HT4101 Connecting my lightning to sd card reader accessoire THE iPad air Lets know' this accessory is not. supported by this iPad' could Someren help solving this issue?
Connecting my lightning to sd card reader accessoire THE iPad air Lets know' this accessory is not. supported by this iPad' could Someren help solving this issue?
Thanks for the advice. Unfortunately it didn't work. Have tried both kinds of restore. First restoring from backup and second as a new device (twice). Still get the same "Accessory not supported" message. Thank goodness I can use the old 30 pin SD reader with the lightning adaptor for my up-coming trip. I tried it again and it worked again. BUT I hate having a piece of Apple equipment that doesn't work.
Similar Messages
-
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
every time i connect my ipod touch 4th gen. it says this accessory is not supported by ipod touch so people recommended me to just buy a new charger, so i did, but the night before I got my new charger it stopped charging, what should I do now?
also my power button does not worked it got stuck so therefor it doesn't work, are there any ways i can help it get loose and working again?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Have imported from iPhone to iPad 2 before but now am unable to,,, saying that this accessory is not supported by iPhone,,, but it's an apple camera connection kit
Have you tried resetting your phone and/or your iPad? Hold down the Home and power keys until the silver apple appears. Might help. Can't hurt.
-
I got the camera kit and plug in my Samsung pl55 camera. The iPad eventually says this accessory is not supported by iPad. a matte camera asks me if ! want to connect the USB to a computer or a printer. I select computer but by then it's too late and everything just sits and nothing happens.
Are you using Apple's iPad Camera Connection Kit?
Have you plugged your Samsung PL55 into the kit as shown here:
Are you trying to send JPEG images from the camera to the iPad?
Your post has a portion that starts with " a matte". I don't understand it. Perhaps the beginning of the sentence got omitted. -
Why doesn't my iPhone connect to tv? Keeps saying "this accessory is not supported by this iphone"
I assume you are running ios 8.x. It's a bug.
Wait for a fix from apple. ... OR ... You could buy a new Apple brand connector. The latest connectors will work, even the older apple brand connectors do not work. OR try re-booting your ipad. OR wait until the video starts then attach the connector.
more info here:
Re: 30 pin to VGA adapter won't work since iOS 8
unable to use HDMI adapter after iOS 8.0 upgrade -
My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.
- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display? -
Could someone please tell me the correct lead I need for an Applie Ipod 7th Generation 16GB for a Sony docking station. I bought a Lightning to 30 pin adaptor that fits the dock but not the ipod (this was recommended to me by someone from the Apple shop believe it or not). I need one that will fit the ipod and then slot into the 30 pin dock. The dock pulls out and my old ipod (5th Generation) just slotted straight in, but this slot obviously doesn't fit. It would really help if someone can recommend what I need to use or even if there is one that just slots in or whether I need some sort of cable and can't use the docking station. I've had a lock at the Apple store but just keep getting confused about what does what and can't seem to see anything unless I need an additional cable to slot into the 30 pin adapter I already have?
HELP - CONFUSED.COM!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
Anyone having the same problem with the new OS7? I can no longer load pictures from my SD card to my iPad using my adapter.
Are the card readers apple ones or knockoffs? Unfortunately iOS7 brought with it software that looks for the authentication chip in the cables and docks. If the manufacturer got permission from Apple to make devices then it should be fine, but if the manufacturer didn't get apple's permission then their chip isn't recognized, generating that error.
If your connectors are Apple ones have you tried to reset your device? Hold down the sleep and home keys for about 20 seconds or so until your iPad reboots. Then try again. -
When I connect the 30 pin digital AV adapter to my iPad 2 I get the above error message. I tried reset/ power recycle etc. No joy!
http://support.apple.com/kb/ht4108
Here is the compatibility chart and Adapter Versions...Althought this,many have problems even with the Official product and the Digital adapter.... -
Please help me it a new phone and I am kind of lost. Thanks in advanced
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- If ait has a Lightning connector
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have a apple USB adaptor and I keep getting the error accessory not supported
On the iPads...
1: Make sure the Dock Connectors are Clean and Free of Lint.
2: Try a different Cable.
3: Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Apple Lightning to SD Card Reader no longer working with iOS 8.0.2
I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
If it is just this version of iOS, I do hope that it is fixed in 8.1.The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
Compatibility
Questions about compatibility?
Call
0800 048 0408 or Chat now
iPad models
iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
To sort the iPad suggest you restore the device especially if you did the update ovrer the air -
My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.
-
Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help
Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.
Maybe you are looking for
-
I am using an older ipod touch with version 4.2.1 software (newest available). I am using itunes 64-bit version 10.7 (newest). when trying to connect i get this error message...."This ipod cannot be used because the proper software is not installed
-
Adobe Acrobat Pro X Crashes when Trying to Scan to PDF - Epson Perfection v30 on Windows 7
I am running Windows 7 with Acrobat Pro 10.0.0 I have a Epson Perfection v30 Scanner installed. I open Acrobat, and when I select Scan to PDF, pick the v30 Scanner, and start the scan, it does actually start and complete the scanning process. However
-
Images in Multicolumn Listbox doesn't work as expected
In the attached example, the symbols are getting displayed in the correct order but missing the symbol for the first row. I can manually select the symbol but by default only the 2nd symbol from the provided array list appear. Any idea what's the iss
-
Hi all, I am migrating from KDE to i3wm. I see a huge difference in the rendering of the fonts between kde font rendering and i3wm font rendering. I would like to know how I can get i3wm to render fonts correctly.
-
Is Editing a rendered project in CS5.5 possible?
Is it possible to edited a previusly rendered project in CS5.5? Also, in tutorials reference to accessing the render queue is required but, I can't find it. Help!