Html edits won't display

i am maintaining and editing a site that was originally created in iweb. the creator did not know about keeping the "domain" file so that is gone.
using Dreamweaver & BBEdit, i have added some pages to the site and all is fine with that. however, i needed to delete text on 2 html pages i did this using a text editor. when i viewed the updated html page on my hard drive it viewed correctly (removed text is no longer visible). when i load the updated html page back to the server (not mac.com) the deleted copy is still visible even though when you "view source" through the browser, the text is NOT in the html code. so i presume that the browser is not finding an older file to display. i have cleared cache, relaunched browser(s) (safari & firefox) and even rebooted the computer several times each.
any suggestions?
oh, i also corrected a typo on a 3rd page, changing the word "from" to "form" and that correction displays properly!!
thanks!
macbook pro Mac OS X (10.4.6)

well...not to my knowledge. it appeared to be html code that i simply removed the unwanted entry.
what i deleted is the 2nd testimonial at this link titled "toothache" by denise ham young. let me know if you see that entry with 2 paragraphs following it. if you "view source" you will find that text is not in the source code.
http://www.ncdinformation.com/Toothache.html

Similar Messages

HTML links won't display in Dynamic Text Field

I am loading external text files in dynamic text fields on my
webage. These texts contain html links (<a href="page.html"
target="_blank">Click Here</a> and I have "render as HTML"
on and "selectable" off in my dynamic text field. Also, I am
loading a CSS file. Not only do I not have a hand cursor, but I do
not even have any of the text from that piece of html code down.
What is going on with this? Please respond asap, as I have been
struggling with this for a day now. Here is the Actionscript for
loading the CSS:
var flash_css = new TextField.StyleSheet();
flash_css.load("styles.css");
flash_css.onLoad = function(success:Boolean) {
if (success) {
zloc_txt.styleSheet = flash_css;
} else {
trace("Error loading CSS file.");
var zloc_lv:LoadVars = new LoadVars();
zloc_lv.load("zloc.txt");
zloc_lv.onLoad = function(success:Boolean) {
if (success) {
zloc_txt.text = this.content;
} else {
trace("unable to load text file.");
zloc_txt.html = true;
zloc_txt.editable = false;
_global.styles.TextArea.setStyle("backgroundColor" ,
"transparent");
_global.styles.TextArea.setStyle("border styles" , "solid");
Here is a sample of the text file code:
&content=<span class="headline">Northwest Arkansas
Locations</span>
121 Main St.
Russellville, AK 77801
(626) 111-1111<br />
<html><a href="
http://www.mapquest.com"
target="_blank">Click Here for Driving
Directions</a></html><br />
Thanks for the help,
Chuck

The error is here:
zloc_txt.text = this.content;
Even if you rendered the textfield as HTML, you still need to
tell flash that the variable you are inserting is HTML. Therefore
you need to use the htmlText property.
zloc_txt.htmlText = this.content;

I did a Sony Vaio Care maintenance and now Explorer works find, Firefox won't open Gmail except in HTML and won't display features on Facebook or parts of webpages. Java is on. Flahs is OK. Explorer works just fine but Firefox will not.

Gmail will not open except in HTML
My homepage ButchNews.com will not display google ads, nor content from some widgets.
Facebook messages will not open.
But everything works fine in Explorer... except I hate Explorer.

I was having this problem too and found an easy fix from another thread. Finally have my firefox back up and running!! See below:
"Easy to fix. Clear your browser cache (Tools > Clear Recent History > select Cache, click Clear Now).
That fixed it for me. I have to do it every time I run Vaio Care."

HTML pages won't display

I've never used Coldfusion and I'm not a web devleoper, I'm a
server admin but I've been tasked with figuring out our problem.
I've been searching all morning and I can't seem to find anything
so I thougt I would post up. Here's what we have. A windows 2003
server with IIS and Coldfusion MX7. We're hosting several web sites
with no issues. Today, one of the web sites will no longer display
.html pages. I've checked all the other sites and html pages are
fine, just this one site. The web dev guys tell me they installed a
java update yesterday to the server and thought that might be the
problem but I would think it would break all the sites, not just
one. I've clicked on every tab and buttion in IIS and everything I
could in the CF Admin but I can't seem to find anything that will
block / filter HMTL pages for that one site. The sever has been
rebooted several times with no luck.
Any thoughts or suggestions as to where I should go or check?
Thanks

So you are saying that the SWF *WAS* actually displaying but was somehow unable to present the text?
For others that may wonder about what TLF is (as I did) I'll save you the Google step.
Click here to view
Cheers... Rick

Webhelp topics won't display on servername with multiple hyphens

Hi
I have several webhelp topics generate with RoboHelp 8 whose html topics won't display when launched from servers whose hostnames contain more than one hyphen. We have multiple servers in the test environment. The servers with zero or one hyphens can launch the help project or individual topics with not problem. The servers with two or more hyphens can launch the project and display the nav pane, but the topics show a File Not Found error. The topics also show this error when launched independent of the frameset. Can anyone help?

