HT5167 when i am updating to 10.7.5, the internet was disconnected, it was partially 83%completed, when I repudiated again, it always fails.what should i do now?
when i am updating to 10.7.5, the internet was disconnected, it was partially 83%completed, when I repudiated again, it always fails.what should i do now please?
Hello all:
Guess what? It was a font conflict all along. I removed a folder of free fonts I downloaded days earlier. Problem solved. No need to wipe out the system and reinstall!
Similar Messages
-
My updates always fail, what should I do?
I have followed Apple’s instructions exactly, including
unplugging and replugging but my Apple TV’s updates fail every time? What should I do?I have figured it out. You must disconnect your Ethernet and use wireless, it then updates fine. Shame on Apple for not telling us.
-
When i tried updating my iphone 4 to the latest IOS version 7.1.1 it was updating until the end of the update where it had an icon which said connect to itunes. When i try connecting to itunes on my laptop it still doesnt program, by the way my itunes has the latest updae. Why is this? How can i fix it?
Hey there Raymondd2014,
It sounds like you had been updating the phone and now it is in recovery mode. Take a look at this info first:
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
If you are unable to get out of Recovery Mode, use the following article to restore your device with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you don't see your device in iTunes follow these steps for Windows.
Thank you for using Apple Support Communities.
Take care,
Sterling -
When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too -
After i updated my terabyte, when i open fcpx 10.1 my hard drive never appears, so i can't open a new library for a new project. What should i do?
Hard drives do not appear in the application. Use File>New Library.
-
I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results
Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Post income crashes when "Waiting to update this Folder" appears in the outlook mailbox.
Post income crashes when "waiting to update this folder" appears in the outlook mailbox (outlook 2007) We have already done the basic troubleshooting of remove the cached exchange mode, this does not resolve the problem. Also we have tried following
on the MS article of basic troubleshooting
http://support.microsoft.com/kb/842284 and KB2000071
Many of the users now are facing this issue. OWA is working fine also mails on Mobile devices are working fine except for outlook client 2007.
Can any one help.
Regards,
Pralhad
PralhadHi,
The Event Viewer can be a great help to determine the root cause of an issue or to find new leads in case regular troubleshooting of Outlook didn’t bring any results.
Open the Event Viewer:
Press Win + R and type “eventvwr” in the blank box, then press Enter.
You may find the Error Entries for Outlook, also Event ID, text description after the crash happens, post the information in the forum and maybe we can find something useful to find the root cause.
You may know more about Event logs from this article below:
http://windows.microsoft.com/en-hk/windows/what-information-event-logs-event-viewer#1TC=windows-7
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
When trying to update my apps I get the message, "unknown error occurred", any ideas how to fix this?
I really thought signing out would do because that works frequently for the unknown error message. Try these two things.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
Or this ... The old stand by....
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015
Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device. -
am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.
If your iPhone was hacked/jailbroken to use a different carrier then the update locks it back again to the original carrier.
-
was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Or it could be an Apple problem and you will have to wait. -
Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
my phone has locked after updating , what should i do now to unlock ? now i don't live in usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .
The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
Buy a new phone. -
Pls help me
My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple HongkongIn iOS 7.1, the setting has changed locations and is in the same grouping with General, Wallpapers, etc. Also, if you have not set a passcode, you cannot see or set Touch ID. If you restored the phone as new and it still does not provide you the option to set a passcode, and then Touch ID, then it is possible there is a hardware error. Since you purchased the device in Hong Kong, as described before, you can only get a friend/relative to take it to Apple, or you will have to do it yourself. Unfortunately that is what can happen when you need warranty work and have purchased a device outside of the country that you live in.
-
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Maybe you are looking for
-
I don't know what to do
-
Need WBS split to AUC and Expanses during settlement (not %wise)
Hi, We have some capital projects settling to AUC but we are also charging WBS for labor costs and travel expanses and offcouse capital costs. Managment wants PS team to Settle labor/travel to CCTR and Capital cost to AUC. How can WBS recognize cost
-
Ipenable=true preference
I am using the following wmi script to insure the DNS registration checkbox is enable, in a startup script. wmic path win32_networkadapterconfiguration where ipenabled=true call setdynamicdnsregistration 1,1 I need to somehow move this to a preferenc
-
Scripts no longer working via Bridge
For some reason, scripts no longer works in Bridge CS4. I've previously installed "Dr. Brown's services" scripts which is available in the "Tools" menu of Bridge. However, when I select some files, then choose this script Photoshop starts up, but not
-
Allow Drag-and-drop Sorting of Your Music
With playlists, I love how you can drag and drop tracks to rearrange your playlist. However, I've noticed the only sortings you can have for Your Music (songs) are by the titles (track, artist, time, album, added). For Albums and Artists, the only so