HT5699 Hi this is my first time doing this

Hello

This is not a CHAT. You have to post your problem giving all the necessary information and you should get some replies.

Similar Messages

  • SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    Please turn off your caps lock.
    See http://support.apple.com/kb/HT1212.

  • W510 First time RAM Installation advice

    Howdy everyone! Now, I've had my Thinkpad W510 for many years now. Got it from the college I went to. However, it's two gigs worth of ram just isn't cutting it anymore with gaming and whatnot and I've decided to add more to it. I've tirelessly looked over the internet and this website and I...just can't understand what I need to do. I'm only getting 8 gigs of ram (two 4 gigs). I know there's four ram slots, but which ones do I put them in? What do I do with the 2 gig that is already in there? Do I put it in another slot? This is my first time doing this sort of thing and I just want to make sure I do it right. (also because I highly doubt any warranty I had, if I ever had any, is still there). Finally, I want to double check if the ram im buying is compatible with the laptop.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231730
    Any help is greatly appreciated!
    Solved!
    Go to Solution.

    DASChaos wrote:
    Thank you both for the help so far! My ID, if I'm looking at the correct thing, is 43192NU.
    And that's a Quad, so it will support four slots  
    DASChaos wrote: 
    EDIT: May have found some. Would these work? http://www.crucial.com/usa/en/thinkpad-w510-series/CT5311304
    That should work, my own W510 was picky with DDR3-12800 modules and would not take a pair or Corsair and a pair of Hynix. So I ended up putting 4x 4GB DDR3-10600.
    But I read other users had no problems at all. So just make sure the seller accepts returns just in case.
    DASChaos wrote:
    So, my understanding of what I need to do is just take off the first cover on the bottom of the laptop and just put the two ram's there? I don't have to put them in like, say, one on the bottom and one behind the keyboard like I've been hearing about? 
    I expect you will find one slot on the bottom and one under the KB, your W510 is not second hand, right?
    /L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
    A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

  • Inside Back Cover Fold-out (first-time question)

    Hello,  I have a new project that I will be starting in a couple of weeks in which I will be creating a 150 page booklet.  What they are requesting is that the back cover fold out so that a floor plan can fit.  What's going to happen is that there will be an ad on the inside back cover but attached and able to fold out will be a floor plan. However, the edge of the Inside Back cover will be perferated so that the floor plan can be torn out, if so desired.
    I have created plain, saddle-stich magazines before, but this is my first go at a perfect bound booklet with a fold out like this.  So these are my questions.
    - Again because this my first time doing this, I was wondering if there is formal name for a back-cover fold out...How is usually referred to?
    - They are unsure if the floor plan is going to take up 2 extra folds or 3 folds beyond that back cover...because I am unfamiliar with this process, i don't know if the printer has to set the amount of folds or if I can make it as many as I want depending on how the floor plan fits.
    - (this question is about setting up the indesign file)
    In normal magazines, the pages are setup in 2-page spreads, with the back cover being by itself.  In order to set up this up, (and let's say the floor plan is set to 2 folds beyond the inside back cover), do I just add 2 pages to the right on the second to last page, and 2 pages to the left on the last page (which I know I can do by unchecking "Allow selected spread to shuffle")?
    Thanks a lot for any advice,  I surely appreciate it.
    Kdubbie

    If your cover is the only thing with a flap/foldout, you can save yourself a whole lot of time by creating a seperate file for the cover. And you can set as many folds as you want, as long as budget isn't an option (folds cost money and using a bigger page size usually affects the cost).
    Set up the cover as one sheet with fold lines (setting a slug area is good for this). The folds for your map need to be smaller than the page size. This link might help: http://indesignsecrets.com/amazing-folding-calculator-pdf.php

  • First time computer builder - using K7N2G-LISR

    Here is my story:
    I am a first time part by part computer builder, I have installed every product except a CPU and Motherboard seperately.  This was my first time buying each part on its own and assembling it myself though.
    The parts I am using are:
    MSI K7N2G-LISR motherboard
    Athlon XP 2400
    512 MB 2700 DDR Corsair XMS Ram
    40 GB Western Digital 7200 RPM HD
    Sony 32x CD-Ron
    Integrated Graphics
    400W Power Supply
    Vantec Aeroflow heatsink
    I had some trouble installing the heatsink.  I had both paste and thermal pads, since it was my first time doing this and thermal pads seemed alot easier, I tried out one of them.  I continued putting the PC together and everything was working just fine.
    I got to the BIOS and messed around with the settings a bit.  I realized I accidently set my HD as slave to the CD-Rom.  I also set it to High Performance, and allocated 128 MB of ram to the onboard graphics.  Before exiting out of the bios, I checked my CPU temp and it was a whopping 64C/148F.  After I powered down, I fixed my HD/CD-Rom to the proper settings, and took off my heatsink.  
    I removed what was left of the thermal pad and scraped as much away as I could.  I then put a little layer of thermal paste on top of the CPU using the credit card method.  I had a little trouble putting the heatsink back on, using its side clip.
    The computer refuses to boot up at all now.
    The diagnostic lights will vary depending on what settings I have, between:
    (R= Red, G= Green)
    R G
    R R
    (Memory Detection Test)
    I don't know how long it is supposed to sit there, but I gave it a minute.  This was the first hang-up I encountered.  I had two sticks of 256 MB so I alternated between the two sticks in different DIMMs, but nothing worked.
    After screwing around and putting the original settings back (with the HD/CD-Rom) I got this message:
    G G
    G R
    (Testing Real Time Clock)
    It hung there for a while too.
    I left the HD/CD-Rom configuration, removed the ram, and got:
    R G
    R G
    (Testing base and extended memory)
    Again, it just sat.
    No matter what I do, I can't seem to get past this stage.
    My question is this:
    Did I fry my CPU?  If not, could you think of something else preventing me from starting up?

