Unable to access Apps on HP Officejet Pro 8600 Plus

Hi guys,
I can print wirelessly and print remotely using the ePrint apps on my iphone and ipad. Until recently, I have been able to access the apps, but this has stopped. I now get the following error message:
"The printer was unable to connect to the server. Chieck your internet connection and try again."
The internet connection is stable and fine. Any ideas?
This question was solved.
View Solution.

Hello londonlaw,
Welcome to the HP Support Forums!
Sorry to hear about the recent issue when trying to access apps on your Officejet Pro 8600, I would like to offer a few suggestions that may help.
Check for updates on the printer, Getting the Latest Firmware and Product Updates.
Power off the printer and ensure the power cord is connected to a wall out let.
Next you want to power reset the router. If it has a power button press that, if not, remove the power cord. Wait 60 seconds and then allow it to power back up. Once router is fully on, power up the printer.
Try to access an app, if it works there is no need to continue. If it doesn't, try the next suggestion.
Refer to this Thread answered by a colleague of mine happytohelp01 : Efax 7510 still won't work after turning off/on ePrint several times. Follow the steps to setup a Manual I.P and DNS for the printer over the network. The steps will be the same, if not very similar for your printer as the one in the above post.
Try to an app once done, if still unable, continue below.
Go back to the above Thread, rather than using the DNS suggested try this set; Primary DNS Server : 209.244.0.3 & Secondary DNS Server : 209.244.0.4.
Try to access an app, if the feature is still not working you will need to call HP's Cloud Support team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the Technical Support number for your country/region.
I hope this has helped, if it has, please let me know what step helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Unable to scan from my HP OfficeJet Pro 8600 Plus to my Mac iOS 10.10

Just purchased a new Mac and running Yosemite. Tried adding my 8600 and it prints but will not scan. When attempting to scan to computer, a message "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." When I follow the link, it directs me to download the driver again.....and the cycle begins. I have tried completely uninstalling everything according to previous suggestions in the forum but nothing has helped.
I'm a new Mac user but just can't understand why this would work on my PC and not the new Mac.
This question was solved.
View Solution.

Hi castagmc,
Welcome to the HP Forums.
I see that you are having an issue when attempting to get the new Yosemite driver installed for the printer.
I do have some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please remove the usb cable from the printer and from the Mac and leave it disconnected until further notice.
I have a link that I am going to give you that gives detailed instruction for Uninstalling the Printer Software.
Once the uninstall is complete, please restart the Mac to have the changes take affect.
When the Mac is back up and running, disable any anti virus protection you may running. We do not want anything getting in the way when we reinstall.
The next step is to download and install the HP Officejet Pro 8600 series Full Feature Software and Drivers.
The installation will prompt you as to when to connect the usb cable so please do not connect it before hand.
Please feel free to write me back if you have any other questions.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

PDF from Google Apps gmail/gdrive by Cloudprinter failed on HP Officejet Pro 8600 Plus e-All-in-One

Dear forum contributors,
1. HP Officejet Pro 8600 Plus e-All-in-One
2. Linux OpenSuSE 12.2 64-bit
3. Failed , after the failed message is a very long URL to my gmail attachment.
4. This issue occured from the beginning, I have this printer only for one week.
When I print different kinds of PDF's from Google Apps (gmail and gdrive) by Google Cloudprinter I got a failed message at the HP eprinter Recent Print Jobs list.
Other prints from Google Cloudprinter, for example a webpage or a Google Docs document (not PDF) is working fine.
Also sending the same PDF's directly to my @hpeprinter.com e-mail address is working fine.
Is this a problem by Google Cloudprinter or HP e-print? How to solve the problem?
Thanks for helping,
Jurjen

