HT4623 Do I have to be connected to pc to update Ipad? I am on Internet but when I click in General to update it says I'm not connected to Internet on my Ipad. I'm on it now typing this!
I have tried to update but keep getting I am not on Internet. I'm on it right now on my Ipad, but when I click update it says I'm not. How do I update?
Check this first, settings>General>date & time>set automatically>on. Make sure the time zone setting is also correct,
Then restart the iPad. If you still can't update or get the message about not being connected to the internet, reset the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
My desktop doesn't seem to recognize that I already have a sync account, so I tried to set up a new one. When I put in my email address, it was rejected as already in use. How do I get past this roadblock?
Hi truckerdude40!
You may have some previous iTunes software still on your computer that would be preventing you from installing or launching the new version of iTunes. Here is an article that will help you completely uninstall iTunes and all related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
And here is the link that will help you download iTunes again once you have completed the uninstallation:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
can't get SAFARI on the internet won't open any web pages ? on my ipod touch
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears-.
- Powering off and then back on the router.
- Resetting network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help
Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
We are using RSC 3 to control RH7 projects. At the moment RSC says I have hundres of files checked out, but when I try to check them in it says they're not checked out. And then it says "No files were found to CheckIn." What could be causing this?
I tried refreshing and rebooting my (client) PC, and it didn't help.
Thanks.I am no pro at this product but when you look in source control, who does it say has those files checked out. Does that user match the credentials that you use to connect to source control. The only reason I ask this is, when I first set this up for my Publishers, I used the default admin account to connect to RSC. Then I created accounts for them and went to their workstations to change credentials. I changed the credentials but they had checked out some docs before that and could not check them back in because they were still checked out as admin. Had to change it back, have them check projects back in and then switch credentials. Hope this helps.
-
I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???
Some of the following may help:
How to enable imap: https://support.google.com/mail/troubleshooter/1668960?rd=1
For your username, did you enter the full name including "@gmail.com"
Do you have gMail 2-step verification turned on? If so, you need to use an application-specifc password instead of your normal password if using a mail app: https://support.google.com/mail/answer/1173270?hl=en -
HELP!!!! My iPOD when trying to sign in to GAMES it says You are not connected to the Internet. Online functionality is not available. HELP!!!!!!!!!!!!!!!!!!
We (my son and me) Setting's we changed to GOOGLE like you said. Listen, we are new tothis and trying very hard to get it to operate. Had it since last Wednesday and still trying to get it to operate. I know it will take time, but it VERY upsetting.
-
when i try to open my itues it says "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct and your network connection is active, and try again"
I am having similar issues except that the store starts to load, then stops, then I only get iTunes Store in gray letters on a white screen. I can access playlist and the other stuff. Like flamesgirl, I contacted them and they just keep sending me links of stuff to try which I had already seen on the Apple website and nothing works. I posted the question on another forum I belong to and one responder said her husband was in an Apple store and asked about this problem as he was having the same issue. They said an update would be coming out soon as they were aware of the problem. Who knows.
-
I have music on one device that I would like to get on another, but when I try to download it, it just says purchased. What do I do?
Did you follow the instrctions in this link?
App Store: Downloading Older Versions of Apps on iOS - Apple Club -
I have an icon on my MAC desktop called disk utility. When I click it on it a message says it is not compatible with this version of OS X. Can I then delete this set of files?
gjspross wrote:
I did upgrade and here is the current version: OS X 10.8.2 (12C60)
I was able to get to and open disk utility through Application> utilities
I thought the disk utility icon on the desktop may be related to my old software. I was going to move it totrash but it had over 2000 files and so I did know if it was still being used or could be moved to trash.
What kind of files are in there? Sounds like a carry over from your last system. DiskUtility should only be kept in Utilities with a shortcut in the dock or an alias on the desktop, idealy.
Cheers
Pete -
I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.
unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]] -
Help me please going crazy, I have my Iphone 4S getting my e-mails from my computer using outlook but when I delete yhem on my computer they stay on my phone, I am syncing via the cloud, Is there a setting that stopps this e-mail from growing on my phone?
For outlook or hotmail emails they use a pop server technology that you can't sync your computer and your iPhone with. You have to unfortunately delete the emails from both devices. It is super frustrating but that is the only way.
Hope this helps. -
I have itunes on my computer and haven't used it for a while and went to click on shortcut and got message that it has stopped working so tried to update, followed all promptsd and it said it had been installed but when i clicked on shortcut again came up with same message. I have tried to uninstall and re install still get same message. Don't know why or what to do? Also tried to set up my dads Ipod Nano on his computer and it wont accept the Australian area code? ????Help Please going insane
Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos.
Maybe you are looking for
-
How do I determine in Java if running local or deployed weblogic server
Using JDeveloper 11.1.1.4.0 I need to determine in my Java code, if I am running my application locally (JDeveloper/Weblogic) or if the application is running on a deployed Weblogic server. The code will be used to determine where to place files when
-
SEVERAL USER BELONG TO THE TABLESPACE I WANT TO EXPORT I WANT TO ONLY WEED OUT THE TABLESSPACE AND THE TABLES BELONGING TO ONE USER. THE USER ALSO WANT SOME OF THE TABLES WITH ALL THE DATA IN THEM AND SOME OF THE TABLES WITH NO DATA IN THEM I TRIED A
-
Photo Albums showing up in iWeb but not in published site
I'm publishing to an FTP server using Transmit. The site address is chrisfitzgeraldmusic.com . All of the other pages publish perfectly, but the photo albums page has never published correctly. In the past, some albums have shown up, others haven't.
-
i have an IDT High Definition sound card that i am trying to set up to use for karoke . I have tried the recording and playback settings- no go. this sound card has is separate software that was preinstalled on my laptop. Please Help!.
-
Hi Experts, I have created a function module which will call a standard function module ' ISU_PAYSCHEME_TERMINATE'. Can any tell me how this FM will work and where can I see its effect? Regards, Pravesh Gupta.