    Well it's certainly possible that you did fry the CPU but I don't think so at this point...
    Do this:
    UNPLUG the machine
    UNPLUG the MB from the PS
    Ground yourself if possible otherwise make sure you have touched METAL on the case prior to unplugging it. And don't walk around on the carpet or shuffle your feet.
    Set the HD on the Primary IDE as Single Drive/Master
    Set the CDROM on the Secondary IDE as Single/Master
    Take off your Heatsink and clean it really well and get ALL of the old goo off of it and the processor. Use Orange Clean as I've found it really does the best job. Put the paste (Arctic Silver II if you can get it) back on and install the fan/heatsink again.
    Install 1 stick of memory in slot 3
    Plug in the Floppy
    Plug in the system fans and the power hookups
    Plug in the MB to the PSupply
    Find the jumper to reset the CMOS/BIOS and set it to clear
    wait the amount of time it says in the manual and set it back. sometimes you have to remove the battery to get it to reset so you might just do that first and then do the jumper
    Plug in the PS and start up the system and see what happens.
    If it doesn't start you may have fried any number of things in the machine so you'll have to start replacing them one by one to figure out what the problem is.
    Hope it works tho!! 8)

  • JSF: Accessing Page for the first time

    Hi,
    I found out that accessing a JSP page(developed with JSF tags ) for the first time does not display any output. Either the page has to be refreshed or re-submitted. Am I missing something here or is it a known functionality ?
    Configuration
    Web-Container: Tomcat 4.1
    IDE: Jbuilder 9.0
    Regards,
    Priyesh

    Hi,
    I found out that accessing a JSP page(developed with
    JSF tags ) for the first time does not display any
    output. Either the page has to be refreshed or
    re-submitted. Am I missing something here or is it a
    known functionality ?You need to access the page behind a "/faces" prefix. For example, if you've got JavaServer Faces component tags on a page named "/foo.jsp", your URL should be something like:
    http://localhost:8080/myapp/faces/foo.jsp
    Craig

  • I plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    i plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    Hello there, Shellywms09.
    The following Knowledge Base article points out why you are receiving that message on your iPad:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • My safari won't load. firefox does. have had this computer for 2 years now, first time i'm having issues. what do i do???

    my safari won't load. firefox does. have had this computer for 2 years now, first time i'm having issues. what do i do???

    Going by your profile v10.6.8.
    Reinstall Safari >  Safari 5.1.9 for Snow Leopard
    Then restart your Mac.

  • HT4623 In syncing my Iphone 5 for the first time, Facetime disappeared.  Although it shows up under apps in the settings menu, the application itself does not seem to be there.  What happened?  How can I fix this?

    In syncing my Iphone 5 for the first time, Facetime disappeared.  Although it shows up under apps in the settings menu, the application itself does not seem to be there.  What happened?  How can I fix this?

    There has never been a facetime app on the iphone.
    As the manual says, you access from contacts.  Pick a contact and scroll down to the facetime button

  • HT4061 I had read that Apple will replace a cracked screen on an iPad the first time for free. Does anyone know if this is true?

    I have read that Apple will replace a cracked screen on an iPad the first time it is damaged for free. Does anyone know if this is true?

    apple's official policy is: cracked screens = accidental damage
    With iPad 1 and 2, accidental damage is not covered by any apple care and a replacement iPad starts at $249 and goes up depending on the model.
    iPad3's were eligible for Apple Care + which offers two instances of accidental damage repair for $49 each time
    The 'apple store replaced my cracked ipad for free' is largely an urban legend. It's possibly happened, but those that have been on the receiving end were people that happened to get a store manager that defied Apple's official policy. Not to say it hasn't potentially happened, but it's an exception not the rule. And if you happen to be lucky enough to experience it, that's just what it is, luck. Not something to be counted on or expected.

  • Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

    I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

    I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
    You may get a better responce in the iDVD forum.
    https://discussions.apple.com/community/ilife/idvd
    regards

  • When i signed in for the first time I was charged of 1,98€ without any purchase. Does anyone help me on this?base

    I signed in in ITunes the first time to' access the store but I didn't buy any AppStore or game. I then got a charme of 1,98€ on my balance. Do you why?

    If you input or changed your credit card details then it is probably just a store holding charge which is made to check that the details you input are valid and that the card is active - the charge should disappear within a few days. There is more info on holding charges here : http://support.apple.com/kb/HT3702

  • TS3772 Hi Team, I fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to vi

    Hi Team, I am fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to play movie, any help please for someone who hasnt got a clue

    where did you download the movie from?
    what is it doing when it wont allow you to play the movie?
    since you downloaded quicktime is it still asking you to download quicktime?

Maybe you are looking for