HTML Signature that is not viewable by other recipients

I have a signature that I use for my company. It is a png file that is about 7k. Some recipients see the signature logo at the bottom of the emails and some do not. What do I need to do so that all email recipients see the logo?

You sure can!
Here's a tutorial I used to do this: http://allforces.com/2006/04/14/css-signatures/
Basically, you create an HTML signature using CSS. The trick is to put the image online, and point to it in you HTML file. For example, the picture I use in my signature is actually stored on my googlepages site. I found the URL of the file, then used that in my HTML file. When others open the email, the image displayed is from googlepages, not anything that was attached to the email. The downside is that if someone uses a program like Mail, if they look at the email when they are offline, the image won't display.
The tutorial shows you how to replace a signature file created by Mail with one of your creation - a bit convoluted, but it worked.
Lastly, I haven't asked others what they see from their various email providers. Gmail will pull it up with no pictures and give users the option to either display pictures or not. Outlook shows it fine... not sure about anything other than that.
Let me know if you want an example file you could work with if you are unfamiliar with HTML and CSS. I was clueless but found my way using the site above and the various HTML/CSS tutorials available online.
Thanks for reading my novel.
-John

Similar Messages

HTML Signature Problem - Images not showing

Hi all,
I've got some HTML signatures that I use in Mail (v4.3) on Snow Leopard (10.6.4). They were created quite a while ago and have been working fine. BUT... I need to update them to change some of the information. So, I went through the usual rigamarole:
- Edit the HTML file
- Open the HTML file in Safari (v5.0.2)
- Save the file as a webarchive from Safari
- Find the appropriate file in the ~/Library/Mail/Signatures folder
- Replace the file with the new webarchive (renamed)
When I do this, now, Mail will not show the image that I have in the signature (which is a background image placed in the file using CSS and referenced as a URL from my web server).
Does anyone know why the old signature (created the same way, but using an old version of Mail & Safari) works... but doing it all over again using the current version doesn't?
Thanks!

Anything you paste in the HTML is your responsibility. iWeb doesn't care about it. If it doesn't work, too bad.
Perhaps Posterous doesn't like to be displayed.
Ask them.
And instead of pasting garbage (not pretty stock standard) you may want to consider using proper code :
<iframe src="http://hamptoncycles.posterous.com/" frameborder="0" width="900" height="1050" scrolling="no" allowTransparency="true"></iframe
You'll never now if that is the problem.

The graphic HTML signature panel does not appear in my Mac mail

The graphic HTML signature panel does not appear in my Mac mail. I have inserted the signature after reading on the forum. But the images do not download - the rest of the text in the signature is in place - just the logo and the baseline which is a graphic file does not download. Please help.

Hi, are the pics at a remote location, or on your Mac?
Have you tried drag & dropping the graphics on the signature window?

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Is there a way to create new keywords that are NOT subcategories of other keywords in PSE Organizer?

I would like to create a new keyword in the Organizer that is not a subcategory of OTHER.
Specifically I would like to create the keyword PETS, which could in turn have subcategories of different pets.
Currently the only way I can do this is to create PETS as a subcategory of OTHER which I would prefer not to do.
If this can be done, please advise me (in detail) how this can be done.
I am using PSE13 with Windows 8.1 (64-bit) as my OS.
Thank you, in advance, for your assistance.

Hi,
Have you tried selecting New Category from the drop down list?
Brian

Is there a way to add photos to the iPad without replacing the ones already loaded? I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

Is there a way to ADD photos to my iPad without replacing the ones already there? I am trying to add photos from a computer that does not contain photos already synced to the device.

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

IWeb '08 Site - Published to MobileMe Account - Not Viewable by Others

I'm new to iWeb. I created a simple site with a few pages, and then "Published All" to MobileMe. When I view the site, it looks fine. When others try, they get the "Are you looking for something on MobileMe?" page. I have looked at the "site inspector" to be sure that the site is not "private".
I've been reading and reading and can't find a solution. Is there a trick to this?

