HT4561 10.6.8 printing results in paused printers. Have applied 10.6.8 supplemental update but problems remain. Are there other known fixes?

After applying 10.6.8 Supplemental Update a network printer status turns to paused after a printing attempt. Have deleted and reinstalled printers after the 10.6.8 update but problem reoccurs. I have also installed the Repair10.6.8.dmg package but that suggested fix did not work either. Any other suggestions?

Wuzradioaman,
Thanks for your feedback.
Let me first correct myself. My aunt had bought the MBP from apple store USA for me 1 year ago, but she could have only delivered it to me 2 months ago. Its' a brand new computer. I run OSX Snow Leopard 10.6.7 and keeps warning me to update to 10.6.8. As I said, by the time I have received my computer, I tried to learnd and update it but created problems. So I had to go back to the original version which is 10.6.7. Now, for Mountain Lion I am expected of updating to 10.6.8. I am scared the problem would repeat again.
What can I do? Did Apple release any patch/update to fix the problem?

Similar Messages

  • AC 8 - Does this version come stock with the email widget and print widget?  Are there other non stock widgets I should also purchase?

    Thinking of purchasing AC8 for training and quizzes / assessments.  Does it come with the print and email widgets?  Are there other widgets I might also need that don't come stock in Version 8?
    Thanks
    Tina

    Thanks Lilybiri for your response.  I had a version of Captivate version 7 and had to purchase an email piece separately so I would receive notifications on quiz completions etc.  I just need to know if that would also be the case for the print function and email function in 8.
    Thanks

  • Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

    Question ?
    Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
    It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
    Print head test sheets/head cleaning etc ok  .
    Have tried to to uninstall and reinstall but nothing.
    Any advice, please?.
    ps
    The printer deos not show up on Epsons site but i think I have the software from Apple.
    Not an ideal situation.

    Try a reset >  OS X Mountain Lion: Reset the printing system

  • Are there any known issues with downloadin​g printer drivers?

    Hi there.
    New laptop so I'm trying to download the drivers for our office printer. Using the http://www8.hp.com/uk/en/drivers.html page but when I click on the link for a CM2320nf MFP, all I ever get is a message saying that the page is unavailable. I've tried both the 'find my product' and 'detect my product' routes with no success. I have an Elitebook but that's not the problem as none of my colleagues can access the page either, on Macs or other HP laptop models. Please can you advise. Thanks.

    Hi,
    Probably yes:
       http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​stems-and-Software/Driver-page-for-Elitebook-8440p​...
    I saw few other posts and I believe HP is working on this now.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP printer is in paused status and will not print. HP6520

    How to remove the hp6520 printer out of paused status?

    Hello BJClayton,
    Welcome to the HP Support Forums!
    I would like to offer a hand in an attempt to resolve the paused printer issue with the Photosmart 6520. What is the Operating System installed on the computer, Windows or Mac?
    Also, how is the printer connected to the computer, USB or Wireless?
    If Windows, please run the HP Print and Scan Doctor. This will look into the drivers, software and communication that the printer users and try to fix the paused status.
    Let me know the results, if you are able to run it, and we can take the next steps if any are needed.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • After installing 10.6.8, printer goes to pause mode, reinstalling printer doesn't change anything.

    Printer is an HP 5850 connected to Apple Time Capsule via ethernet, and shared by two Apple Macs each running 10.6.8.  Printer was using HP Photosmart P1000 driver as there is no HP 5850 driver available for 10.6.  Printer was working fine in both text and graphics/photos until software update 10.6.8 was installed.  Now, after starting a print, the printer goes into pause mode.  Continued attempts to resume printing result in printer going to pause mode.  Deleting and reinstalling printer doesn't do anything, nor does installing latest HP printer drivers.  What is going on here?

    The 10.6.8 update changed a number of printer backend services. For many brands of printer this has stopped them from printing, although usually there is an error message associated with the print job rather than the queue simply pausing.
    You can check if you are getting an error by selecting the paused job in the print queue and pressing the blue Job Info button. If there is no mention of a backend failure then you may be able to get your printer working again by simply opening Print & Fax, selecting the HP printer and presssing the minus button under the list to remove the printer. Then click the plus button to add the printer again.
    If selecting the Job Info button for the paused print job does reveal that there has been some sort of backend failure then have a look at this thread. There is a lot of information to go through but there are responses with links to scripts that can recover your previous 10.6.7 backend services, assuming you are using Time Machine.

  • I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020  monochrome)

    I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020  monochrome)

    I had the exact same problem
    It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

  • 6i character mode report migrate to 11g , printing result were incorrect in the same matrix printer?