After much research, I was unable to obtain a direct answer for two reasons: HP doesn't support Linux or Cloud Print beyond initial setup. I was not very satisfied with this answer as I knew you would not really be either so I found some links and this may be the last I can provide any assistance here due to the two reasons above. These links cover everything and should provide for you additional links to all of your questions I believe.
--Serving a Printer to Google Cloud Print from Linux--
--Google Cloud Print on Linux--
--Installing Google Cloud Print on a Linux Server--
Otherwise, if ePrint is not working within the apps using a Windows-based computer I am more than happy to assist you. You may continue to get support here from other community members regarding Linux but I may not be of much assistance. I can say the first place to check is www.eprintcenter.com and see what the error messages say there under the print history, cancel any pending print jobs and try again. Keep me posted on any additional information you may want to add regarding a Windows PC, otherwise I should direct you over to some great support provided by Google Cloud. Linux is suppose to work with these functions so I will leave you with this final excerpt from a Cloud Print Help site:
"Why is my document not printing?
1. Make sure your Google Cloud Print connector is running on a computer with Mac, Windows, or Linux.
2. If you're using Windows XP, make sure you also have the Windows XP Service Pack 3 (SP3) installed.
3. Confirm that the computer connected to your printer is powered on and that you are logged in."
This printer should support this feature so to make sure, you can log into www.eprintcenter.com and select ePrint Settings under the customized email address on this page and ensure you have Print Services ON. I wish I could be of more assistance however. I strongly recommend contacting the manufacturer of the apps you are having the problem with as these functions work when you use them like ePrint was intended (via email and mobile devices). Good Luck!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Unable to Communicate with Printer Error - Officejet Pro 8600

My printer was working fine last week... printing from my Mac desktop via wireless.
Now, when I try to print, the progress window is just hanging... trying to find the printer.
I deleted the printer in my settings and tried to reinstall. Now, I am getting an error message that says: Unable to Communicate with the Printer at this Time.
Help, please!
Comuputer: Mac OSX Version 10.9.3
Printer: Officejet Pro 8600 Plus... only about 3 months old!

Hello K_D123, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having wireless issues. I would like to try and help.
I would recommend powering off your computer and printer. Once they are both off, I would unplug the power from the back of your wireless router, wait 60 seconds and plug it back in. After the router has begun broadcasting, power on the printer and computer.
I would also recommend following the steps in this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing from Motorola Xoon tablet to Officejet Pro 8600 Plus via Android ePrint app

Hello!
My Officejet Pro 8600 Plus printer
- is connected to my Laptop (Win7 64bit) via USB cable
- is connected to my router via WLAN
- is configured to use ePrint with a registered mail address
My Motorola Xoom tablet3
- has Android Ice Cream Sandwich 4 installed as operating system
- has the HP ePrint Home&Biz app installed
ePrint
- ePrint app is configured
- the app identified/shows my printer as it should
- I successfully registered to ePrint on the HP website
- I am using a registered mail address for connection between app and ePrint online
As soon as I select a document on my tablet and try to print it,
- the app shows up a "rendering document" message for a short time
- a preview of the document should show up, but it doesn't!!
- I can see the selected document as "pending" print job
- no documents will be printed
- pending documents can't be deleted and remain in the tablet's display
So, I desparately need help! Why does my printer not receive or print the documents from the Xoom tablet?
Thanks a lot for your help!

I understand that It was not a problem with the connection. When dealing with wireless networks, it is always a good idea to set a static IP. It makes things more stable. The reason I told you to enter Google's DNS was not to connect you to Google. All a DNS does is create a pathway to the internet. Once any device finds the internet via the DNS it then goes where it is supposed to. It just uses the DNS as a referance for the internet. Web services should work fine with your router DNS, I have just had more success using Google's public DNS.
You never mentioned wether you did all the power cycling that I asked you too. I know it does not make sense, but power cycling everything on the network so it can all reconnect fresh, solves most issues like this one. However, if you have power cycled everything and you are still having issues, then try removing the Xoom and the printer from the network, and reconnecting them. Sometime, you have to completely remove the printer and mobile device from the networks and reattach them before they will comunicate.
If none of that works, you may need to call the cloud services department to have them take a look at the issue. You can find the number by logging into your ePrintCenter.com acount and looking under the help section. When you get an agent on the phone make sure to tell them everything you have done, so they do not have you do the same steps. Honestly at this point if it is not working the next step is a semi-full reset, which will cause you to loose your ePrint email address, as well as reset everything back to factory settings on the printer. I am not allowed to share how to semi-full the printer via the forums, however the phone agents can walk you through one.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP officejet pro 8600 plus need to reset, but no screen access due to head error

hi,
I had some HP's 8600 but one of them it is dead as printer and it was replaced.
I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
Im trying to access in order to fix a new static ip for the scan.
Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
Thanks in advance