I got to your site using both of those addresses.
People are probably missing a dash or missing the correct capitalizations. If any of those capitalized letters are typed in lowercase you get that "looking for something" page.
If you want people to be able to type in a simple web address to get to your site, you probably need to acquire a simpler domain name ( from Go Daddy for instance) and then point it to your mobile me account.
I have two domain names registered: www.phelpssculpture.com & www.phelpsculpture.com ( one has two s's and one has only one) these are registered with Go Daddy and point to my mobileme website:
http://web.me.com/phelpssculpture/Site/home.html
So on a business card I can put the simpler PhelpsSculpture.com and people reach my site by typing that into there web browser. The capitalization doesn't seem to matter on the GoDaddy shortened address, but it does seem to matter if you miss capitalize the mobileme address.
Hope this helps,
David

I stay in hotels alot and use my Airport Express to hard wire into hotel network. But hotels seem to have a sensor that will not allow any other device like my I-phone, I-pad to connect. Just one device and that's it. Is there a setting to cure this?

I stay in hotels often and use my Airport Express to hardwire into the hotel's network. This seems to work fine and allows my Macbook Pro to work wirelessly.
The problem is I cannot then hook up my Iphone or Ipad to the network. It seems the hotels have a sensor and only allow one device on their network at a time. Is there a setting in the setup of my Airport Express that might fix this problem?

If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Share a public IP address
Update
You will probably get a message about a Double NAT error. Click to "ignore"
This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

This column cannot enforce unique values because this list or document library may contain items that are not viewable by all users.

The above error occurs when I place unique constraint on a column in a custom list. This error only occurs because the custom list has been configured to only allow creaters to view and edit their own list items.
I just can't see why that should prevent SP from placing a unique value constraint though.
One easy workaround would be to place the unique constraint on the SQL Server table that represents this list. However, in a hosted environment, it is not always possible to gain access to the backend server. What is more, I am uncomfortable with this
approach as it may break other parts of SP 2010.
Is there any other approach?

Hi,
If SharePoint were to enforce uniqueness on a column in a list where users are only allowed to see and edit list items that have created, then you could have a scenario where -
a. user1 tries to add a new item to the list which violates the uniqueness constraint
b. SharePoint reports an error
c. user1 gets to know that there is another item containing the same value in this list
d. this violates the security settings that you configured (each user should be allowed to only see the items that they have created). Now if you change the permissions settings to allow users to SEE all items, but only
edit items that they have created, this error disappears (obviously).
Now getting to the workaround you mentioned (creating a unique constraint on the SQL Server table). This is not going to be possible for numerous reasons -
a. Modifying (or for that matter, even performing SELECT operations on) the SQL Server tables is an unsupported operation and it will definetely break other things in SharePoint, not
to mention that you will lose all support options from Microsoft. However if you don't care about this, then it will still not be technically possible because...
1. SharePoint does not create a new SQL Server table for every list/library.
2. If you did get around to enforcing a unique constraint in the one single table that SharePoint uses for all lists, then you will be enforcing this constraint on each and every list in all the sites and in all the site
collections that are assigned to that content database.
Please "Mark as Answer" if a post has answered your question or "Vote as Helpful" if it was helpful in some way. Here's
why

Downloaded .doc files are gibberish. they have an ext. html attached that was not on the e-mail

How can I correct this?

Do you get working files if you remove that .html file extension and replace it with .doc ?
You probably need to add quotes around the name ("filename.doc") to make Windows accept that new file extension.
See also "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

Acrobat Video Not Viewable By Others

I have downloaded the Acrobat 9 Pro demo to test out the
video options. When I embed a flash video as a url and then attach
the acrobat document to an email, I can view the video after
clicking on it but others in my office cannot. I have put the flv
on an intranet webserver and then an internet webserver. The two
other users see the video control with the button but it cannot be
clicked to start. The flv is only 900kb. The other users have
Acrobat 7. Is this a limitation of the demo version or do they need
Acrobat version 8 and above?
Btw - the other users can see the same flv when it is
embedded as a file but the email becomes too big and the video
still didn't play - they could just see the poster image and hear
the audio.

Dear gregeaus5,
Thank you for your post. These forums are specific to the
Acrobat.com website
and its set of hosted services, and do not cover the Acrobat
family of desktop
products.
Please visit the following forums for any questions related
to the
Acrobat family of desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Kind regards,
Lao Ma

Itunes purchases.... not viewable on other computer device.

I purchased an album in itunes on one of my computers, now I am trying to view my purchase and enjoy it on my other computer but nothing showing up in my library. How can I liesten to my purchases on my other computer device?