    Hi All
    We got stuck when our 6i character mode report migrate to 11g.
    We use the same PC to test,  when run 6i report(character mode with 200 column) in legacy system, report result were correct in our matrix printer ,
    When running in 11g, if we directly print report via report builder (without preview), result were correct.
    But running report via preview/screen mode, printing result were incorrect ( not 200 column width).
    We try to adjust PC's printer/paper setting , but our-defined printing option never appeared in printer dialog.
    Is anything(config or some setting) we forgot to do in this situation ?
    Thanks for all your patient response!
    Hendry

    Hi Shahmayur,
    I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
    Rgds
    Bhaskar

  • Wireless printing results in gibberish

    If I am posting in the wrong forum, I apologize.
    However, I have a MacBook that I am trying to get to print wirelessly to a Ricoh MP C2500 here at work. When I "add a new printer" (IP address), it recognizes the Ricoh (even the icon is accurate!). It offers to use the MP C2500 driver and appears to set up properly. The printer will accept the print job and prints. However, the result of the print job is not the page I have selected but rather several pages of what appears to be the driver's instructions to the printer or whatever. I have deleted and added the printer many times, selected different drivers, and downloaded updated drivers from Ricoh website. The result is as above.
    Any ideas would be welcomed.

    Well, I have solved my problem. I found a website that I was able to download a driver package that works with the Ricoh Aficio MP C2500 (as well as numerous other brands and models). If you are having similar problems with printing, try Sourceforge.net to see if their driver package Gutenprint 5.2.3 will work for you.

  • Blue print result

    i have been using my HP D1600 series printer for almost 1 and a half years now ... and suddenly the print results comes out as blue color when printing in color .. But when i use the Printer Services -> Clean the Print Cartridges, the result (fruits) colors comes out OK .. i am using Photoshop CS4 for printing the images ... I dont know how this happen,, please help ... 

    Hi there qeer,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hello I have Adobe CS4 Illustrator, I do large format prints on a Roland SC-540 printer. I my gradients I get bad results. If I have a yellow to white gradient I get blue bands through out the gradient. Is there a setting in the program to change or is it

    Hello I have Adobe CS4 Illustrator, I do large format prints on a Roland SC-540 printer. I my gradients I get bad results. If I have a yellow to white gradient I get blue bands through out the gradient. Is there a setting in the program to change or is it my rip software?

    What color management settings? Color mode? This sounds like you are simply not using the proper profile.
    Mylenium

  • Print playlist looks okay, print result worthless

    When exporting the playlist to PDF everything looks fine.
    But when looking at the final print result, all images are there but not a single letter ....
    v 11.0.3
    windows 7 - 64 bit

    Hello @leonamengel,
    Welcome to the HP Support Forums!
    I understand that you're having an issue printing to your HP ENVY 4500 e-All-in-One Printer from your Windows 7 computer. I would like to work with you today with resolving this issue.
    Now you indicate in your post that you do not have any print options. Just to clarify, are you not seeing a Print button in the program that you're printing from?  If you are, is your printer just not printing for you?
    Have you tried printing from multiple programs?
    In the meantime, can I please have you run the HP Print and Scan Doctor Tool. This Tool will 'fix printing' issues for you. Should any software, driver, or connection conflicts be detected on your computer than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
    HP Print and Scan Doctor
    Once the HP Print and Scan Doctor has completed, can you please try to print again.
    Please respond to this post with the result of running the HP Print and Scan Doctor. Should you still be experiencing issues be sure to include the answers to my questions above in your response. If you prefer to continue on with our Technical Support queue by phone you can reach an agent at: 800-474-6836.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    HP Worldwide Contact
    I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Print Results form assignment in QA33

    Hi,
    When we click print results for a inspection lot from QA33, the pop-up window displays a default form QM_INSP_RESULT.
    I want to know where this form is assigned.
    thanks and regards
    Murugesan

    Hi Murugesan,
    This form is SAP standard form you can see this form in SE71 T-Code.
    For printing result of inspection lot (QA33), just give this form name in the field 'form' under print parameters tab and execute it will ask for output device.Enter device name and print.
    Regards,
    Raja.

  • Why my numbers printing result always a blank page? Need help :(

    Friends, I really need fast response.
    Every time I tried to print my Numbers file (contained 3 tables in 1 sheet), the printing result always blank page.
    And there's this notification:
    Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.
    I'm using Canon iP100.
    Everything's normal when I print my emails or pages file.
    Thanks much before

    Maybe the brute force treatment is not required.
    One may try:
    export as XL file
    import the XL file
    it may clean the annoying oddity.
    Other scheme:
    export as CSV
    import the CSV file.
    It's more severe that the 1st one but it's less than dropping the file
    Yvan KOENIG (VALLAURIS, France) mardi 17 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • Why my Numbers printing result always a blank page?

    Friends, I really need fast response.
    Every time I tried to print my Numbers file (contained 3 tables in 1 sheet), the printing result always blank page.
    And there's this notification:
    Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.
    I'm using Canon iP100.
    Everything's normal when I print my emails or pages file.
    Thanks much before

    for a "fast response", I would re post this in the Numbers forum, where all the users who know that program well ask and answer questions.  Good luck.

Maybe you are looking for