HU - Physical Inventory

Hi Gurus,
I have a problem with HU inventory.
When I create a TO, the systems creates a PICKHU which is considered as a Storage Unit.
Then I empty this Storage Unit, but it stays as a Handling Unit in my system.
If for some reason I need to do a physical inventory for this handling unit (HUINV01), and when it is empty the system tells me "No handling units found with the required criteria".
However, when I do the same with material in it, it creates an inventory document.
It seems that the system cannot do a physical inventory of this HU if it is empty.
When I go to transaction HUINV06, it gives me the same message "No handling units found with the required criteria".
Does anyone has an idea on how I could do a physical inventory on this HU ?
Best regards,
Remi

Hi,
When I empty the SU, in transaction HUMO, it still can see the HU with the same number as "free HU" but it is no longer a SU.
I'm doing this inventory in order to complete stock in a complex process that we are implementing.
My client needs to be able, in a box associated to an outbound delivery, to confirm with differences during asignation TO in the 2nd step of picking.
With HU, you can confirm TO with less quantities from an HU, and this quantity goes to Storage Type 999.
But when it comes to the confirmation of higher quantities, we have to do an inventory of the pickhu in order for the system to let us take more quantity than the picked one.
In my process, the client can work with different IM groups at the same time in a storage that is not dynamic (2 step picking process).
So as long as there is stock for the material in the storage bin, we're taking it from any pickhu of any of the groups we have.
But in the end of the process, if we have picked all the stock of the material of all the existing pickhu in the storage bin, when we want to do an inventory of the last pickhu in order to be able to pack the whole higher quantity, the system is failing because all the pickhus are empty and the system does not let me do an inventory.
I know it sounds a bit difficult but I cannot explain the whole entire process.
Thank you very much for your help.
Regards,
Remi

Similar Messages

Need help in creating a Physical Inventory Document with HUs given

Hi Gurus,
There is a problem I am facing while doing a ALV report.
I have created the report and there is a button which i have fixed which has to create Physical Inventory Document.
The scenario is:
I will select the records in the report based on the Vessel Bill Of Lading (VBOL) (related to Batch characteristics of a material) and then i need to pass those values to create Physical Inventory Document.
I got a functional module HUINV_DOCUMENT_CREATE which will create the document but I am not clear what are the values that I need to pass in this.
Or do anyone know how to create the Document by passing HU (Handling Units) and Plant & Storage Location?
Please help me in the same.
Thanks and Regards
Vipin Das V

Hi ,
Just Pass the table of Handling Unit .That's all.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 28, 2008 5:12 PM

Physical Inventory Movement Block not Rest at Storage Location Level

Hi,
We are facing a typical problem in our Production System and the issue is as follows:
1. We have created a Physical Inventory Document for a material with Freeze Book Inventory and Posting Block indicators.
2. We completed the count and entered the same with reference to the PI Document.
3. We reconciled and posted the differences in the system.
4. We still find that in Material Master the Physical Inventory block for material movements was not reset automatically at the Storage Location stock view.
Please help us urgently as all our Goods movements for this material are held up.
Thanks

Hi,
I am able to see 4 PIDs in MI22 for my material.
2 docs pertaining to the latest Annual Physical Inventory in 2010.
These documents are for the same material in the same plant but for different Storage Locations. Out of which when i see the Material Master - Storage Location view, i see that the Physical Inventory Block "X" is set for one of the Storage Locations.
The PID for the Storage Location with this Physical Inventory Block for Movements indicator, is already settled (Count done and no differences in physical and book stock in this storage location).
The problem persists and i need to remove the posting block which was not reset.

Physical Inventory at Storage location level

hi.,
Environment ECC 6.0
Our suggestion on Physical inventory at the client site was as per SAP
"If the flag for posting block is set then no movements can be posted for that material. Note that the inventory document should be created at a material / plant / storage location level so as to not block that material at other storage locations. If a block is not required then do not flag the Set posting block indicator. It is always prudent to restrict the amount of materials being counted and to clear the count results quickly so business is not interrupted"
CLIENT feedback: " Like wise we asked the client to make the selection by Plant = 1000, SLoc = 100, and WBS =2312-344-332 and checked Posting Blocked.
My understanding was that this selection would block only the 1000/100/WBS location.
Client is having a problem is that people trying to transact in a SLoc other than 100 (200, 300, 400) are experiencing the Blocked warning.
I know I heard that we can inventory a Storage location in SAP and lock it and the rest of the sites could continue without interruption.
Any suggestions on how we can achieve this.
Tx

Hi,
Are you setting teh posting block at the time of creation of physical inventory document or by running MI32 later?
If you are running MI32, then ensure that you enter teh storage locations correctly, else the material irrespective of storage locatioons may get blocked.
Hope this helps

