Human Task Events's Validation Callback Errored out  while using EJB method

Hi All,
We are using weblogic version 10.3.5. and Jdev 11.1.1.5.0
In our BPM Process we have human tasks,in human task Events,we are using Validation Callback to save and get some information.To save and get information we are ejb.
1)We have created one BaseTaskValidator.java which implements ITaskValidationCallback.
2)we have override the validateTaskOperation() method in BaseTaskValidator.java
3)We have created one more TaskReminderService.java extends BaseTaskValidator
4)In TaskReminderService.java,when we trying to get information from Database with help of EJB we are getting the below error.
[2012-10-14T21:05:47.610+05:30] [soa_server1] [ERROR] [] [oracle.soa.services.workflow.task] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: Amar.Kant] [ecid: 1416ca41dee3590b:5c59d6e4:13a59f6159b:-8000-0000000000021e0b,0] [APP: soa-infra] [composite_name: ARCN] [component_name: CNRequestTask] [component_instance_id: 204583] [composite_instance_id: 1470009] <.> Error in invoking task validation callbacks.[[
Error in invoking task validation Java callback com.atc.arcn.callbacks.BaseTaskValidator.performCallbacks for task 204583. The task is associated with workflow default/ARCN!1.0/CNRequestTask.
Make sure that the task validation callback class is specified correctly without any errors. The class name should be fully qualified. Also make sure that the class and its dependencies are available in the classpath.
ORABPEL-30099
Error in invoking task validation callbacks.
Error in invoking task validation Java callback com.atc.arcn.callbacks.BaseTaskValidator.performCallbacks for task 204583. The task is associated with workflow default/ARCN!1.0/CNRequestTask.
Make sure that the task validation callback class is specified correctly without any errors. The class name should be fully qualified. Also make sure that the class and its dependencies are available in the classpath.
     at oracle.bpel.services.workflow.task.impl.TaskValidationCallbackInvoker.executeJavaCallback(TaskValidationCallbackInvoker.java:195)
     at oracle.bpel.services.workflow.task.impl.TaskValidationCallbackInvoker.performCallbacks(TaskValidationCallbackInvoker.java:104)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:1190)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:666)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:614)
     at sun.reflect.GeneratedMethodAccessor4268.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy250.initiateTask(Unknown Source)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.initiateTask(TaskServiceBean.java:70)
     at sun.reflect.GeneratedMethodAccessor4267.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy280.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_1035_WLStub.createProcessInstanceTask(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy404.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:50)
     at fuego.papi.utils.ApplicationExecution.beginExecution(ApplicationExecution.java:29)
     at oracle.bpm.workspace.model.common.ExecutionBean.handleExternalInstanceExecution(ExecutionBean.java:171)
     at oracle.bpm.workspace.model.application.ApplicationBean.execute(ApplicationBean.java:148)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:148)
     at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:279)
     at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:145)
     at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:402)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:902)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:313)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.bpel.services.workflow.task.impl.TaskValidationCallbackInvoker.executeJavaCallback(TaskValidationCallbackInvoker.java:191)
     ... 344 more
Caused by: java.lang.NullPointerException
     at com.atc.arcn.util.TaskReminderService.getTaskDetails(TaskReminderService.java:72)
     at com.atc.arcn.util.TaskReminderService.setReminderDuration(TaskReminderService.java:64)
     at com.atc.arcn.util.TaskReminderService.setReminderDuration(TaskReminderService.java:56)
     at com.atc.arcn.callbacks.BaseTaskValidator.processInitiate(BaseTaskValidator.java:96)
     at com.atc.arcn.callbacks.BaseTaskValidator.validateTaskOperation(BaseTaskValidator.java:52)
     ... 349 more
Please help on this issue.It is little bit urgent for us to resolve.
Thanks in advanced.

