HTTP3068: Error receiving request

Hi,
We have a Iplanet Iws 6.0sp1 web server running in DMZ, which forwards request to a SUNONE 7 based application server which is inside intranet.
Now lately we are seeing that the sunone server.log is throwing the following messages
[20/Apr/2006:05:08:09] SEVERE (23451): HTTP3068: Error receiving request from 10.100.10.231 (Not connected)
Can any one help me out to figure out what could be the probably reasons for this messages coming up. Because I have tested the connectivity between the web and the app server and that is alive.
Please let me know if there is any further information needed.
Nikhil

We had a similar problem in April 2007 though we were seeing 'Connection refused' messages associated with the HTTP3068 error and this appeared to be due to our load balancers doing a reset rather than a graceful close (see OSC Case ID 37837095). We have now replaced the load balancers and the problem has gone away...
BTW, we only saw this in Solaris 10 environments and this has been linked to BugID 6263346 (Synopsis: accept() cannot produce ECONNABORTED error so the connection is just dropped). Basically, the web server is reading on the socket waiting for data from the client -- The receive (PR_Recv) has probably returned -1 and there is no data in the client buffer (this is what the Sun Engineer told me) so hence the error message and that it relates to a problem with the Solaris 10 system call itself and not the web server application. Also, Sun Application Server is affected in the same way.
The Solaris bug which is causing the problem has a very low priority according to Sun software engineering and there were no other customers requesting a fix (apart from us) so AFAIK it is still open -- so the option for us was to move back to Solaris 8 or change the load balancers to handle HTTP protocol connections properly.
BTW, we also had similar problems with the Directory Server product and load balancers filling the logs ....
Hope this helps and I am happy to provide more details if needed.

Similar Messages

Web Server 6.1 Error failure ( 967): HTTP3068: Error receiving request

Hi I have install Sun web server 6.1 on my T2000 system with solaris 10, the web server run the Siebel CRM application, but it is tooooo slow to bring the first page. Takes about 6.07 sec to bring the login page. The log files of the web server gives me a lot of +"failure ( 967): HTTP3068: Error receiving request"+.
Please I need you help

Hello Dear Friend Urgent Programmer
I'am Alfonso Franco member of Sun Developer
that is requested your questions Look:
1 - Please check out your System is ready to download this iPlanet Web Server 6.1
2- Suppose that you System is ready needs to
configure your setup add/remove program in
you computer that matches with the Web Server
3- if continue the problem error after this
analize very fine the problem and for end
we going to create the exact library and
port in it's Servers with a Java Program Database .
well my friend expect that thoses advice may serve something to solve this
problem for more contact to [email protected] to follow helping sincerely as "Good Programmer "

HTTP3068: Error receiving request ip_address (Connection refused)

Hi,
I've noticed many failures in my error log. I use SJSWS 6.1u7. Some example are below:
[04/Jul/2007:11:29:11] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:41] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:35:45] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:37:21] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)The IP address which is noticed in error line is a router of some NAT in my corporation. I want to tune my webserver and receive all request from this address.
Any idea?
Irek

ireneusz.tarnowski wrote:
Hi,
I've noticed many failures in my error log. I use SJSWS 6.1u7. Some example are below:
[04/Jul/2007:11:29:11] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:32:41] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:35:45] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
[04/Jul/2007:11:37:21] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)The IP address which is noticed in error line is a router of some NAT in my corporation. I want to tune my webserver and receive all request from this address.
Any idea?
IrekIrek,
Did you ever figure out how to fix this issue with the Sun Webserver 6.1 that you had back in July last year with the "Error receiving request from <ip address> (Connection refused)" messages? We are getting the same errors on our Sun ONE / Sun Java System webserver version 6.1 SP6. Please let me know.
[http://forum.java.sun.com/thread.jspa?messageID=9751068#9751068|http://forum.java.sun.com/thread.jspa?messageID=9751068#9751068]

