HT4628 After 7 months of flawless performance, my airport extreme has stopped working for my iphone and ipad. Can anyone help, i am not very computer savey.
After 7 months of flawless performance, my allpe airport extreme wi-fi stopped working for my iphone and ipad. I am not very computer savey. Can someome help me?
Thank you,
George N
Do you mean that only your iPhone and iPad stopped working! while other devices (Pc, laptop, etc..) still works?
Similar Messages
-
I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?
Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3 -
Since updating to ISO ate my iPod touch fifth-generation keeps dropping me from Wi-Fi I have an older AirPort Extreme that looks like a white spaceship does anybody have any solutions I have an iPad first-generation and my girlfriend has an iPod touch fifth-generation that she hasn't updated yet and there is no problem with those two units
I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device. This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My 2-year-old Airport Extreme instantly stopped working last night and is flashing the status light. The problem description is that the ethernet cable is not plugged in... however, the ethernet cable is still plugged into the cable modem. I checked the modem by plugging directly into my laptop... it works fine. Is this a common problem? Is there anything I can try other than sending it in for warranty repair?
At this point, before sending it back, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?
Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk -
Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Whats the fix? I am moderately computer literate. Thanks for considering this.
The following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T. -
After activating iCloud "video" no longer works on my iPhone and iPad. How can I reactivate "video"?
After activating iCloud, "video" no longer works on my iPhone and iPad. How can I reactivate "video"?
Welcome to the Apple Community lynntice.
Which part of video isn't working, playback or recording, could you please provide a little more information. -
Airport Express has stopped working, no IP-adress
Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
It can see my Airport Extreme.
Thanks in advance.
Best
Clintcool1968Try resetting the Airport Express.
If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
Do you have it set to "Join" the Extreme network? or something else?
See this Apple doc on how to reset your base station.
http://support.apple.com/kb/HT3728
Also, you would not see it in your Network preference panel in the System Preferences.
You will only see the main network which is your Airport Extreme....
Unless you have 2 separate networks....
How many do you have? -
After updating my apple tv last night, it has stopped working. The light blinks but there is no input to the tv. I have reset it multiple times, have unplugged it, and it still doesn't work. What can I do?
connect it by usb to your computer and restore it's firmware from itunes on the very same computer
-
I can not set up my airport extreme, he's worked over the internet but I can not back up
I can not set up my airport extreme, he's worked over the internet but I can not back up
''donngra [[#answer-685379|said]]''
<blockquote>
''FredMcD [[#answer-685331|said]]''
<blockquote>
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 11.5 r502
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
</blockquote>
</blockquote> -
IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?
Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin... -
Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.
If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.
-
Airport Extreme just stopped working
I have a airport extreme and and Airport Express. They have both been working on the same router for about a year or two. Now all of a sudden the Airport Extreme line doesnt work. I try to reconfigure and get the following message"Airport Utlity unable to find Airport wireless device after restarting." and goes on to say You may need to select your network from the WIFI menu and try again. Don't understand what this means? I have tried reseting the extreme hard and soft still will not find the airport connection or even the ethernet connection. Can these Extremes burn out ? Thank you for the help
It's not the power adapter. If it were, you would have no power at all going to the AirPort Extreme and you indicate that the port lights are functioning.
Power down the AirPort Extreme for 5-10 minutes and then restart the device. If you still see the same symptoms, I'm afraid that there has been an internal electrical component failure in the AirPort Extreme and it will need to be serviced or replaced. -
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
after installing 10.5 window comes up - the window comes up "run or cancel" I click run. It says "Installer completed." click finish (only options) "itunes has stopped working. Check online for a solution and Close program."
Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave
Maybe you are looking for
-
Document not relevant for billing
Hi experts, i want to create a forma invoice for delivery(delivery document type: NL), but i did not succeed. I have already assigned this billing type to NL under intercompany billing. The process of moving goods from one plant to another was also c
-
Hard reboot needed when I try to authorize a website with parental controls
This is the scenario I'm struggling with: My son has parental controls set limiting the websites he can visit. When I try to authorize a website, sometimes safari returns to the "Oops! you're not authorized" page rather than opening the site. When
-
No type in drop downs;instruction boxes w/graphics &no type;can't shut down
When I turned on my PowerBook last night, the type face had changed, my hard drive location designation on the desktop had moved, there are no words in any of the drop down menus or in any instruction boxes (just the graphics). I therefore can't turn
-
Oracle Applications - Application Development Framework
Hi, I am new to ADF. Can anyone give more information from which release of Oracle Applications ERP all the development would be done in ADF? I heard that Oracle is coming out with Release 12 of the ERP early next year. Does it have components coded
-
Hi i have create a procedure to retrieve data and when i compile i receive an error with this "PLS-00394- wrong number of values in the INTO list of a FETCH statement" here is the code vLine VARCHAR2(4000); CURSOR CurseurCRC IS SELECT O.OPPORTUNITY_I