Thanks for reply Ravi.
The NullPointerException is beacuse of JNDI problem,we resolved that issue.We are able to create the ejb instance but with that instance when we are trying to call ejb method,we are getting the below error in console and the BPM instance is not getting created.
We are able to create the instance of the EJB Bean.But when we try to call the method of EJB Bean(getTaskDetailsByTaskName(taskName)),the BPM instance is not getting created from BPM workspace.If we comment the code for the method of EJB Bean(getTaskDetailsByTaskName(taskName)) able to create the instance from BPM workspace.When we checked the log file this error,it is
Caused by: fuego.papi.exception.CannotCreateInstanceException: Cannot create instance in process 'default/ARCN!1.0*/ARCN'.
     at oracle.bpm.papi.ora.helper.ExceptionHelper.wrapException(ExceptionHelper.java:58)
     at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:56)
     at fuego.papi.utils.ApplicationExecution.beginExecution(ApplicationExecution.java:29)
     at oracle.bpm.workspace.model.common.ExecutionBean.handleExternalInstanceExecution(ExecutionBean.java:171)
     ... 102 more
Caused by: BPM-70204
Exception
exception.70204.type: error
exception.70204.severity: 2
exception.70204.name: Error creating process instance.
exception.70204.description: Error creating instance for target process default/ARCN!1.0*/ARCN.
exception.70204.fix: Verify server log to find the problem cause.
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_1035_WLStub.createProcessInstanceTask(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy407.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:50)
     ... 104 more
Could you please suggest me on this issue.
Thanks,
Narasimha

Similar Messages

  • Jxl -need help to solve error generated while using createWorkbook() method

    I need to copy a template excel file(template will hold the file name) to another new generated excel file (book.xls).
    And I was trying this, -
    FileInputStream fis = new FileInputStream(template);
    jxl.Workbook jwbook = Workbook.getWorkbook(fis);
    Sheet jsheet[] = jwbook.getSheets();
    int sheetNum = jwbook.getNumberOfSheets();
    FileOutputStream fos = new FileOutputStream(pathName + File.separator + "book.xls");
    WritableWorkbook outputWorkbook;
                outputWorkbook = Workbook.createWorkbook(fos, jwbook);error showing :-
    java.lang.NoSuchMethodError: common.Assert.verify(Z)V
         at jxl.biff.XFRecord.<init>(XFRecord.java:356)
         at jxl.write.biff.CellXFRecord.<init>(CellXFRecord.java:50)
         at jxl.write.WritableCellFormat.<init>(WritableCellFormat.java:87)
         at jxl.write.WritableWorkbook.<clinit>(WritableWorkbook.java:55)
         at jxl.Workbook.createWorkbook(Workbook.java:344)
         at jxl.Workbook.createWorkbook(Workbook.java:326)
         at custom.localopal.actions.TestExcel.processAction(TestExcel.java:581)
         at custom.localopal.actions.TestExcel.main(TestExcel.java:1373)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)Here,-
    template is a filename,
    pathname is "c://Test",
    'template' is also in the same path.
    Can any one please help me to identify the problem? What is the reason of the error and how it can be solved?

    It looks like the error is on the below line ;
    java.lang.NullPointerException
      at oracle.apps.ap.oie.audit.server.AuditReportLinesVORowImpl.isPersonalLine(AuditReportLinesVORowImpl.java:449)
    Please check what is the reason for the error.
    I am seeing many issues with VO substitution these days which is because the extended VORowImpl is not calling super for those attribiutes which is overridden in the stanard VORowImpl.
    Please have a read on the below blog and see whether that is applicable to your VO extension.
    Johny's Tips: OAF: Transient Attributes not getting populated in Extended VO
    If not, please attach the standard and the custom VO files
    Cheers
    AJ

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • UnExpected error occured while creating ejb container