Hello @Rodrigo_cl,
Welcome to the HP Support Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
Is your printer currently on your wireless or wired network?
Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8600 Plus - Apps Error - 'Connection Error'

Hi,
Newbie question maybe, but it's got me a little stumped.
I've an HP Officejet Pro 8600 Plus on a wired connection to my Sky router/ADSL modem, using a static IP.
when I go into Apps it pulls down a list of the installed Apps OK, but when I select any one from the printer control pad it tries to connect then throws an error. I can;t see a place I should set anythign up.
I have a woerkign hp ePrint Center account, ePrint works (eventually!) when I email docs to my eprint email address, adn also via Google Cloud Print and Apple AirPrint. While it;s not ruining my life, I would like all of the printer functions to work :-)
I can print to a network folder, as long as it;s on a PC, although my NAS it won;t print to for some reason, but I guess that's a further question :-)
Any help very much appreciated!!!!
MF668

Hi MF668,
Try setting an alternative DNS and check if that may help:
Press the wireless icon on the top of the printer screen and locate tis IP address.
Browse to the printer's IP through the web browser on your PC.
Click the Network tab.
Under Wired click on IPv4.
Under DNS Address Configuration select Manual.
Set the Preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4
Click Apply to confirm the change.
Now turn the printer Off and back On and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link--- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14... ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one.
I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully.
Can anyone identify what's going on here and how to correct it?
Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the "Scan Tasks" tab.
4. Select the Scan Shortcut used to scan, then click Edit.
5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
7. Click OK and try scanning again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Macbook Pro running Maverick doesn't recognize Officejet Pro 8600 Plus as a scanner

I am a new user to the Macbook, transitioning from Windows. I started with a preexisting Offciejet Pro 8500 but couldn't get it to work and discovered there were no Maverick drivers. I then bought and installed the Officejet Pro 8600 Plus wirelessly. I downloaded the HP software package for Mac. I can print. I can scan from the printer to the computer. I can use the HP Scan utility (although the HP apps folder also contains the 8500 apps and I'm not sure which is which). However, under System Preferences Printers and Scanners it only lists the 8600 as a printer and faxer; it does not appear under Scanner. And I cannot access it using PDF Converter for Mac, either. And it refuses to scan an entire legal page, stopping at the letter page limits, whether I use the document feeder or just place it on the glass.
( I also cannot figure out how to set up Network scanning - it asks for a folder address and I am not familiar with iOS nomenclature.)

Hi lahrm
I understand you are having issues scanning on the Maverick.
I will be happy to assist you with this.
I have included a document for how to scan on the Maverick.
I have provided a document for connection issues.
This document provides directions for scanning to a network folder.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing wirelessly on officejet pro 8600 plus

I have recently purchased an e printer (Officejet pro 8600 plus). I have set it up on my laptop as well as mobile phone. I have printed photos from my phone, emails from my phone, emails from my laptop, word documents and excel documents from my laptop. It will only print sometimes. I think it may have to do with the printer going to sleep. On my mobile phone, I get a message saying ePrint job delayed because the printer is turned OFF or not connected to Internet. Well, it is on. When I actually go to the room where the printer is located, if I touch the screen and press Apps, sometimes, the printer says "connection error", unable to connect to the server. Other times when I have done this, it does make the connection. It seems that if I wake up the printer, I can eventually get something to print. But that defeats my purpose of the wireless capability. Can you help?

