Hyperion Integration server - updating the cube through AIS

Hi All,
we have an existing ASO cube with 12 dimensions and there is a requirement to add another dimension to the same cube. There are currently 16 drill through reports defined against the cube. I have not worked with the AIS earlier but have an overall idea . So if i want to add another dimension through AIS..What are the
things i have to do ..starting from creating/having a dimension table for the new dimension
what are the things i have to take care of?etc
Thanks a lot for your time

Ensure you have a column(s) in your dimension table that can join to the fact table. In EIS open the Model for this particular cube. On the left side find your dimension table and drag it on to the model. Answer yes when it asks if you want to add the table to the current model. Click the "Add Joins Mode" icon then click the fact table object and DRAG and let go on your dimension table. A popup should appear "Create new dimension". Change the name if you wish, then click OK. Another popup appears "Edit join info for...". Choose the columns to join on and click "Add" then "Close". Save the model. Open the EIS outline for this model and assuming you didn't already have it open you'll find your new dimension table on the left. Drag the level-0 (bottom most level) column that you're putting in this cube over to the outline name on the right and let go, or wherever you want to add the dimension and go from there.
If the outline is using User Defined SQL then you'll be prompted "User defined data load SQLs may not be valid anymore. Do you want to delete them? Pressing No will prompt you to edit the SQLs." Choose "No". A "SQL Override" window will appear where you can type in your column name to the Select list (for a hint of what to do look at what it put in the Standard Dataload SQL in grey at the bottom & go from there). Put your new column in the same order in the Select statement that the Standard Dataload SQL has it in.
Then it's probably good to edit each of the drillthrough reports. With the EIS outline open, from the menu choose Edit | Drill-through Reports. Expand each report and decide whether you need to specify a certain intersection level for this new dimension - meaning, at what level do you want to force the users to have to select a value before you'll let them 'see' the drillthrough report. If it doesn't matter for this new dimension then just click OLAP Intersection Levels, Add, then click on your new dimension then the right arrow to add it to the list of intersections and click Close.
Let me know if you need additional assistance.
Good luck,
Karen Smejkal

Similar Messages

  • How to start Integration server with the user XISUPER

    Hi,
    How to start Integration server with the user XISUPER?
    Regards,

    Mahesh,
    In the post installation document, under Creating User XISUPER,
    I see the following,
    1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
    2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
    I am unable to proceed here.Can you please help me to resume the post installation steps ?
    Thanks,

  • HT204266 How to update the app through iTune if its size is too big?

    How to update the app through iTune if its size is too big?

    If your actually wanting to update your iPhone to IOS  6 and you don't have enough memory available, you still need to the action Chrisfromgastonia recommended.  You will find that Movies and TV Shows being moved to your itunes will free up the largest amount of space.  If IOS 6 is your objective, you may be able to re-download the Movies / Videos after the update.

  • Can i load the cube through an customised abap program??

    Hi all,
    I have loaded the ODS using the customised abap pgrm. is it possible to load the CUBES through the abap program.
    If not what is the reasons for not loading it?
    Thanks
    Pooja

    Hi Pooja,
    For me ..
    I'm afraid to upload directly by program to info cube tables .. Because, i don't know what tables it will be taken into account for uploading ..
    But ..
    If the requirement is to upload it by ABAP Program ..
    I make like this ..
    1. I create the ABAP Program to create .csv files. So all uploaded data will be written into .csv files.
    2. I create info-package, that upload data from file. And i define the path to refer to that corresponding .csv files.
    3. Beside ABAP Program is used to write .csv files, i also use it to trigger the info-package.
    So by that techniques, i'm able to upload data by ABAP Program.
    Hopefully it can help you a lot.
    Regards,
    Niel.

  • Does Hyperion Integration Server exist for AS400?

    I need drill through to AS400. I have IBM Data warehouse 7.1 y db2 olap 7.1 on AS400, but sql drill through come with Integration Server.There are any way to install integration server on AS400??