    Hey, I am trying to deploy a new bean that I just wrote with a bean that has already been written. My bean is the News bean, the existing bean is the PPSO bean.
    when I deploy, I get the following exception:
    [26/Feb/2004:11:22:42] SEVERE ( 2104): LDR5004: UnExpected error occured while creating ejb container
    java.lang.ClassNotFoundException: com.pragmatics.ppcig.model.ejb.NewsBean_LocalHomeImpl
         at com.iplanet.ias.loader.EJBClassLoader.findClass(EJBClassLoader.java:457)
         at com.iplanet.ias.loader.EJBClassLoader.loadClass(EJBClassLoader.java:585)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
         at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:426)
         at com.sun.ejb.containers.EntityContainer.initializeHome(EntityContainer.java:355)
         at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:230)
         at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
         at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
         at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
         at sun.rmi.transport.Transport$1.run(Transport.java:148)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
         at java.lang.Thread.run(Thread.java:534)
    here are pieces of my deployment descriptor:
    <entity>
              <description>PPSO EJB</description>
              <display-name>PPSO EJB</display-name>
              <ejb-name>PPSO</ejb-name>
              <local-home>com.pragmatics.ppcig.model.ejb.PPSOLocalHome</local-home>
              <local>com.pragmatics.ppcig.model.ejb.PPSOLocal</local>
              <ejb-class>com.pragmatics.ppcig.model.ejb.PPSOBean</ejb-class>
              <persistence-type>Bean</persistence-type>
              <prim-key-class>java.lang.String</prim-key-class>
              <reentrant>False</reentrant>
              <env-entry>
    // - select statements here that don't apply - //
    </entity>
         <entity>
              <description>News EJB</description>
              <display-name>News EJB</display-name>
              <ejb-name>News</ejb-name>
              <local-home>com.pragmatics.ppcig.model.ejb.NewsLocalHome</local-home>
              <local>com.pragmatics.ppcig.model.ejb.NewsLocal</local>
              <ejb-class>com.pragmatics.ppcig.model.ejb.NewsBean</ejb-class>
              <persistence-type>Bean</persistence-type>
              <prim-key-class>java.lang.String</prim-key-class>
              <reentrant>False</reentrant>
              <resource-ref>
                   <res-ref-name>jdbc/ppcigDS</res-ref-name>
                   <res-type>javax.sql.DataSource</res-type>
                   <res-auth>Container</res-auth>
                   <res-sharing-scope>Shareable</res-sharing-scope>
              </resource-ref>
         </entity>
    Any ideas what is causing this error?
    Thanks!

    Hi shanu, thanks for your reply,
    Yes I configured the JMS Objects in my AS before deploying the MDB.
    I set
    - a Queue: RFIDLocatorQueue
    - a connection Factory: RFIDLocatorConnectionFactory
    - and a Physical destination for my logical queue called: RFIDLocatorPhysicalQueue
    The latter was linked to the RFIDLocatorQueue by putting RFIDLocatorPhysicalQueue in the name parameter of the RFIDLocatorQueue.
    Is there maybe something else I forgot to configure ?
    thanks a lot

  • System error message while using maps check in

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

  • Error 7 Windows error 14001 while using iTunes on my windows XP, please help

    Error 7 Windows error 14001 while using iTunes on my windows XP, please help

    Hello Zaza2006,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article outlines the exact error message you provided, and steps that may lead to a potential resolution:
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074
    Thanks,
    Matt M.

  • Getting error while using TRIM method in collections

    Hi Experts,
    While using TRIM method I am getting below error. Am I doing any mistake here ?
    DB : Oracle 11g
    SQL> declare
      2
      3    type emp_tab is table of employees%rowtype index by binary_integer;
      4    l_emp_tab emp_tab;
      5
      6  begin
      7
      8   select * bulk collect into l_emp_tab from employees;
      9   l_emp_tab.trim(5);
    10   dbms_output.put_line(l_emp_tab.count);
    11
    12  end;
    13  /
    l_emp_tab.trim(5);
    ERROR at line 9:
    ORA-06550: line 9, column 2:
    PLS-00306: wrong number or types of arguments in call to 'TRIM'
    ORA-06550: line 9, column 2:
    PL/SQL: Statement ignored
    Thanks in advance for all your help.
    Cheers,
    Suri

    Gerard, and to Unkonwn epxpert ;-)
    Thanks for the reply. I am aware about extend method. But not sure about TRIM. Once again thanks for your help.
    Cheers,
    Suri

  • Error msg while using i pod touch on bose sounddock

    i got an error msg while using my ipod touch on a bose sound dock... it is still working fine it just said error not comatible with i pod touch, was this just a little second glitch, everything is still working fine dock is brand new, is there anything i should be aware of?