I will need some more information in order to help out. What make and model of router do you have? Does it ever fail regular wireless jobs sent from the computer to the printer? Or is it just ePrint jobs that it fails/delays? Also what is the IP address for the printer?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Upgrade to WIN8.1 has downgraded software capability on HP Officejet Pro 8600 Plus

Help! I upgraded my pc to WIndows 8.1 (64Bit) and now I do not have an option in the software to scan a TIFF file or any photo format except jpg or pdf.
I upgraded my HP drivers to no availe.
Also, I seem to be able to only access the HP software through the Microsoft groups (big graphic squares on my start screen). I guess these are apps that have dumbed down the software for my all-in-one HP Officejet Pro 8600 Plus ?

Hello,
Please try the below steps..
uninstall the printer software.
Restart the PC
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Now really can't print from Officejet Pro 8600 Plus

This is my second attempt to get help. The first help made it worse. I had been unable to print from my wireless printer from my MacBook Pro, iPad, or iPhone. After about 20 hours I got it to print from a cable (it sees my network but none of my devices can see it). So I posted here asking for help and was told to uninstall the software, repair disc permissions, and reinstall the software. But when I downloaded the new software my computer would not install it because it says it is for Mac System 10.7 or less and I have 10.10. So now I can't print anything at all. I need this for work. Please help me fix it for real. I can't take this any more.
This question was solved.
View Solution.

Thanks for providing that information JeanneS1. I have provided some more information that should help us resolve this issue. I know you have already spent a lot of time on this, but I am willing to continue trying to get this working properly over the wireless network.
Power cycle the router, restart the Mac and the printer.
I would print off a Configuration Page to see if the printer still has a valid IP address.
Try to access the printer's Embedded Web Server. If it connects then the printer is still on the network.
If you don't have a valid IP address, once more run the Wireless Setup Wizard on the printer.
Setup a Static IP address for the printer, this way the router will always assign the same IP address to the printer. Which should stop the disconnection.
Here is a document on this issue. But for now just follow Solution two: Assign the printer an automatic static IP address under Mac. Printer Does Not Maintain Wireless Connection.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and delete the old driver, click the + sign to add the driver, you might have to click the drop down to select the printer's name to add it in. (Officejet Pro 8600 Plus)
Here is a screen shot.
Then test the printer.
You might need to update the printer's firmware if you haven't already.
How far is the printer from the router?
Here a few causes of why the printer can lose the wireless connection:
The recommended distance between the printer and the router is 1.0 meter to 1.5 meters (3 ft to 5 ft).
A nearby device that emits radio signals (such as a microwave or cordless telephone) might interfere with the wireless connection.
A virtual private network (VPN) prevents the printer from accessing the computer and wireless network.
The network connection is no longer active, or has low signal strength.
The printer goes into sleep mode or standby mode.
A firewall prevents the printer from accessing the computer and wireless network.
What kind of router are you using?
What kind of security are you using? (WPA2/WPA, WPA Personal, WEP)
What band is the router set to? (2ghz or 5ghz)
I believe by changing these settings on the router will help with this issue if it continues. You might need to contact the router company to make those changes.
Make sure that on your wireless modem, the channels for 2.4Ghz and 5Ghz are fixed and are not set to automatic !!
Select channel 6 for 2.4Ghz and channel 36 for 5Ghz frequency.
Hope this helps get you up and running again.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Configuring "Scan To E-mail" on HP Officejet Pro 8600 Plus N911g

