HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

Similar Messages

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password. They should be different correct?

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password and logging in to post this. They should be the same password correct?

Deauthorize Audible Account... always appears as a menu selection, even if you deauthorized Audible or never even had an account.
Audible is a different account from iTunes and does not require the same username / password.

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Can two I-4phones have the same user name and password?, Can two I-4phones have the same user name and password?

Can my husband and I share the same user name and password on our I-4 phones?

Yes.. but it can introduce complications.
If you're going to use the same Apple ID for iCloud, contacts, calendars, and photo stream are all shared if enabled.

I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do?

I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do? I have a working apple id, i dont understand, could it be linked to an old account iD?

Hi smccarrison,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful with troubleshooting signing into iCloud:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
All the best,
Jeremy

"Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

Hi,
I have questions about "Accounting-Start" and "Accounting-Stop".
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,

vignesh and BalusC,
following is the code in front controller's doFilter method. is this not thread safe?
        HttpServletRequest req = (HttpServletRequest) request;
        HttpServletResponse res = (HttpServletResponse) response;
        HttpSession session = req.getSession();
        somepackage.User user;
        if(session.getAttribute("user") == null){
            user = new somepackage.User();
            session.setAttribute("user", user);
        }else{
            user = (somepackage.User) session.getAttribute("user");
        }user object maintains all information about a user. if it is in session scope, everything should work fine.
another observation is after some time of usage, both people in different systems are getting same session.getId()
in my logout page i am using
session.invalidate();
thanks,
moses

Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

Hello there cubandope,
If I understand correctly, your iPhone cellular data is dropping periodically, but you can still make calls. I would use the troubleshooting in the following article to help resolve the issue here:
If you see No Service in the status bar of your iPhone or iPad
Follow these steps, testing after each.
Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Restart your device.
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Contact your carrier to check for any network or account issues.
Restore your iPhone.
Thank you for using Apple Support Communities.
Take care,
Sterling

My DigitalPersona Personal is no longer working. It does not appear so I can use my fingerprint to fill in user names and passwords.

The DigitalPersona Personal icon does not come up now that I've installed Firefox 4.0 beta.

I found a reference to workaround on an HP forum that has solved the problem for me. DP does not support FF 4 and the company does not plan to do so in the future. However, there is a Firefox AddOn called FingerFoxSE that bridges the incompatibility of DP and FF 4. I have installed it and it works fine. You will have to manually register all of your user names and passwords again but FingerFox handles the web pages and then calls DP to verify the password instead of having FF call DP directly. I am running Windows 7 with FF 4 final ad DigitalPersona 4.10.3790.
https://addons.mozilla.org/en-US/firefox/addon/fingerfox-se/

All of a sudden I cannot use my email, it tells me user name or password for my email is incorrect

My email sudenly stopped working. I went to check for messages under one of my email accounts and it tells me my user name or password for (my email address) is incorrect. I went into settings and re-entered my info and still wouldn't work. I deleted that email account and re-created it, still doesn't work. HEEELP!

My email was working yesterday. First last night it started asking for passwords now today it won't check mail at all. When I click to check mail nothing happens at all.

HT4314 I am trying to log into the Game Centre App and it keeps telling me I could not connect to Game Centre Server.....it has been like this for 4 days. What's going on?

I have been trying to log onto the Game Centre App to try and combine my son's Hay Day accounts (he somehow has 2 of them now although we used the same Apple ID when we set up his new iPad mini at Christmas). It keeps saying that we cannot access the server. Anyone else have this problem?
Also, why is it that when I set up his account on the new device it game me a different user name?

You can try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
it could be a Apple problem since some other uses have reported the same problem today.

HT4528 My app store shows I need to update the Backup Assistant. I have tried to log into my Apple account and used every possible login I can think of. Apple doesn't recognize anything I put in. I have changed my password/ID at least 20 times. What c

My iphone App Store indicates that I need to update my Backup Assistant. I have tried about 30 times to log into my Apple account using every login I can think of and it continually tells me it is invalid or incorrect. I have changed my password/ID at least 20 times. What can I do?

Use the correct login/password that the app was purchased with.

Project 2013- Trying a to move a task within the project and have it respect new predecessor rather than old one

Ok, I am working on a rather large project schedule.
Before having to upgrade to Project 2013, the file was used in Project 2007.
Basically I am having a problem with moving tasks only to have them still respect their old predecessor instead of just the new one.
Basically I have 4 tasks ( with start dates): Task A: 1st of month, Task B: 5th of month, Task C: 9th of month, Task D: 13th of month.
I would want to move say Task D infront of Task B and have it go A/1st, D/5th, B/9th, C/13th. But all that happens is that the tasks change order but all the dates remain with their original tasks. This wasn't a problem before Project 2013.
Is there any fix for this outside of having to unlink and relink every time I make change?

GarrettW23,
You're right, it doesn't work the same in Project 2010 & later as it did in Project 2007 and earlier. The feature you desire is controlled by the option setting to autolink inserted or moved tasks. As far as I can tell there is a bug that was likely
introduced when manual scheduling was added to Project 2010. Now, if the option is set, two links will be set up, the original link to the old predecessor and a new one to the new predecessor.
I'm surprised this bug hasn't been fixed but I guess it's not something a lot of users have an issue with. Meanwhile, edit your links after drag and drop as Rod suggests.
John

I have done factory reset to my iphone 5c, now i dont remember my id and password so i created a new one. But my iphone is asking to use the old id. Please suggest

hi

Zia78668 wrote:
U can create new id and u can replace it
No, you can't. If the device is in Activation Lock, you MUST use the Apple ID that was used to enable the Activation Lock.

HT2305 Hi! I am trying to update my ipad 4 but it says I need an updated itunes and I just keep going around in circles. Can anyone help?

I am trying to update my first generation ipad and I keep going in circles. Can anyone offer a suggestion?

First gen iPad or 4th gen iPad?
first gen iPads max out at iOS 5.1.1
If your 4th gen says you need an updated iTunes then it's talking about the iTunes on your comptuer. For iOS7 you need at least iTunes 11

I just got ipod touch and it wont go on wifi. i put in password of our home (and i have done this with my iphone and ipad with no problems) and it just keeps spinning on this new i pod touch

my wifi just keeps spinning dosnt seem to connect

- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then back on the router.
- Reset newtork settings: Settings>General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

Similar Messages

Maybe you are looking for