    Have you contacted Bose/went to their support site?
    You can try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Error while using  CALL METHOD

    I am getting a error while using CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    The error is class "CL_SSF_XSF_UTILITIES is unknown. How to correct that?? please help I am new to object oriented programming??
    Edited by: priya singh on Nov 18, 2008 2:14 PM

    This is my code.
    REPORT ZSAVE_FUNCTION .
    D A T A D E C L A R A T I O N S *
    DATA: v_bitmap TYPE xstring, "graphic data
    v_file TYPE string, "file name
    v_length TYPE i. "length of binary file
    DATA: BEGIN OF it_bitmaps OCCURS 0,
    object TYPE tdobjectgr, "object
    name TYPE tdobname, "name
    id TYPE tdidgr, "id
    tdbtype TYPE tdbtype, "graphic type
    END OF it_bitmaps.
    DATA: itab TYPE TABLE OF x.
    *class cl_ssf_xsf_utilities definition.
        public section.
      methods : get_bds_graphic_as_bmp
    DATA: L_GRAPHIC_XSTR TYPE XSTRING.
    *method cl_ssf_xsf_utilities
    S E L E C T I O N - S C R E E N *
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS: p_object TYPE tdobjectgr, "object
    p_btype TYPE tdbtype, "graphic type
    p_name TYPE tdobname, "name
    p_id TYPE tdidgr. "id
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS: p_file TYPE rlgrap-filename. "file name
    SELECTION-SCREEN END OF BLOCK b2.
    *A T S E L E C T I O N - S C R E E N O N V A L U E - R E Q U E S T *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
    *-- Creating f4 help for the parameters
    PERFORM get_f4_object_name.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    *-- Getting the current value entered
    PERFORM get_current_value.
    *-- Value Request Functionality For Input File Name
    PERFORM f4_value_request.
    S T A R T O F - S E L E C T I O N *
    START-OF-SELECTION.
    *--Getting the graphic as a BMP file
    PERFORM get_graphic_bmp.
    *--Convert the Xstring format to binary format
    PERFORM convert_to_binary.
    *--Download the graphic
    PERFORM download_graphic.
    *& Form get_current_value
    Get the current file path entered
    FORM get_current_value .
    DATA: BEGIN OF li_dynp_value_tab OCCURS 0.
    INCLUDE STRUCTURE dynpread.
    DATA: END OF li_dynp_value_tab.
    DATA: l_program_name LIKE d020s-prog,
    l_dynpro_number LIKE d020s-dnum.
    l_program_name = sy-cprog.
    l_dynpro_number = sy-dynnr.
    REFRESH li_dynp_value_tab.
    li_dynp_value_tab-fieldname = 'P_FILE'.
    APPEND li_dynp_value_tab.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    dyname = l_program_name
    dynumb = l_dynpro_number
    TABLES
    dynpfields = li_dynp_value_tab
    EXCEPTIONS
    invalid_abapworkarea = 04
    invalid_dynprofield = 08
    invalid_dynproname = 12
    invalid_dynpronummer = 16
    invalid_request = 20
    no_fielddescription = 24
    undefind_error = 28.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    READ TABLE li_dynp_value_tab INDEX 1.
    p_file = li_dynp_value_tab-fieldvalue.
    ENDFORM. " get_current_value
    *& Form f4_value_request
    Provinding the f4 for the given path
    FORM f4_value_request .
    *-- if the file is to be downloaded to presentation server
    CALL FUNCTION '/SAPDMC/LSM_F4_FRONTEND_FILE'
    EXPORTING
    pathname = p_file
    CHANGING
    pathfile = p_file
    EXCEPTIONS
    canceled_by_user = 1
    system_error = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " f4_value_request
    *& Form GET_GRAPHIC_BMP
    Get the graphic as a BMP file
    FORM get_graphic_bmp.
    CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    EXPORTING
    p_object = p_object
    p_name = p_name
    p_id = p_id
    p_btype = p_btype
    RECEIVING
    p_bmp = L_GRAPHIC_XSTR
    EXCEPTIONS
    not_found = 1
    internal_error = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " GET_GRAPHIC_BMP
    *& Form CONVERT_TO_BINARY
    Converting the xstring to binary format
    FORM convert_to_binary .
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
    buffer = v_bitmap
    IMPORTING
    output_length = v_length
    TABLES
    binary_tab = itab.
    ENDFORM. " CONVERT_TO_BINARY
    *& Form DOWNLOAD_GRAPHIC
    Download the graphic
    FORM download_graphic .
    v_file = p_file.
    CONCATENATE p_file '.BMP' INTO v_file.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    bin_filesize = v_length
    filename = v_file
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_write_error = 1
    no_batch = 2
    gui_refuse_filetransfer = 3
    invalid_type = 4
    no_authority = 5
    unknown_error = 6
    header_not_allowed = 7
    separator_not_allowed = 8
    filesize_not_allowed = 9
    header_too_long = 10
    dp_error_create = 11
    dp_error_send = 12
    dp_error_write = 13
    unknown_dp_error = 14
    access_denied = 15
    dp_out_of_memory = 16
    disk_full = 17
    dp_timeout = 18
    file_not_found = 19
    dataprovider_exception = 20
    control_flush_error = 21
    OTHERS = 22.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " DOWNLOAD_GRAPHIC
    *& Form GET_F4_OBJECT_NAME
    Get F4 values for object names
    FORM get_f4_object_name .
    DATA: dynpfld_mapping TYPE STANDARD TABLE OF dselc WITH HEADER LINE,
    return_tab TYPE STANDARD TABLE OF ddshretval WITH HEADER LINE.
    *--Selecting the values to be provided as f4 help
    SELECT tdobject
    tdname
    tdid
    tdbtype
    FROM stxbitmaps
    INTO TABLE it_bitmaps.
    *--To update the values in the remaining fields
    dynpfld_mapping-fldname = 'F0001'.
    dynpfld_mapping-dyfldname = 'P_OBJECT'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0002'.
    dynpfld_mapping-dyfldname = 'P_NAME'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0003'.
    dynpfld_mapping-dyfldname = 'P_ID'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0004'.
    dynpfld_mapping-dyfldname = 'P_BTYPE'.
    APPEND dynpfld_mapping.
    *--Providing f4 help with the selected values
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'TDOBNAME'
    dynpprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = 'P_NAME'
    value_org = 'S'
    TABLES
    value_tab = it_bitmaps
    dynpfld_mapping = dynpfld_mapping
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " GET_F4_OBJECT_NAME

  • Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word

    Hi All,
    I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
    ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
    Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
    Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
    Thanks in Advance,
    Sabu.

    Decalre <TEXTLINE> as type any.

  • Human Task Events

    Hi,
    I have a human task that is initially assigned to a group of users and I need to know when and which user acquires it before submitting the result.
    I thought that this could be done using the onTaskAssign event, but it doesn't work.
    Does anyone have an idea of how I can do it?
    Regards

    Hi,
    I have a human task that is initially assigned to a group of users and I need to know when and which user acquires it before submitting the result.
    I thought that this could be done using the onTaskAssign event, but it doesn't work.
    Does anyone have an idea of how I can do it?
    Regards

  • Workflow Error out while intiatiating forms(Hcm Forms and Process)

    Hi All,
    Our workflows are getting error out when forms are initated from Portal.
    Workflows are getting triggered when it comes to a task(all type of tasks) its getting errored.
    "An exception with the type CX_SY_REF_IS_INITIAL oc curred, but was neither handled locally".
    what i came to know is for users with SAP_ALL access in the R/3 workflow is not getting error.
    without SAP_ALL its happening.
    Please if anything is missing in configuration.
    Thanks,
    Santosh

    clearly correct authorisation is missing for the employees
    and ensure the WF task is set to general in PFTC> Please verify this and you can do a trace too
    as indicated
    you can start via Hrasr_test_process

  • FTP Adapter Errors out while translating

    Hi,
    I am using a FTP adapter to put a text file using a bpel process. But the FTP adapter errors out with the following error:oracle/xml/parser/schema/XMLSchema
    Is there a way to fix this issue?? Please advise.
    Thanks
    PS

    Hi,
    To do the alert configuration as suggested, please go through the information below.
    From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
    If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
    For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
    You'll find more information about trouble shooting the alerting in SAP Note 913858.
    Also just check if this batch program (RSALERTPROC) is running or not.
    The links below on Alert Management (ALM) will be of good help to you:
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
    Meanwhile look at these forum threads also:
    Alerts not getting triggered from Adapter Framework
    Alert  Configs...
    Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
    I hope I have answered your queries. If u want help with anything else please do reply back.
    Regards,
    abhy
    PS: AWARD POINTS FOR HELPFUL ANSWERS.

