HTML5 Audio/Video Not working at all on new Windows 7 install

I'm the developer of jPlayer, a plugin for jQuery and my recent testing a new laptop on Windows 7 Ultimate, Safari 5.0.1 found that the audio and video HTML5 elements do not work at all.
http://www.happyworm.com/jquery/jplayer/
http://www.happyworm.com/jquery/jplayer/HTML5.Audio.Support/
My plugin checks for the mediaElement.canPlayType() method and if it exists it then checks the suitable MIME types for compatibility. But that is just the fine details. Basically, the Safari 5.0.1 browser installed on Windows 7, without any of the audio or video support.
Testing on other sites around the web also showed that this install did not include those parts of the HTML5 spec. No idea why. I installed it off the apple/safari site and it is fully updated. Chrome 5, Firefox 3.6, Opera 10.6 all worked fine.
Example of other sites used to check:
http://www.html5rocks.com/tutorials/video/basics/
By comparison, my old Windows XP machine works fine with Safari 5.0.1 and has had a version of safari installed on the machine since Safari 3.
Side note, the Mac versions of all the browsers work fine. Also the iPad emulator shows everything works.
Any ideas what went wrong with my install on Windows 7?
Best regards,
Mark P

I am looking at this issue too. I installed Safari 5.0.1 on Windows XP on two different machines. In these cases I found that the .canPlayType() always returns undefined on an audio element. So http://www.happyworm.com/jquery/jplayer/HTML5.Audio.Support/ showed that no support for HTML5 audio was found. ( http://twitpic.com/2f16nh )
Both installations were clean installs and it was also the first time Safari had been installed on both XP installations.
I don't see these issues on OSX 10.6.4 and others have reported that it worked under Windows 7. My guess then is that is something to do with new installs and not OS.
Mark B

Similar Messages

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

I am using ALSA and Icecat. When I play any html5 audio/video it works, but the next time i click on another audio/video link I lose sound.

I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA
Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click back to the start of the audio/video, the audio returns. I often get cpu spikes for icecat when it happens.
I have tried this with both motherboard and usb sound and I get the same problem. I have disabled extensions (addons) in Icecat, deleted profiles, reinstalled the browser and even installed firefox from the AUR and it still occurs.
I have disable gstreamer in about:config and restarted and it still occurs.
My .asoundrc is this:
pcm.!default {
type plug
slave.pcm "hw:0,0"
All my other audio applications work. I have noticed that if I use pulseaudio it fixes it, but it should work without anyway, like it used to. I think something happened after an update, but I'm not sure.
Any help would be appreciated. I know it's not a big problem, but it's really frustrating and I've had it for ages. I even switched browsers to get away from it.

*nerding out*
I am not an expert in this and if we get stuck I have found a mailing list for the alsa project that can be contacted: http://www.alsa-project.org/main/index.php/Mailing-lists
Gstreamer is disabled in Firefox as well as the os?
Since you are seeing issues with ogg files and moving video/audio combination I started to dig into file formats {sox http://sox.sourceforge.net/soxformat.html}
For ogg would the file format affect the "raw"?
defaults.pcm.file_format "raw"
Updated libraries
alsa-lib-1.0.6-8.FC3
alsa-utils-1.0.6-3
No no, here:
http://oss.sgi.com/LDP/LDP/linuxcookbook/html/cookbook_27.html#SEC377
Is the OGG cpu intensive for your alsa architecture? [http://alsa.opensrc.org/Ogg]
Troubleshooting sound on Linux to narrow down the issue: [http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
References: [http://www.alsa-project.org/main/index.php/Minivosc]
[http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
I am sorry, this is where I can no longer help. Please seek the guidance of the Linux forums or that alsa mailing list.