    Yes.. ShowCase is porting EIS 6.5 for the iSeries/AS400. It should be released by late Q3 2002. Check either with IBM or ShowCase (depending on where you got your DB2 7.1) for 8.1 availability

  • Hyperion Integration Server

    Will some one help me in understanding the HIS architecture?1.Firstly, how are the objects in HIS differet from Essbase Objects?2.Is Essbase server required even when you have Essbase integration server.If so, why is that needed when the essbase outline & Data is build & loaded from relational Data source & what role essbase server has if Integration server has its own objects?Is there any documentation on EIS?User

    Hi,Essbase Server is the OLAP Engine and EIS ist a mediator to load data from a relational datasource directly as an outline into the Essbase Database. If you are just up to load the data, you don't really need EIS in my oppinion. Its true benefits lie in drill-through and hybrid OLAP support.Since EIS ist just the "mediating" or loading-tool the objects are not per se in Essbase. You have to load and calculate Essbase in order to bring them into the server.If you have EIS installed there is a full documentation in your program group.Hope this helps.J?rg

  • Error in Updating the Prices through DTW

    Hello Expert,
                         I am getting an error while updating the item prices through DTW.
    I upload all the items in SAP and prices in Price List 01
    Now I create One more Price List with Other name and want to update the Price in this Pricelist for all items through DTW
    but system giving an error "this entry is already present in Table(ODBC-2035) Application Defined or Object Defined ErrorItems"
    SAP 8.8
    PL 5
    Regards
    Atif

    What Neetu suggests is great.  However, you will run into problems if your users have deleted a price list.  Perform the following query as suggested:
    SELECT T0.[ListNum], T0.[ListName] FROM OPLN T0
    Copy this to excel and create a further column called 'RealNumber' or something
    Start numbering cells in this new column from 0 to whatever you need to cover all the lists from the database.
    The number in the 'Real Number' column is the one you should insert into the LineNum field in the prices spreadsheet.
    Hope this helps.  Reply if you need more guidance.
    Regards
    Bob

  • Update the content through Rich Text Editor

    dear all,
    Once i enter the content through the Rich Text Editor data are inside the datebase, but when want to update the things the data are not coming inside the Rich Text Editor, b'caz single quote, double quote,<> symbol is coming,

    Have you consider use Site Studio + Content Presenter?
    http://docs.oracle.com/cd/E17904_01/webcenter.1111/e10149/content_cp.htm
    http://george.maggessy.com/2012/05/inline-editing-in-content-presenter-for_10.html
    []'s

  • Question re how iPlanet Directory Server applies the Look Through Limit.

    I have a question on how iPlanet Directory Server applies the lookthrough limit...
    I am running an LDAP search on a 4.13 directory. The search filter is:
         "(&(rtrdaMaturityDate>=20020128)(rtrdaMaturityDate<=20020130))"
    rtrdaMaturityDate is an int, and indexed with pres,eq,sub
    There are 244680 entries where rtrdamaturityDate>=20020128
    383005 entries where rtrdaMaturityDate<=20020130
    484 entries which satisfy both conditions
    When the query is run as Directory Manager it just hangs (presumably it would complete eventually).
    When run as another user it gives a size limit error. The size limit and lookthrough limit on the directory are both 5000 . As the matching number of entries doesn't exceed the size limit, I think perhaps it is the lookthrough limit causing the problem...
    It looks as if it treats each part of the filter separately, building an candidate list for each, giving an error if both reach the look through limit. i.e. it does not realise that both parts of the filter could be treated together.
    Is this correct ?
    This theory is born out by the fact that if I change the value so the filter would logically return only the highest few values, the search works (i.e. as if the <= filter condition hit LTL, but the >= did not).
    Also, if I add another condition to give "(&(rtrdaIssuerBgNid=4403)(rtrdamaturityDate>=20020128)(rtrdaMaturityDate<=20020130))" then the search eventually correctly returns a single entry. (IssuerBgNid=4403 on its own gives 1004 entries).
    Can I therefore assume that a seach will only work if at least one condition in the filter gives a candidate list with less entries than the look through limit?
    Any advice on how to implement a range search like this would also be much appreciated.
    Thanks,
    Dave.

    The lookthrough limit is reached when the resulting candidate list contains more entries than the limit...
    Lookthrough limit has been implemented specifically to for Range filters (and OR filters) to avoid consuming too many resources.
    For your particular problem, you can increase the lookthrough limit... but it will affect all users and searches.
    Note that iPlanet Directory Server 5.x does provide a per User LookThrough Limit (and other limits as well), therefore you could just increase the lookthrough limit for the specific users performing these searches.
    Regards,
    Ludovic.