JDBC receiver adapter - Error processing request in sax parser

Hello,
I want to INSERT idoc data via JDBC adapter into a MS SQL database. After digging through SAP Help, numerous blogs and forum discussions on SDN and even posting an OSS message I still get the same error:
'Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)'
When testing my mapping in the Integration Repository the resulting XML message is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://prodrive.nl/xi/HRMasterdata/HRMD_A_2_d_bcommerp">
 <STATEMENT>
 <T_PD_Employees action="INSERT">
 <access>
 <KeyTag>00088888</KeyTag>
 <PerNo>00088888</PerNo>
 </access>
 </T_PD_Employees>
 </STATEMENT>
</ns0:Employee>
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Can anyone help me solve this problem? I'm lost.
Best regards,
Roelof Jan Bouwknegt

Hi Bhavesh,
I have tried out the change you suggested. Without success. Message I get back is
- 2006-12-28 10:34:08 CET: Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
structure in testtool:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://prodrive.nl/xi/HRMasterdata/HRMD_A_2_d_bcommerp">
 <STATEMENT>
 <T_PD_Employees action="INSERT">
 <ACCESS>
 <KEYTAG>00088888</KEYTAG>
 <PERNO>00088888</PERNO>
 </ACCESS>
 </T_PD_Employees>
 </STATEMENT>
</ns0:Employee>
Somehow the SAX parser doesn't like the result of my mapping. Maybe there is something wrong with the structure cardinality. Let me describe what I have built:
XSD:
WA_T_PD_Employees - Complex Type
> STATEMENT - Element - Occurence = 1
>> T_PD_Employees - Element - Occurence = 1
>>> STATEMENT - Attribute - Occurence = optional
>>> access - Element - Occurence = 1..Unbounded
Best regards Roelof Jan and thanks for your quick response

SharePoint List Office 365 PowerQuery Error [DataSource.Error] SharePoint: Request failed:

When I open Power Query in my Excel and connect to the SharePoint site that my list(s) reside in the tool displays the tables but when I select the table to pull the data I receive this error
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
My SharePoint version is the SharePoint online 2013 version.
thanks
Andrew
BTW: all the system created lists (like L MicroFeed) in the SharePoint do work properly. I can open them in Power Query and look at the data

GUTN,
can you submit this as a bug in the UI via the Smile Frown button?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

It says i have bars, but i can't call, top up or text, all it keeps saying is error performing request, unkown request. what is wrong and what do i do

like it says in the title, I have a 3GS and i'm with O2, it is saying I have service/bars most of the time full bars, but when I go to text, call or even top up, it comes up with error performing request, unknown error. I can't receive calls or texts either, I can't use the phone side of my phone everything else like iPod, Internet etc is working fine, but nothing is working for my phone.
I've checked my sim card, I've made sure it is in properly, I've turned it off and on. nothing is working
what is wrong with my iPhone why is it not working, and how do I fix it.
Please someone give me some answers.
P.S. I have only had this phone for just over a year.

It sounds like an O2 problem, you'd have to get in contact with them on 0800 977 7337
Have you tried the SIM card in another phone?

Error processing request in sax parser No 'action' attribute found in XML

Hi All,
 I am doing a FILE to JDBC Scenario. I just want to send a data from file to Sql Db table. For this I have written a stored procedure to insert the row in a table.
This is the message mapping for FILE to JDBC .
Sender Receiver
*FILESENDER_MT 1..1 FILESENDER_DT * SPRECEIVER_MT 1..1
 .NO 1..1 xsd:string * Statement 1..1 string
 .Name 1..1 xsd:string *user_PROC 1..1
action 1..1required
 *No
isInput 1..1 string
 type 1..1 string
 *Name
 isInput 1..1 string
 type 1..1 string
Mapped Values....
Statement is mapped with FILESENDER_MT
action attribute is mapped with "EXECUTE" Constant
No is mapped with NO
Name is mapped with Name
for both isInput is mapped with TRUE
for both type is mapped with CHAR
Here is the my stored procedure.....
CREATE PROCEDURE [dbo].[user_PROC]
@NO char(10), @Name char(10) AS
insert into FILE2JDBC values('a','ab')
GO
when i run this stored procedure in Sql directly it was executed successfully....
I have checked In SXMB_MONI status is showing green...
xml messages from SXMB_MONI ....
this is the message from payloads of Inbound Message
<PRE> <?xml version="1.0" encoding="UTF-8" ?>
- <ns0:FILESENDER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
<NO>111</NO>
<NAME>murthy</NAME>
</ns0:FILESENDER_MT></PRE>
this is the message from payloads of Request Message Mapping
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
- <user_PROC>
<action>EXECUTE</action>
- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
this is the error showing in runtime workbench>component monitoring->communication channel monitoring-->Receiver Communication Channel....
Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
Can any body tell me whether the problem is in Mapping or in Data Type Structure..
Please resolve this issue....
Thanks in Advance,
Murthy.