IE-11 HTML5 Audio tags not working

I have add mime type in web config as below
<system.webServer>
<staticContent>
<mimeMap fileExtension=".mp3" mimeType="audio/mpeg" />
<mimeMap fileExtension=".ogg" mimeType="audio/ogg" />
<mimeMap fileExtension=".oga" mimeType="audio/ogg" />
</staticContent>
</system.webServer>
All others browser is working well, but except IE-11
The DOM display error INVALID SOURCE
PLEASE ADVISE.
Best Regards
Dev - Nick

I found 2 formats,supported by IE11: .m4a and .3ga
<audio src="http://az3749.narod.ru/anna/soundE.3ga" type="audio/m4a" controls/>
<audio src="http://az3749.narod.ru/anna/soundE.m4a" type="audio/m4a" controls/>
also it is possible to rename .3ga to .m4a - it worked.

Photostream not working on pc with new router installed

I have lots of apple products, and photo stream works between all of them, but struggling with them loading to my pc through photo stream.
It was working, on and off for a while. Some pictures would load, some not.
We installed a new router, thought it would fix it, now there is nothing!
Any thoughts?
I have windows vista.
some type of linksys router, I can find out if that's relevant.

Not sure if this will help, but you might check your router settings again this:
Recommended wifi settings
Troubleshooting wifi connections

IChat audio/video not working in a particular scenario.

Three differnt people with 3 different setups trying to do an audio chat:
John: MacBook(2.0Ghz, Leopard), connected via AirportExpress, using an AIM account
Anne: MacBook(2.4Ghz, Snow Leopard), connected via a 3G USB Modem, using a .Mac account
Mark: iMac(2.0 Ghz C2D, Tiger), connected via AirportExtreme, using an AIM account
John can voice and video chat with both Anne and Mark, no problem. But Anne and Mark constantly get the Error-8. (But strangely Anne and Mark can share files via iChat just fine.)
If it was a firewall issue, wouldn't one of the three be excluded from any voice/video chat completely ? Im starting to wonder if it's the NAT/PMP issue as well, cause it doesn't seem to be an issue when connecting to the other person.
I have scoured the web looking for a solution but to no avail.
This is a snippet from the error log:
Video Conference Error Report:
11.657163 @/SourceCache/VideoConference/VideoConference-415.13/SIP/SIP.c:2917 type=4 (900A0015/0)
SIPConnectIPPort failed
13.658210 @/SourceCache/VideoConference/VideoConference-415.13/SIP/SIP.c:2917 type=4 (900A0015/0)
SIPConnectIPPort failed
Cheers

Hi,
Re 1)
iChat makes a Connection that is Peer-to-Peer when doing Audio Only and Video chats.
To do this it uses a method of going through NAT Devices (Network Address Translation)
NAT Is not a standard. It is a vague description of things that happen in most domestic routers to share one IP between many computers and other devices.
There are about 4 main ways of doing it See Here
Realistically iChat can be Fussy as to how NAT is done. (Some methods don't seem to "Play Nicely" together)
So you can get what looks like intermittent symptoms.
Re 2)
I am on a Leopard booted computer and my AIRPORT UTILITY is version 5.5.1
I don't have an Airport Base Station so posting a pic is useless at this point.
The older firmware I am thing of popped up a very small Window asking for the Password before giving you the main window.
The version I have lists the different Base Station it can find down the left with a manual Configure Button and a first time set up button on the right (I forget the name).
It sounds like he has something closer to my version.
The Port Mapping Protocol may be "Greyed Out" if the Device is NOT "Sharing an IP" on the main Internet icon/pane. (On the current version I believe the NAT tab disappears if this is the case).
Re the Zyxel.
Not particularly iChat Friendly as a range.
There is something about them logging in to AIM on Port 5190 on the TCP Protocol and iChat send files on port 5190 on UDP that these modems don't like (Dual use of the same port)
This may be related to Port Forwarding.
With setting up Port Forwarding you point one port to one IP (Computer) (multiple ports one at a time for iChat)
This means that other computers cannot then use those ports (ports Cannot Be Forwarded Twice).
Not all devices specify Protocols to do this but the Zyxels do seem have an issue with and for some reason this crosses over into A/V Chats.
SOLUTION
In iChat go to the Preferences > Accounts > Server Settings tab when Logged out.
Change th Login port from 5190 to 443
This port is memorable as it is below the 1024 threshold in most domestic devices (all ports below this are Open to everyone) and is used by Web Browser for Secure sites (such as Banks and the Sign-in here to post).
It is also used by some mail servers.
The Modem most likely routes.
This means two things.
1) the Airport Base Station should NOT - Set it to Bridge (Off) Mode in the drop down at the bottom of the Internet pane (Port Mapping will not be needed then either).
2) the ports need to be allowed in the Modem.
See this page
This is the instructions to access a P660R-HW T1v2 I am not sure what the difference the HW means
Do the pics look like his set up pages ?
Most likely he will have to Look for UPnP - Try the Advanced menu item.
He will not need the Port Forwarding if he Enables UPnP.
He may have set up pages that look more like these pics EQ 660 R
Here you can plainly see UPnP in the middle menu 9At the bottom)
Summary
Change port for Login in iChat
Set Base Station to Not Route.
Enable UPnP in Zyxel modem. (DO NOT use Port Forwarding despite the Links (they are just for the Pics and Instruction on how to access the device).
If he cannot find UPnP come back to us.
He may have to set Port Forwarding if it is only one computer.
As he is on Tiger he cannot do iChat Screen Sharing so that will not be so much of an issue.
8:36 PM Friday; April 30, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