  • 1142 errors out while downloading image

    I have a 4402 controller just recently upgraded to code 5.2.178. I have a new 1142 out of the box and I am trying to get it up and running. It finds the controller and starts the image download but then stops with the following error:
    capwap_image_proc: problem extracting tar file
    It then tries to reconnect to the controller, it finds it and errors out again.
    Figured I'd ask for some ideas here before I went to TAC.
    Thanks

    Hmm not much to go on here... You know I collect Martin Guitars (to digress here a bit) and at these Bluegrass festivals I like to attend once in a great while they have a bumper sticker that's pretty popular.. it says... "It takes a village to tune a banjo"... at risk of sounding like the village idiot when you have a problem like that... you simply got to take it apart... meaning you can't tune a guitar or banjo without another one (or tuner etc) so you threw an 1142 out there and it's whining.. ok.. I'm thinking this...
    1. Does another 1140 do the same thing (where's the other banjo)
    If no, you have a bad AP. If YES then..
    2. Have you tried to download a new version of controller code and flash the controller again? Maybe during the process the code it pushes to the AP got corrupt? If so that's why the AP rejects it remember the controller holds that image for the AP.
    If you flash it and it still won't talk to the AP.. then what's your network look like.. maybe the image is getting hosed across the network or through something in the network.. break the network down into something easy see if it still fails.. (if it works that's the answer) if it doesn't... time to find another controller.. From the problem description there just isn't enough stuff here to rule out what is broke...
    TAC is a good village to help you tune that Banjo but I don't think you need them for this... ..

  • AMS 4.0 errors out while creating RTF StatusCheckStep error: Package creati

    Hi All,
    OEM: 11g
    Oracle Apps:12.1.3
    O/S: AIX 6.1
    While creating rtf through AMS 4.0, we are getting the error message:
    Error while evaluating expression:[Error evaluating expression: ${FUNC_STATUS_CHECKER(${data.V_BUGNO})} : [StatusCheckStep error: Package creation request failed
    (Status:Completed Error - Initialization Failed).]]
    Could anyone please share the resolution to the above issue faced before!
    Thanks for your time!
    Regards,

    Hi,
    perhaps my help is still useful.
    On the end of the Customization Manager procedure you will find a status checker. The purpose of status checker is to review the individual steps and highlight the job/job step under trouble.
    In your case, one of the sub jobs, here "Package creation request failed" is erroring out. It can be that the AMP plug in is not completely configured, or requires a patch.
    You should run as first the diagnostic for Customization Manager, to see if the expected configuration is in place. You may also drill down to the individual step logs (within job details) to check if there are any further details.
    Regarding rft: usually you use rtf in combination with BI Publisher. If this is the case, please make sure that you have entered the right $Header$ string
    into the properties for your rtf. This is required to inform adpatch to which data source the rtf belongs to.
    Please let me know if this response is helpful for you.
    Kr, Volker

Maybe you are looking for

  • ITunes Media Folder won't switch location from external hard drive

    So for the last few years I've had my iTunes library stored on an external hard drive (a LaCie Quadra), but I'm out of space, so I got a new one (a Lacie Rugged). However, when I go to change the iTunes Media folder location to the new iTunes folder

  • Cost upation of materials

    Client has following requirement. As per the India replenishment process we have to place the order in 8 digit material to Singapore plant& receive the FG in India DC under 8 digit part #. Then India user has to move the stock from 8 digit part # to

  • Service Pack 1 & CU DEC 2014 installation procedure

    Hi together! A short question on the update process for SharePoint 2013. Altogether I'm quite aware of the update process and all the pitfalls that come with it. So, we're on March 2013 PU and planning to install Service Pack 1 AND December 2014 CU i

  • Can I take the CLD at NIWeek if my CLAD expires August 3rd?

    Hello, I took the CLAD at NIWeek 2011 and am now looking to take the CLD. However, my CLAD expires August 3rd, before NIWeek begins. I have two questions: 1. If I register for a CLD at NIWeek, does my CLAD still hold even though it expires the 3rd? 2

  • Hi What are all the transactions that HR Security people will use in HR Sec

    Hi, Can any one give me list of all transactions and tables that HR Security people (like PPOME) will use in HR/ If possible with detail description of the transactions as well. thanks in advance. SSSS