<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
- <user_PROC>
<action>EXECUTE</action>
- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
The Action should be a Attribute of Element user_Proc as,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
- <user_PROC action="Execute">- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
Likewise isInput and Type should be Attributes and not Elements .
Regards
Bhavesh

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

Client-Auth reports: HTTP4031: Unexpected error receiving data: -5938

I am trying to deploy the clientcert sample applcation that comes with the platform edition of SunOne V7.
I have used openssl as a CA and have created client and server certs.
I get the following problem.
 Sun ONE Application Server - HTTP Status 403 Error
 Access to the specified resource (Access to the requested resource has been denied) has been forbidden.
 Type: Status Report
 Message: Access to the requested resource has been denied.
As can be seen from the server.log below, some form of authentication succeeds:
 [12/Aug/2004:08:56:11] FINE ( 2392): X.500 name login succeeded for : CN=tweekes, O=tester, C=ie
Note, common name is that of my client cert.
However there is a severe error:
 [12/Aug/2004:08:56:09] SEVERE ( 2392): for host 169.254.111.12 trying to GET /cert, Client-Auth reports: HTTP4031: Unexpected error receiving data: -5938
Also, HTTPS works with server side authentication and I signed both client and server certs with same private "CA" certification.
Question: Do I need any special extentions in the certs for use with SSL?
Thanks in advance.
server.log fragment:
[12/Aug/2004:08:56:09] FINE ( 2392): for host 169.254.111.12 trying to GET /cert, ntrans-j2ee reports: directory listing for context "/cert"
[12/Aug/2004:08:56:09] FINE ( 2392): Attaching to JVM thread service-j2ee-4
[12/Aug/2004:08:56:09] FINE ( 2392): context = StandardEngine[null].StandardHost[server1].StandardContext[cert]
[12/Aug/2004:08:56:09] FINE ( 2392): contextPath = /cert
[12/Aug/2004:08:56:09] FINE ( 2392): wrapper = null
[12/Aug/2004:08:56:09] FINE ( 2392): servletPath = null
[12/Aug/2004:08:56:09] FINE ( 2392): pathInfo = null
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: Process request for '/cert'
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: Checking for SSO cookie
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: SSO cookie is not present
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Security checking request GET /cert
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Checking constraint 'SecurityConstraint[clientcert security test]' against GET --> true
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Subject to constraint SecurityConstraint[clientcert security test]
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Calling checkUserData()
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: User data constraint has no restrictions
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Calling authenticate()
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Looking up certificates
[12/Aug/2004:08:56:09] FINEST ( 2392): Requesting client certificate from core.
[12/Aug/2004:08:56:09] SEVERE ( 2392): for host 169.254.111.12 trying to GET /cert, Client-Auth reports: HTTP4031: Unexpected error receiving data: -5938
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: No certificates included with this request
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Failed authenticate() test
[12/Aug/2004:08:56:09] FINE ( 2392): for host 169.254.111.12 trying to GET /cert, ntrans-j2ee reports: directory listing for context "/cert"
[12/Aug/2004:08:56:09] FINE ( 2392): Attaching to JVM thread service-j2ee-5
[12/Aug/2004:08:56:09] FINE ( 2392): context = StandardEngine[null].StandardHost[server1].StandardContext[cert]
[12/Aug/2004:08:56:09] FINE ( 2392): contextPath = /cert
[12/Aug/2004:08:56:09] FINE ( 2392): wrapper = null
[12/Aug/2004:08:56:09] FINE ( 2392): servletPath = null
[12/Aug/2004:08:56:09] FINE ( 2392): pathInfo = null
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: Process request for '/cert'
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: Checking for SSO cookie
[12/Aug/2004:08:56:09] FINE ( 2392): SingleSignOn[server1]: SSO cookie is not present
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Security checking request GET /cert
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Checking constraint 'SecurityConstraint[clientcert security test]' against GET --> true
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Subject to constraint SecurityConstraint[clientcert security test]
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Calling checkUserData()
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: User data constraint has no restrictions
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Calling authenticate()
[12/Aug/2004:08:56:09] FINE ( 2392): Authenticator[cert]: Looking up certificates
[12/Aug/2004:08:56:09] FINEST ( 2392): Requesting client certificate from core.
[12/Aug/2004:08:56:11] FINEST ( 2392): Processing login with credentials of type: class sun.security.x509.X500Name
[12/Aug/2004:08:56:11] FINE ( 2392): Processing X.500 name login.
[12/Aug/2004:08:56:11] FINEST ( 2392): Certificate realm setting up security context for: CN=tweekes, O=tester, C=ie
[12/Aug/2004:08:56:11] FINE ( 2392): X.500 name login succeeded for : CN=tweekes, O=tester, C=ie
[12/Aug/2004:08:56:11] FINE ( 2392): Authenticator[cert]: Authenticated 'CN=tweekes, O=tester, C=ie' with type 'CLIENT-CERT'
[12/Aug/2004:08:56:11] FINE ( 2392): SingleSignOn[server1]: Registering sso id '6264FF86CB3151E572951CB77D0C515F' for user 'CN=tweekes, O=tester, C=ie' with auth type 'CLIENT-CERT'
[12/Aug/2004:08:56:11] FINE ( 2392): Authenticator[cert]: Calling accessControl()
[12/Aug/2004:08:56:11] FINEST ( 2392): PRINCIPAL : CN=tweekes, O=tester, C=ie hasRole?: staffmember
[12/Aug/2004:08:56:11] FINEST ( 2392): PRINCIPAL TABLE: {staff=[staffmember], C=ie, O=tester, CN=tweekes=[staffmember]}