William,
I have gone thru my project now and, as I stated in my May 1 mail to you, I have made duplicates of all of the "bad" topics and all of these new topics are now displaying correctly.
Now I have a related, but different issue.
Only one topic is causing that same error msg to display (refer to my original April 27 post: IE script error/syntax error; Line 13, character 1).
The only topic that throws that error msg is the initial topic that displays when the .chm file is opened (i.e., the topic that is specified as the "Default Topic" in the HTML Help Options window when I click the Generate Layout button in the SSL pod.)
Furthermore, the topic that throws the error message will only do so if it is the one specified as the Default Topic.
As an example, if I have the topic Apple specified as the Default Topic, when the .chm file is opened the error msg window will display; when the user clicks either Yes or No to the "Do you want to continue running scripts?" query, the Apple topic will display normally. Each time that topic is selected it will throw the same error msg. window.
If I go back to my project in RH and change the Default Topic to the Pear topic, re-compile the project, when the .chm file is opened the error msg will display; when you click Yes/No the Pear topic will display normally (until it's selected again). The Apple topic now displays fine at all times.
This tells me that the problem seems not to be with the Apple topic, as I'd suspected, but with something that's going on with RH and how it displays the initial topic in a compiled project. I think.
Any ideas on how I can remedy this issue?
Thanks in advance.
Dennis

Closed captioning won't display in html/swf

I have embedded a swf file in html. The closed captioning displays when I view the .swf file and when I view the Flash published html. However, when I view the fully created Web page, the closed captioning won't display. Does anyone have any ideas?
Specs:
The video was created with Captivate 4, published as an .avi and then as an .f4v with Adobe Media Encoder CS4
The .f4v is imported into a Flash CS4 framework.
The closed captioning file was created with MAGpie and exported to a dfxp file.
The .swf file containing all of the necessary files above is embedded in a Web site created with Macromedia Dreamweaver 8.

Oddly enough, I played with the placement of the captioning file to get this to work. While all the other resource files associated with this project needed to remain in the original locations when I embedded my Flash within the html, this file needed to be in the same folder as the base html code for some reason. I hope this helps someone else down the road.

Template page won't display on the web.

One of my web pages was saved as a template and won't display graphics when uploaded, just code. It has the extension dwt. I thought probably what I should do is make
an html page copy and use that. I don't know how that is done, or if that would be the best solution. Any help would be appreciated.

You should never publish your Template.dwt file to the web except to have as a backup in case your Template ever becomes corrupted or lost.
Templates are a proprietary DW file type used to create the rest of your site pages. Go to File > New Page from Template. Select your .dwt file and hit create. The resulting new page is a child page based on that main template. Save as index.html (your home page). Repeat with other site pages.
Add editable content to each of your child pages. Everything outside Editable Regions in the template will be populated to all child pages -- very handy for site wide menus, headers, footers and sidebars.
When you edit a template, you must re-publish all child pages based on that template to your server.
For more details on the use of DW Templates, use F1 Help in DW.
Nancy O.

HTML text no longer displays in text editor

Aloha folks -
We've been using iweb for years now and have used Dreamweaver to edit the html files with no problems. However, it seems like anything we do now no longer opens completely.
Example: Lots of text here. This is shown by viewing source in Safari.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<meta name="Generator" content="iWeb 2.0.4" />
<meta name="iWeb-Build" content="local-build-20081119" />
<meta name="viewport" content="width=800" />
<title>PencilBot</title>
<link rel="stylesheet" type="text/css" media="screen,print" href="PencilBot_files/PencilBot.css" />

<script type="text/javascript" src="Scripts/iWebSite.js"></script>
<script type="text/javascript" src="Scripts/iWebImage.js"></script>
<script type="text/javascript" src="PencilBot_files/PencilBot.js"></script>
</head>
<body style="background: #ffffff; margin: 0pt; " onload="onPageLoad();">
</body>
</html>
Same index.html file opened in Dreamweaver:
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= PencilBot/PencilBot.html" /></head><body></body></html>
That's all I get. Same in Text Wrangler. Text Edit doesn't show ANYTHING.
Seems to be like this for all our iweb sites. All that used to open perfectly fine in Dreamweaver.
And all our Favicons no longer display.
Running iweb 08 2.04.
Any thoughts on this?
Thanks,
Denise

That's all I get. Same in Text Wrangler. Text Edit doesn't show ANYTHING.
You haven't understood what the index.html file created by iWeb does. It is very short and just redirects to the real page, in this case PencilBot.html. That's what you need to open. TextEdit is not showing anything is because you have it operating in Rich Text mode instead of the Plain Text mode required for html editing. Change the settings in TextEdit preferences to Plain Text and check the box for "ignore rich text commands in html files."