  • Two integration server on the same sld group

    hii,
    If I configure two xi integration server to one sld in the same group?
    Is it recommended?
    Will it cause a collision between the two systems?
    tanks in advanced
    Royi

    Hi,
    This can be done as follows,
    1. Create multiple Business System Soruce Gropus. When creating the group for the source, you need to give the related integration server . In your case create the Source Busss System Group A and Group B for intregration server A and B.
    2. Create Business System Target Group Group C for integration server C which is the target integration server.
    3. Assign the source business systems to the correspiodning groups by providing the correct related integration server.
    4. Do the same for the target Business Systems as well.
    5. Now, go to each of the Source Business System and then select the Transport Targets option and map it to the corresponding business system on the target side. This should be done for all Source Business System of Group A and Group B . They should all point to the correct Business System of Group C.
    6. When importing objects you would need to make sure that the Business Systems Being used in the Configuation Scenario all belong to the same Source Business System ., ie. a confgiuration scenario should be such that all business systems used in it belong to either Group A or Group B  and not to both.
    Regards
    Bhavesh

  • Where I can find examples with OLAP DML to update the cube cells?

    Hi,
    Where I can find examples with OLAP DML to update/calculate the cube measure/cells?
    I would like to insert data into the cube by OLAP DML.
    Regards,
    TomB

    Not sure about examples but this is how you should proceed
    1. Limit all your dimension to the leaf level values.
    lmt financialperiod to '200901'
    lmt geography to 'XYZ'
    lmt product to 'LAPTOP'
    2. Limit your measure variable to one measure(this is applicable if you have more than one stored measure in the cube).
    for 10g
    lmt <cube name>prtmeasdim to '<MEASURE NAME>'
    for 11g
    lmt <cube name>measuredim to '<MEASURE NAME>'
    3. Write into the variable.
    for 10g
    <cube name>prttopvar = 100 -- this variable is created for a compressed & partitioned cube. for uncompressed cube the variable name is <cube name>_stored.
    Thanks
    Brijesh

  • My iphone 3g does not work after updating the software through itunes

    Some days ago I made a security copy of my iPhone 3G at iTunes. Today when I conected my iPhone to iTunes I had a message saying I had to update the software of my phone. I accepted and after around 30 minutes of update I got another message saying there had been a problem restarting my phone. The screen of my mobile was showing the iTunes icone and the USB icone and I can't access to the content of it. So I disconnected the mobile from iTunes and connected it again and I got another message saying iTunes has detected a mobile phone in recovering process and it says I have to restaure the iPhone to be able to use it in iTunes. And, by the way, before all this when I connected my phone to iTunes the iTunes recognized the name of my mobile. It doesn't anymore, it just says "iPhone" on the left column.
    My question is: Should I restaure the iPhone? Will I be able to recover the security copy I made some days ago? Where can I access that copy?
    Thank you so much in advance!
    B

    You're welcome.
    Already answered.
    When restoring the iPhone with iTunes, the iPhone is completely erased first folllowed by the current iOS version being re-installed. After iOS is reinstalled, you are prompted to restore from your iPhone's backup, which is the default selection. The other available selection is to restore as a new iPhone or not from the backup.

  • Error while updating the records through a DB link

    Hi ,
    I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
    Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
    Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
    GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
    ALIAS Varchar2 720 - - - - - -
    ACTIVE Varchar2 3 - - - - - -
    REGION Varchar2 300 - - - - -
    1 - 4
    Thanks & Regards,
    Ramu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

  • How to determine the address of the server whence the application through W

    The application is loaded from the server taking place in Intranet networks. How to determine from this application the address of the server with which it it is loaded?
    KSV

    Use could use the javax.jnlp BasicService.getCodeBase(). See http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/examples.html and http://java.sun.com/j2se/1.5.0/docs/guide/javaws/jnlp/javax/jnlp/BasicService.html

  • Problem when updating the notes through synchroniz...

    I use to update my outlook 2003 notes regularly now it won’t updating. I re-install the pc suite once, as soon as I re-installed it worked but only one time.
    My PC Suite version is 7.0.8.2
    Mobile Phone N70 Music Edition.

    Hi,
    This error also comes if you donot mention Business Place and Section code during the transaction.  Please check whether
    you have defined business place and section code and assigned to your company code and also entered them during
    transaction.
    Regards,
    Sadashivan

Maybe you are looking for