The below one is the correct configurations
<If $uri =~ "/my(/passo.*)">
NameTrans fn="restart" from="$uri" uri="/my/jsp$1"
</If>
<Object ppath="/my/jsp/passo/*">
PathCheck fn="get-client-cert" dorequest="1"
</Object>

DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error.

Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName


I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count:   1
Bytes Sent:      107  (headers:107; body:0)
Bytes Received: 107  (headers:107; body:0)
Tunnel Sent:     3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup:   176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance

*** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.

Hello All,
In our development system, we are able to perform all the transactions normally(SAP level) and there is no performance issues..
We have checked from OS level in work directory file dev_disp..
We are getting below error.
Can you please suggest us on this..............
=========================================================
ERROR => DpRqCheck: T72 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 72 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8012 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53650
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T73 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 73 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8013 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53651
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T74 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 74 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8014 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53652
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T77 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 77 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8019 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53653
-IN-- req_info MS_ERROR
Wed Apr 7 08:55:32 2010
***LOG Q0K=> DpMsAttach, mscon ( ussapdir00) [dpxxdisp.c 10127]
Wed Apr 7 08:55:33 2010
use SAPLOCALHOST=<ussapdir00> as internal hostname
NiPAccept: accept failed (socket=7;errno=72)
***LOG Q0I=> NiPRead: recv (73: Connection reset by peer) [niuxi.c 928]
SoftCancel request for T45 U8133 M0 received from REMOTE_TERMINAL
Network error of client T46, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T46 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8135 MKK27890 46 BREWL07D4359) [dpxxdisp.c 9830]
RM-T46, U8135, 620 MKK27890, BREWL07D43598, 08:43:19, M0, W4, , 2/0
Network error of client T45, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T45 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8133 RR606033 45 BREWL07D4359) [dpxxdisp.c 9830]
RM-T45, U8133, 600 RR606033, BREWL07D43598, 08:38:22, M0, W0, SPRO, 2/3
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
MBUF state ACTIVE
Wed Apr 7 08:55:39 2010
ERROR => DpRqCheck: T45 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 45 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8133 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53678
-IN-- req_info LOGOFF CANCELMODE
Wed Apr 7 08:55:44 2010
ERROR => DpRqCheck: T46 in stat TM_SLOT_FREE [dpxxdisp.c 5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c 4623]
-IN-- sender_id DISPATCHER tid 46 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8135 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 53676
-IN-- req_info LOGOFF CANCELMODE
======================================================================
Thanks in advance..
Best Regards,
Kiran