Cap3: Edit Audio Timing display's thumbnail is too small

Hello ... Regarding Captivate 3 ...
I'm trying to time my voice-over audio to a series of
application scenario slides using the Edit Audio Timing display,
but am finding it extremely difficult because the small changes in
my slides (radio button selections, text input, dropmenu
selections, etc.) are too small to detect on the miniscule
thumbnail used in the display.
Is this poor interface design, or is there a setting
somewhere that allows me to increase the size of the thumbnail?
I've looked around, but can't find one. How do you handle syncing
audio to stretches of small screen changes?
Regards, Myron

Hi Myron
I won't argue as to whether this is good, bad or indifferent
interface design. But it is what it is and as far as I know it
cannot be changed. At first I thought perhaps we might see a change
if right-clicking the image and choosing "Zoom in". But all that
does is zooms in on the waveform.
This doesn't help any, but you may wish to make the
development staff aware that you would like to see the behavior
change in a future version. You may do this by
clicking
here and completing the form you should find there.
Cheers... Rick

Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

Image with foreign characters in name won't display

I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html:
<img src="../pictures/c�pia de frente.jpg">The page then displays a broken image icon for this image. Images in the same list which do not have foreign chars get displayed accurately. When I choose "show image.." in my browser I see that the image name has been rewritten into the following: c%C3%B3pia%20de%20frente.jpg. The rewriting that will display the image is instead c%F3pia%20de%20frente.jpg. I found the correct rewriting on another of my JSP where the image with the foreign chars actually gets displayed correctly although the code to generate the html is the same on both pages and looks something like this (simplified):
<logic:iterate id="listelement" name="list" property="rows" scope="request" type="org.apache.commons.beanutils.DynaBean">
<%
out.write("<img src=\"../pictures/"+listelement.get("name").toString()+"\">");
                         %> <br>
                        </logic:iterate> Every image that doesn't have foreign chars in its name gets displayed accurately but images with foreign chars in their names won't display. What am I doing wrong?
Thanks
Niklas

Thanks, but it doesn't seem necessary to replace foreign characters. It works without replacing in one place but not in another which is confusing. I think it is something with the enconding but can't see what the difference is between the working and non-working code. In both pages I have put <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">I'd greatly appreciate any more suggestions to solve this problem.

CS4 Live View Won't Display External CSS

I have a simple .html file - all located on my local machine
with an external .css file located in the same folder as the .html
file. Everything displays fine in a browser. Live View won't
display items in my external css file. It displays items in the
inline file fine. If I move items from the external to the inline
file they will appear. Links are relative to the Document in the
site setup. No default images folder defined (images are in a
folder called "images").
I know it's something simple and dunderheaded. Just getting
back into html after a little hiatus. Any help greatly
appreciated.

> If this is a static site, ignore the Live View button.
> Test it in browsers using F12.
Live view will work fine in a static site, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C5713A99.31982A%[email protected]..
> suggestion-
>
> Make every line in the site defintion Correct.
> If not sure what it should be, ask.
>
>
> If you use site root relative paths, enable using temp
files in dw
> preferences->Preview in browser
>
> The link to the external css file is a site root
relative path.
> Change it to a document relative path
>
> There is a pulldown at the bottom of the "browse to
file" dialog box to
> choose linking method.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Preferences window won't display along with other windows.

I am trying to edit my preferences. It only displays a little hint of a window with an X to close it. The same thing for reporting a bug. Basically I have not been able to get one popup application window to display.
I am on Vista Ultimate x64 with dual monitors running in 2650x1600 resolution.
Basically I can't even report the problem as a bug since that feature won't display the window either. Hopefully Apple is monitoring this board.

The same thing is happening to me in XP. I couldn't even log on to this site as a window (probably asking to save my password) is popping up but all it shows is a small title bar with an X. No preferences, can't report bugs or even customize the toolbar.

Itunes won't display my episode descriptions

Hey,
I'm hoping someone can help me out. I'm pretty new at this. I just submitted my first podcast to itunes and the listing won't display me episode descriptions. Would someone be so kind as to check my RSS file?
The URL of the RSS file is
www.indigoimp.com/poweredbysatan/pbscomedypodcast.xml
The itunes listing is
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=123048064&s=143 441
and the line that may be giving me trouble (but which looks ok to me) is..
<itunes:summary>All a man really needs in life is sex, beef, sleep, and a big stick to wack things with. In this epsiode the artist explains why beautiiful women must bring beef. Episode includes his beloved song "You Must Give Me Beef"</itunes:summary>
Thanks in advance!
Chemholio
imac G5 Mac OS X (10.3.9)

Chemholio, welcome to the discussions!
Your <itunes:summary> tag looks fine, and if it's in the <channel> tag, will appear as the podcast description.
If it's in the <item> tag, it will display when someone clicks the circled "i". That's where you have it.
If you want it to appear under the "Description" column for episodes, then you must use the <itunes:subtitle> tag.
Check the example at
http://www.apple.com/itunes/podcasts/techspecs.html
Hope this is helpful.

Html edits won't display

Similar Messages

Maybe you are looking for