IChat audio/video not working: bonjour over computer-to-computer network

My girlfriend has a brand new MacBook Pro 15". I have a 3 year old PowerBook. Both running 10.4.9 and iChat 3.1.8. We are currently sitting right next to each other, and yet have been unable to connect to an audio or video chat by any method.
To completely eliminate the router from the equation I created a computer to computer network which she joined. Both of us have our firewalls off, and both of us have our Quicktime streaming speed set to 1.5Mbps. We tried to create an audio connection over Bonjour. I got an error -7 and she got an error -8.
There are many threads reporting the same error, but most of the solutions involve changing router settings. I figured that since this is on a computer-to-computer connection there is no router involved. It would be nice to be able to get this working over the general internet, but I figure if it doesn't work in this very limited setting it will never work. Any help? Much appreciated.

Yep - did that on both computers, to no avail:
Here's the first section of the error messages from both computers. (I can post more if it's helpful.)
Date/Time: 2007-06-09 14:39:41.370 -0500
OS Version: 10.4.9 (Build 8P135)
Report Version: 4
iChat Connection Log:
AVChat started with ID 1641059161.
0x5294770: State change from AVChatNoState to AVChatStateWaiting.
shwayder@oberon2: State change from AVChatNoState to AVChatStateInvited.
0x5294770: State change from AVChatStateWaiting to AVChatStateConnecting.
shwayder@oberon2: State change from AVChatStateInvited to AVChatStateConnecting.
0x5294770: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -7
shwayder@oberon2: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -7
Date/Time: 2007-06-09 14:41:41.469 -0500
OS Version: 10.4.9 (Build 8Q1058)
Report Version: 4
iChat Connection Log:
AVChat started with ID 1641059161.
nicole@nicole-computer1: State change from AVChatNoState to AVChatStateWaiting.
0x4be3e0: State change from AVChatNoState to AVChatStateInvited.
0x4be3e0: State change from AVChatStateInvited to AVChatStateConnecting.
nicole@nicole-computer1: State change from AVChatStateWaiting to AVChatStateConnecting.
nicole@nicole-computer1: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x4be3e0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Seems odd that it doesn't even work on two macs directly connected together.

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Yamaha XG-AC Audio device not working after SP2 for XP was installed

Hi,
i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
Please, could you help me ?
Thanks
Bruno

Hi,
I found another posting in this forum about this issue!
Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
Here are some links which could help you!
Yamaha Generic Driver:
http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
Relevant links:
http://www.yamaha.co.jp/english/lsiexp.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
Happy new year!
TOK

Multimedia Audio Controller not working..... have installed updates and still not workin

Can someone help me with my multimedia audio controller? I've initially installed the updates from the support page and after reboot the Xi-Fi driver is listed. After installed the console update programme for Xi-Fi extreme music the driver is gone and I get a "Multimedia Audio Controller" instead with a error message.
No matter how many times i try reinstalling and uninstalling it doesn't work.

Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

HP C7200 printer/scanner not working with Mac after new router installed.