Hi Kiran,
It's not a problem or error, it's just a message and hence can be ignored. However you can check out SAP note 1111154 once, it will fix the issue probably if it's happening due to HTTP problem. Else you can very well ignore it.
Regards
Sourabh Majumdar

Executing function module gives error "Portal request failed: Connection fa

Dear Experts,
I have a Function module Z_SAT_CREDITLIMIT_CHANGE which in itself accesses the SAP Update Function module
UPDATE/INSERT of the credit limit(CREDITLIMIT_CHANGE)
and writes the changed data to the Table KNKK(Customer Master Credit Management : Control Area Data).
While executing this fn module Z_SAT_CREDITLIMIT_CHANGE
from VC storyboard i received error "Portal request failed:
Connection failed: Nested Exception: Native Connection to backend system is broken" . Z_SAT_CREDITLIMIT_CHANGE executes fine and updates data in ECC system.
Than i noticed further that while commenting the part of code in Z_SAT_CREDITLIMIT_CHANGEwhere call to fn module CREDITLIMIT_CHANGE is made there's no error recieved and Z_SAT_CREDITLIMIT_CHANGE executes without error but obviously no data is updated.
Appreciate if any one can please explain how can i use CREDITLIMIT_CHANGE in Z_SAT_CREDITLIMIT_CHANGE
without any errors.
Kind Regards,
Robin.

Hi Robin,
Also, check that the user with the one you're accessing to the backend have permissions to execute the Dataservice at the backend system.
You should check the usermapping to know which is the user at backend.
Best Regards,
Luis

Client-Auth reports: HTTP4031: Unexpected error receiving data

I noticed that the below error logged in errors log
trying to GET /my/jsp/passo/, Client-Auth reports: HTTP4031: Unexpected error receiving data (End of file)
I configured obj.conf for the above one
<If $uri =~ "/my(/passo.*)">
NameTrans fn="restart" from="$uri" uri="/ap/jsp$1"
</If>
<Object ppath="/my/jsp/passo/*">
PathCheck fn="get-client-cert" dorequest="1"
</Object>
Please correct me if i am wrong in the configuration. If i removed those lines it is started working. but i am not sure this will enforce the request to provide certificate from the client.
I highly be appreciated if any one responded.

The below one is the correct configurations
<If $uri =~ "/my(/passo.*)">
NameTrans fn="restart" from="$uri" uri="/my/jsp$1"
</If>
<Object ppath="/my/jsp/passo/*">
PathCheck fn="get-client-cert" dorequest="1"
</Object>

Exchange 2013 in Mac Environment - iPhones recieves email, Mac Outlook does not, OWA Error: Your request cannot be completed right now. Please try again later.

We are having some problems in Exchange when customers send us emails with large attachments. It doesn't happen all the time which is weird.
The emails show up fine on iPhones although it is very slow to show the whole email and attachment.
In OWA it gives an error - Error: Your request cannot be completed right now. Please try again later.
The emails never make it to our computer email program, Mac Outlook 2011

Hi,
What’s your Exchange 2013 version?
According to your description, I understand that the message which is sent from external customers with large attachments can’t be opened in OWA and Outlook for Mac for Exchange users. Is it rights?
If that is the case, please confirm if the issue only happens with the large attachment messages. Please confirm if the message with no attachment sent from the same customer can be received and shown correctly in OWA.
Please recycle the application pools in IIS Manager to have a try. If it doesn’t work, please change the OWA to use Conversation view then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

HTTP3068: Error receiving request

Similar Messages

Maybe you are looking for