T-code WV31 create physical inventory for vendor consignment stock

Hi all,
I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
Best regards
Sameera
Edited by: Sameera on Dec 23, 2011 7:07 AM

Hi,
If i do physical inventory for 2 quantity.
1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
If i issue 4 quantity
2. Consignment Payables account credited with 4 qty.
If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
But I want to settele for 4 quantity.
Thanks,
Maruthi

Error while creating physical inventory document with zero count

Hi,
I am trying to create a physical inventory document for a material that has zero stock and that is not batch managed but I am geting an error as below.
"Item 001: No batches that can be included in phys. inv. exist.(Message no. M7701)"
This error occurs only for one or two materials.
I am able to create the physical inventory document for other materials which is also zero stock and there is no batch managed for the same.
Can anyone pls advice.
Regards,
Ramya

hi
if your material is split valuated, but not batch managed, then the split valuation type is shown in field batch number. And...it is a batch then.
To be able to do a zero count you have to have a batch record whose batch number is the valuation type.
If you never had stock in the storage location you want count, then you have to
1. extend the material to this storage location with MMSC
2. create the batch record with MSC1N for this storage location.

Error while activating WM Physical Inventory doc..........

Hi All,
While activating an WM physical inventory doc (LI02N) I am getting error as follows:
"Number of allowed bins exceeded after storage bin 01-01-01
Message no. L4063"
Warehouse in SU Managed & has Bin-Sectioning upto 3 -sections.
Kindly let me know if any more data is required.
Regards,
NVK

Hi,
I think it is because of the maxinum number of items limited for your warehouse in the SPRO setting LE -> Activities -> PI -> Define differences and document limits. Check the max number of bins/quants allowed per PI document for your warehouse.

Error While Doing Physical Inventory (Customer Stock)

While doing the Physical Inventory for the Customer Stock, the following error is coming:
Fld selectn for mvmt type 701 / acct 45500000 differs for Profit Center (042)
Message no. M7093 Diagnosis Comparison of the field selection strings from movement type 701 and G/L account 45500000 has revealed that there is an incompatible field selection combination at one or more points. Field for which the field selection is different: Profit Center Example On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed. System response You cannot post this transaction, unless you have changed the field selection adequately
Pls. help in solving the problem.
Regards,

Hi,
before you go any further you should first check with your finance team that the correct GL account is being proposed. the reason that the fields don't match may be caused by the fact that the wrong GL has been set up in the auto tables (Trans event Key GBB, account modifier INV and whatever valuation area and valuation class is relevant).
If the GL account is found to be the correct one then you need to get someone from the FI team to change the field settings on that account to enable the correct data to be linked to it.
None of this is the domain of an MM consultant apart fron the auto account tables and so please do involve your FI team before you do too much.
Steve B

Material blocked due to a physical inventory

Hello,
I have an issue.
I have done a stock take via MI01, MI21, MI04 and finally MI20!
When I afterwards create a delivery with one of that part that was counted it gives me an error message saying:
M7100 - Material xxx blocked due to a physical inventory
When I look into the inventory document it says: Counted, adjusted.
While debugging I found out that the process somewhere checks MARD-SPERR which is X for that part and therefore outputs messsage M7100! But X only indicates that posting block was set while physical inventory was done!
Does someone have an idea? Is there maybe a report to verify and correct inventory status?
Hope someone can help, cause I've counted a hundreds of parts which are now blocked.
Thanks for your reply.
Wolfgang

Hello Wolfgang,
If you enter the differences for your physical inventory documents against those materials, then the posting block check shall automatically go off and you can do the material movements.
First, you need to check whether you posted the differences for the respective physical inventory document.
If not you need to post the difference first as it may lead to data inconsistencies.
To remove the posting block go to MI02, enter the physical inventory document number and year, now go to Header and untick the posting block check box.
Posting block indicator
The indicator remains in the physical document header even if the stock is unblocked through the posting of inventory differences. It then only indicates that a posting block was set for the documents.
The blocking indicator can be set in one of two ways:
Directly upon entry of the physical inventory document (if the count is to take place immediately)
Shortly before the count (if the count is to take place later)
You can set the indicator by choosing Physical inventory document -> Change in the header data of the physical inventory document or via batch input.
Now you can create delivery for the materials.
Br,
Tushar
Edited by: Tushar Patankar on Jan 24, 2011 5:30 PM

Posting a physical inventory document

Hi Experts,
My colleague was posting a physical inventory doc through transaction MI07 last month, January. However, we got an error which says period 012/2009 is not open for account type S and the G/L account. I noticed that the posting date of the inventory doc is by december. in addition to that, we could not open the 012/2009 period. we tried posting it this month but we still got the same error. I appreciate any comment regarding this. Thanks!
Edited by: Bryce Larken on Feb 25, 2010 9:25 AM

there are 2 requirement, the posting period in finance (OB52) has to be open for postings, and the MM period has to be open for posting.
In MM you can only post to current and previous period. Even you still can post to last year in Finance, MM does not allow this anymore as we currently have February and december is not the previous period to February.
Hence you have only one option; Delete the inventory document in MI02, and create a new inventory document and conduct the count. Take it as learning experience. Next time you will post documents in the SAP given allowed time frame.