I recently had my DSL modem go out and replaced it with a combo modem/wifi router. Since the install, my mac can't detect my printer. If I install it via the printer's IP, it'll detect ink levels for a day or two, but still won't print, and won't even detect the scanner. It says the printer is off-line when I try to print. I've rebooted everything, reset the printing system, downloaded updates, and downloaded the latest HP software. Nothing helps. So much for "just works".
My little Windows 7 computer was totally trouble-free after I reinstalled the printer.

If the printer does support Bonjour and it does not appear in the Default Add Printer view then I would say that the Mac is set to a different subnet to the printer (and the Win7 PC). This could also explain why you can add the printer via IP but it won't print.
If the Mac is definitely on the same IP subnet as the printer then check you don't have an application running that could block Bonjour.
With regards to IP queues, ensure you select HP Jetdirect rather than the default of IPP (Win7 will be using Jetdirect which is known as Port 9100). Also, some drivers cannot be used with network connections. If the printer supports Postscript then try a Generic Postscript printer to test. If it doesn't support PS but supports PCL then there is a Generic PCL Laser driver you would try.

Cd Drive not working even after a new drive installed.

Hello
About a month ago i had problems with my cd drive, it wouldn't burn a cd and every time i tried it sounded like the computer was going to take off! I took my computer to the genius' and it was supposedly fixed with a new disk drive put it. BUT i am still having the same problems! is there any way in which it may be a software issue as i am still having the same issues and they are actually getting worse!
Please Help!
Thank You!

You should go back to the genius who installed the new drive. The repair will be under warranty.
Bob

Another spotlight not working at all

I have tried all suggestions from the other post about spotlight not working at all but archive and install. Is there any other way to fix it besides that? What are other people doing to fix theirs?

I have just fixed the same problem on my Powermac, i was not even getting a spinning wheel when trying to search. It is a bit more involved than an archive and install but much quicker, i wouldn't recomend it if you're not familiar with the contents of install packages a little bit. here's the steps:
1. Download and open Pacifist from macupdate.com and after the countdown click not yet and open the install packages from your OSX DVD (there is a specific button for this function).
2. Use the find tool to search for all spotlight files (just search for spotlight)
3. The list of files includes all references to spotlight found on the install dvd including language packs and applications so only the top 22 item are needed. These are the files in the Base system and essensials packages. although if you just did a full install then there is no real harm in doing the language variations etc too..
4. Select the files that you want to install from the search drawer and click the install button. You will need an admin password to complete this.
5. I didn't need to restart but you may want to delete the preferences file at ~/library/preferences/c.apple.spotlight.plist, and repair the permissions before restarting anyway.
Do be careful that your not writing over updated versions of mail or other applicaions that are in the packages, i would advise having a good look through the search results and only installing those components in the base system and essensials, these were the top 22 on my DVD.
Obviously this is at your own risk but it worked perfectly for me. Good luck
SEB
iBook G4 12in (800mhz, 640MB, 40GB) Mac OS X (10.4.3) Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)
iBook G4 12in (800mhz, 640MB, 40GB) Mac OS X (10.4.3) Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)

Just got this Laptop and the audio is not working for videos

My operating system is Windows 8.1 with Bing. I just got this laptop computer for my college work and love it, but my audio does not work when I watch Videos. The laptop makes a weird tappign noise often. I need my audio to work for my course work online. The audio when I watch videos online either does not work at all or it breaks up as I am handling the laptop in the m hands. I have already did troubleshooting tests on the laptop and it can not find any problems but I know something is not right due to the noise and now my audio not working Please help me or tell me how HP can fix my laptop in a speedy mannor. It needs to go to the shop. That noise irritates me and I know that any kind of laptop pc is not suppose to make noises like that. The audio must work for my to complete my college homework and classwork online.
Thank you for any assistance you may be able t give me. Lindsay

Scroll down on the page and fill out the form to contact HP Warranty Support:
https://support.hp.com/us-en/contact-hp/product/HP-15-r000-Notebook-PC-series/6875200/model/7531307
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

HTML5 Audio/Video Not working at all on new Windows 7 install

Similar Messages

Maybe you are looking for