Delete and redownload them if doing so is free in your country.
(83028)

IPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

Apple Mail - HTML Signature Help

I created a html signature that I assumed would work in Apple Mail, but when I send an email I get the images and links not showing up with blue ? appearing. The signature looks fine in the signatures menu of my preferences.
<Edited by Host>

Making a fancy HTML signature is a little more involved than that. It's not very user friendly. There are a number of tutorials on the internet for hacking them up. Here is one example: http://www.tuaw.com/2010/10/16/mac-101-making-a-fancy-signature-in-mail-app/ and there are many others.
PS - I have asked the hosts to remove all the personal information from your post. You don't want that there.

Why does DW CC 2014.1 Fluid Grid load HTML file that contains Google Analytics Tracking Code script so slowly?

I exclusively work in Fluid Grid since my site is a Responsive Web Design. I'm having trouble with slow load time in DW CC 2014.1, when my file, as they all do of course, has the Google Analytics Tracking Code script.
I'm on a Windows 8.1 using a Dell Precision M3800 Laptop with Memory 16GB (2x8GB) 1600MHz DDR3 . Each of our site's 180 or so web pages, of course, has its Google Analytics Tracking Code script. It is placed, following Google instructions, as the last entry in the <head>. Google Analytics does not instruct to place the script in the JS Folder with an scr to it, but rather in the <head>. It takes up to one and a half or two minutes for DW CC 2014.1 to load the Google Analytics Tracking Code script . That is, the grid does not show in Live View until finally analytics.js shows up in the Document Toolbar. A minute or two can add up when every page you load takes this long. And, making new Fluid Grid pages, as is done, through the Save As command; every new page made you have to deal with the minute or two wait time since all those pages have the Google Analytics Tracking Code script. Therefore, this time component alone, assuming I'm accessing and/or making 20 pages per week (and in our business this is easily the case) the math is that I'm wasting between 17 and 35 hours per year just with DW CC 2014.1 loading the much needed Google Analytics Tracking Code script.
I have loaded HTML files that do not have the Google Analytics Tracking Code script as a test and those files load at the normal quick speed.
Therefore, the new Chromium Embedded Framework browser engine has a serious load problem when it confronts an HTML5 file with a Google Analytics Tracking Code script. Oddly, the prior DW CC 2014 version, with the old browser engine did not have this slow-load problem since I was loading these same files in that DW CC version up until October 8th or so.
I think this new browser engine is a Google platform that apparently has a problem rendering or loading a Google Analytics Tracking Code script. That makes no sense.
Anyone else had this particular slow-load problem with DW CC 2014.1?
Thanks.

Wow. That sure solved the slow-load problem, at least using your suggested snippet in a simple test HTML file.
Per Google's instructions, I pasted the snippet before the closing </head> tag. And, even in that positioning in the file; the file loaded at the speed (about one second) that it did prior to DW 2014.1.
Two questions.
Will this snippet provide the same tracking data as my current GA snippet?
Because my current GA snippet is in about 200 web pages, can I retain the old snippet in most of them and place the new snippet in my approximately 5 main web pages as well as my templates so my new pages, as well as my main pages, have the new snippet. That is, can I have both snippets (i.e. old snippet in earlier pages and new snippet in main pages and new pages to be made going forward) in my website at the same time?
Of course I would not have both the old and new snippet in a web page at the same time.
I greatly appreciate any assistance anyone can provide me on this issue and thank all of you in advance.
I've provided code for both simple test files below.
Code for Asynchronous Syntax of GA script:
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Test Asynchronous GA Tracking Code In Head</title>
<link href="css/boilerplate.css" rel="stylesheet" type="text/css">
<link href="/css/style.css" rel="stylesheet" type="text/css">


<script src="js/respond.min.js"></script>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-73425000-1']);
_gaq.push(['_trackPageview']);
(function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="div1" class="fluid">
    <div id="test1" class="fluid ">This is the content for Layout Div Tag "test1"</div>
   <div id="test2" class="fluid ">This is the content for Layout Div Tag "test2"</div>
</div>
</body>
</html>
Code for older GA script snippet:
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Test GA Tracking Code In Head</title>
<link href="css/boilerplate.css" rel="stylesheet" type="text/css">
<link href="/css/style.css" rel="stylesheet" type="text/css">


<script src="js/respond.min.js"></script>
<script>
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
ga('create', 'UA-73425000-1', 'auto');
ga('send', 'pageview');
</script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="div1" class="fluid">
    <div id="test1" class="fluid ">This is the content for Layout Div Tag "test1"</div>
   <div id="test2" class="fluid ">This is the content for Layout Div Tag "test2"</div>
</div>
</body>
</html>

HTML Signature that is not viewable by other recipients

Similar Messages

Maybe you are looking for