. I did this once before a few years ago but don't remember the steps. I want to install Windows onto the boot camp partition. Would you happen to know how I can proceed?
I tried holding down the Option key upon boot and selecting the Windows DVD but it just hung there on the Apple logo. Only way to boot was to hold Option and select my main HD.

Why am I getting unable to purchase message from App Store with free apps

Why am I getting unable to purchase message from App Store for free apps on my I pad?

Sign out of your Apple ID, reboot yor iPad and sign in again.
Settings>iTunes and App Store. Tap your ID and sign out.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Go go back to Settings>iTunes & App Store. Sign in. Try to download the free apps again.

VLD-1119: Unable to generate Multi-table Insert statement for some or all t

Hi All -
I have a map in OWB 10.2.0.4 which is ending with following error: -
VLD-1119: Unable to generate Multi-table Insert statement for some or all targets.*
Multi-table insert statement cannot be generated for some or all of the targets due to upstream graphs of those targets are not identical on "active operators" such as "join".*
The map is created with following logic in mind. Let me know if you need more info. Any directions are highly appreciated and many thanks for your inputs in advance: -
I have two source tables say T1 and T2. There are full outer joined in a joiner and output of this joined is passed to an expression to evaluate values of columns based on
business logic i.e. If T1 is available than take T1.C1 else take T2.C1 so on.
A flag is also evaluated in the expression because these intermediate results needs to be joined to third source table say T3 with different condition.
Based on value taken a flag is being set in the expression which is used in a splitter to get results in three intermediate tables based on flag value evaluated earlier.
These three intermediate tables are all truncate insert and these are unioned to fill a final target table.
Visually it is something like this: -
T1 -- T3 -- JOINER1
| -->Join1 (FULL OUTER) --> Expression -->SPLITTER -- JOINER2 UNION --> Target Table
| JOINER3
T2 --
Please suggest.

I verified that their is a limitation with the splitter operator which will not let you generate a multi split having more than 999 columns in all.
I had to use two separate splitters to achieve what I was trying to do.
So the situation is now: -
Siource -> Split -> Split 1 -> Insert into table -> Union1---------Final tableA
Siource -> Split -> Split 2 -> Insert into table -> Union1

Unable to load Flash 9 on my Intel MacBook Pro

Unable to load Flash 9 on my Intel MacBook Pro but can on my
Intel iMac. I spoke with a Tech from the Mac Store service area and
was told that there in a thread on this issue but I can't find it.
The basic issue is that I am able to load Adobe Flash Player
9 on my Intel iMac but not on my Intel MacBook Pro and I'm unable
to determain why. I tryed uninstalling and reinstalling three times
and found no difference.
If someone could help me I'd be thankful.
Dave

I bought the $29 version of Snow Leopard (not the kosher way of doing things, i know.
If you read the license agreement, there's actually no difference between what's allowed with the $29 copy and the $169 boxed set. The only difference is that the boxed set also includes iLife and iWork. There is also, despite what some will have you believe, nothing in the license agreement that requires Leopard to be pre-installed except in the case of the $10 disk purchased as part of the Up-to-Date program (for folks who bought a machine shortly before SL was released). So, you're not being bitten by some technical requirement for Leopard to be present.
I get a flashing folder with a question mark. My disk drive makes some crazy noises as well, and it seems to start running fast, then slowing down. I think it may have caused a minor scratch on the disk as well.
Sounds like it's possible the drive could be failing, though that's impossible to say for sure remotely. One man's crazy noises are another man's normal state of operations. Do other DVDs work in your drive?
I'll also need to do an "Archive & Install" since there are tons of important files on this machine.
*DO NOT* attempt to install a system update on this machine unless you have good backups! If something goes wrong, you're screwed if you didn't have a backup. Hopefully, you have not reached that point already... I'm unclear on whether your machine is no longer able to boot, or if it's only having trouble when you try to boot from the SL disk.
If your machine is still functional, your first priority before doing *+anything else+* should be to make at least two backups. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for assistance with this.
If your machine can't boot anymore, let us know and we'll offer some troubleshooting tips. And don't try to do anything else with it until you've consulted with some expert, whether here or at an Apple Store or somewhere else.

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

I am unable to update the software for my 4s. I am also unable to connect to the app store or itunes, it does not give an error message just says that i am unable to connect. Please help

I am unable to update my software in settings, just says an error occured. I am alsos unable to connect to the app and itunes store. (no error message occured) just says unable to connect. I am using cellular data and its turned on. Help me please

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to access Apps on HP Officejet Pro 8600 Plus

Hi guys,
I can print wirelessly and print remotely using the ePrint apps on my iphone and ipad. Until recently, I have been able to access the apps, but this has stopped. I now get the following error message:
"The printer was unable to connect to the server. Chieck your internet connection and try again."
The internet connection is stable and fine. Any ideas?
This question was solved.
View Solution.

Hello londonlaw,
Welcome to the HP Support Forums!
Sorry to hear about the recent issue when trying to access apps on your Officejet Pro 8600, I would like to offer a few suggestions that may help.
Check for updates on the printer, Getting the Latest Firmware and Product Updates.
Power off the printer and ensure the power cord is connected to a wall out let.
Next you want to power reset the router. If it has a power button press that, if not, remove the power cord. Wait 60 seconds and then allow it to power back up. Once router is fully on, power up the printer.
Try to access an app, if it works there is no need to continue. If it doesn't, try the next suggestion.
Refer to this Thread answered by a colleague of mine happytohelp01 : Efax 7510 still won't work after turning off/on ePrint several times. Follow the steps to setup a Manual I.P and DNS for the printer over the network. The steps will be the same, if not very similar for your printer as the one in the above post.
Try to an app once done, if still unable, continue below.
Go back to the above Thread, rather than using the DNS suggested try this set; Primary DNS Server : 209.244.0.3 & Secondary DNS Server : 209.244.0.4.
Try to access an app, if the feature is still not working you will need to call HP's Cloud Support team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the Technical Support number for your country/region.
I hope this has helped, if it has, please let me know what step helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Unable to set volume attribute "min-autosize" for volume

We have a TDP volume(destination), that is in snapmirrored state from 7Mode to cDOT.While trying to resize/increment the volume size by say 100g we get the following error. clusterName> volume size volumneName -vserver vserverName +100gWarning: Volume "vserver:volumeName" is a SnapMirror destination volume. The Filesystem Size for this volume is derived from its source and cannot be changed. The specified size will be used as the Volume Size.
Do you want to continue? {y|n}: y Error setting size of volume "vserver:volumeName". Unable to set volume attribute "min-autosize" for volume
"volumeName" on Vserver "vserverName". Reason: Volume 'volumenName' is a snapmirrored volume.
vol size: Flexible volume 'volumeName' size limit set to 8022664413184. Any idea ? Volumes autosize mode is false.

Hi I am not trying to change any setting. I am trying to increase the size of the volume. I understand in case of a Snapmirrored volume the fs_fixed options is ON.But one can always increase the actual volume size using vol size command. Even if I increase the size on ONTAP on the file system side it will show as the size same as source. I understand that. So my question is why is it prevenitng me from increasing the size. RegardsAdai

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

HT4009 I am unable to purchace an in app purchace for foreflight pro 1 yr subscription

Similar Messages

Maybe you are looking for