MB1C and Physical Inventory

Hi experts,
I have try to Post one material using MB1c using 561 movenent type,while saving it gives a message"Delivery 180000014 created". I dont know how this message is coming and the stock also not get updated.
Then by using transaction code MI01 for the material it saying error message"Phys. inventory document cannot be created
Message no. M7450
Diagnosis
A physical inventory document has to be created, but the storage location is subject to handling unit management.
Physical inventory in Inventory Management does not support handling units.
please advice
regards
s

Hi
For MB1C
Try to understand whether a materia document has been created or not.
For this aim check MB51 with relevant parameters (that you have done MB1C such as material number,mov. type:561, posting date etc)
If not then this shows that it hasnt been done i mean no update.
Try MB1c again
For the other issue
You can use all the functions of Inventory Management, with the exception of the following:
u2022 Physical inventory in Inventory Management does not support Handling Unit Management.
check:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Hope will help
Best Regards

Transaction code for mass creation of physical Inventory document

what is the transaction code for mass creation of physical Inventory document.

MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
MICN can create several documents at a time for cycle count.
Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

API for Physical Inventory Tag Count

Hi , Please let me know if any Public API available for updating the physical Inventory tag count ? We have requirement like update of physical counts of Inventory tags, the idea is the counts are stored in flat file is in same column format of Physical Inventory Tag count form in Inventory , here just we need to update the counts. let me know any public API avaialble

According to the oracle knowledgebase, there is no Public API. But there is an enhancement request that you might want to add your company to.
Bug 3611131 : INTERFACE/API FOR PHYSICAL INVENTORY ADJUSTMENTS / TAGS

How to populate list of materials in IM level Physical Inventory document?

Hi,
Suppose we have maintained 1000 materials in storage location ABCD. Now when I undertake physical inventory process at IM level, I have to create physical inventory document for this storage location ABCD and I will have to input all these 1000 materials manually for count process in the document.
Is there any other way whereby if I select the storage location, all the materials which are maintained in this location will get automatically populated in the physical inventory document.
Thanks in advance,
Sanjog

Hello,
SAP provides standard transaction MI31 to create Physical inventory documents. In the selection screen, you may enter your storage location to include all materials of that location.
Thanks,
Venu

Tcode:MI 21 physical inventory

Dear all...
in Tcode MI 21 under SYSTEM LIST SAVE LOCAL FILE is dimmed
what is the solution for this issue?
Thank you

Hi Hassan,
System will not allow for saving into a local file. This option is not given as for Physical inventory has to be checked by document printout only.
As this is a audit, local file saving is not allowed
Cheers
Kris

Urgent: regarding physical inventory report display

hi,
i had made a report in which i have to display the physical inventory report details in which details about the material is to be given.
I want to check the details which are present in the tcode MI07 . Can anybody tell me any tcode in which i can see the details of mi07 tcode(including the reason of it).

Greetings,
It might shed some light to read about the display in your portable computer: http://en.wikipedia.org/wiki/LCD
LCDs are primarily plastic panels with various layers inside. Pressure applied to those panels can cause them to crack, leaking the liquid crystal components about. Pressure could be heavy books in a bag pushing against the screen, heavy cat sitting on a closed lid, dog, other animal, someone slamming the lid, child running through the room, etc. This applies to any LCD whether it be in a computer or in a Television (don't press too hard on your TV screen!!).
Displays don't exhibit the type of damage you indicate by themselves. A single pixel might go dead in an LCD but zig zag lines indicates cracking of the layers inside the panels themselves. Something from the outside world made an impact on the display resulting in the damage you see. You may not have been the one pressing hard on it and you may not have seen it happen, but something happened.
The 1 year limited warranty and AppleCare protection plan offer coverage for component failures, not damage.
Coverage for damage would be provided by something along the lines of insurances (home owners, renters, etc.) If you purchased this computer with a Credit Card you may wish to contact your Credit Card company. Many cards have included insurance for purchases you make so even if an item is damage during your use of it, they will cover it.
Best of luck.

HU - Physical Inventory

Similar Messages

Maybe you are looking for