This is the same issue reported by several other users in this forum to which no solution has been provided.
I have been unsuccessful in setting up the scan to e-mail option for a HP Officejet Pro 8600 Plus N911g purchased on August 12th 2012 and using the firmware CLP1CN1150CR.
I am trying to do this through the Embedded Web Server interface to the printer from an iMac running Mac OS X 10.6.8 and HP Utility 5.8.0. More specifically the page under "Scan -> Scan to E-mail -> Outgoing E-mail Profiles".
I have tried 2 different SMTP outgoing servers, each of which works well to send e-mail from the computer: Apple iCloud e-mail service (formerly known as Mobile Me, formerly known as .Mac) and AT&T Net e-mail service. I verified that the server name, port number and authentication login/password values were all correct.
When scan to e-mail is used from the printer, I get an error message: Cannot connect to server. Check server name and address.
When tested from the computer during the setup of an outgoing e-mail profile, I get an error message: The device could not send the test e-mail message. (EmailAccounts-timeout).
When I try to configure the page under "Settings -> E-mail Alerts -> E-mail Server" and use exactly the same values as the ones in the outgoing e-mail profile above, the Save and Test option fails with an error message: The device could not send the test e-mail message.
Interestingly enough, I am able to use the computer's e-mail client with the option Scan To Computer -> E-mail as PDF or E-mail as JPEG. With this option, the file is scanned and added as an attachment to a mail message from the Mail client under Mac OS X. When I press the Send button, the e-mail is sent successfully through the same SMTP server.
All the error messages seem to indicate that the printer's e-mail client software is unable to establish a connection to the SMTP server. However, it is not clear what configuration parameter is the one that could be causing the problem.
This question was solved.
View Solution.

After further research, I noticed that there are other possible default Simple Mail Transfer Protocol (SMTP) port values:
Port 25 is the standard SMTP port number.
Port 465 is the port number for SMTP over SSL, Secure SMTP (SSMTP).
Port 587 is the dedicated port number for a Mail Submission Agent (MSA) that uses a variant of the SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the mail submission service.
I had been using port number 25 as this is the standard one. However, all tests were failing. Hence, I decided to try the tests with ports numbers 465 and 587.
Port number 465 failed with the same errors listed above. However, the tests passed with port number 587. After saving the successful configuration with port number 587, I tried the scan to e-mail option from the printer and it worked.
A mail submission agent (MSA) is a computer program or software agent that receives electronic mail messages from a mail user agent (MUA) and cooperates with a mail transfer agent (MTA) for delivery of the mail.
Historically in Internet mail, both MTA and MSA functions use port number 25. However, many Internet Service Providers (ISPs) and enterprise or institutional networks restrict the ability to connect to remote MTAs on port 25.
With a dedicated port 587, it is always possible for users to connect to their domain to submit new mail. Availability of a MSA on port 587 enables nomadic users to continue to send mail via their preferred submission servers even from within others' networks. Using a specific submission server is a requirement when sender policies or signing practices are enforced.
I know that many users may find the technical details boring or confusing, but I just wanted to include some background to those who actually care about this level of detail. I also wanted to provide a possible solution to other users who are experiencing the same problem.
So, in a nutshell, if the Scan To E-mail option is not working for you using port number 25, then try one of the other SMTP port numbers listed above. If none of them work, check your mail provider for other possible outgoing server port numbers.

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Officejet Pro 8600 Plus e-All-in-One

HP Officejet Pro 8600 Plus e-All-in-One
Windows 7 x86
Ошибка:
Отказано
Сообщение является нежелательным или содержит вирусы
***SPAM***
Все адреса могут писать на него, открытый доступ. Все сообщения кидает в раздел спам или думает, что это вирусы.
Google translate(All addresses can write on it, open access. All messages throws section spam or thinks it is a virus.)

The "spam/virus" message often occurs because the email did not contain any text in the subject line. Please try re-sending an email to your printer and adding text in the email's subject line.
I want to be sure that the information provided has completely resolved the issue. Please reply to this email and let me know whether or not the issue has been resolved. If the issue persists, please include the following pieces of information so that I may assist you further:
1. Are there any attachments being sent? If so, which attachment file type is being used (PDF or Word documents, JPG photos, etc)?
2. Which email address/addresses are used to send ePrint emails?
3. The results of a test email (success/fail) which will help isolate the source of the issue. Please follow the instructions below:
a. Type the word "test" in the subject line
b. Type the word "test" in the email body
c. Do not include an email signature
d. Do not include an email attachment (documents/photos/etc.)
Please include the results of this test email in your reply.
I hope the initial set of steps resolved the issue but look forward to providing you additional support if necessary.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Unable to access Apps on HP Officejet Pro 8600 Plus

Similar Messages

Maybe you are looking for