Hyperion Planning Drill through to FDM
From Hyperion Planning , when trying to do DrillThrough to FDM a blank Internet explorer page opens. Any setting which needs to be modified to make it work.
you need to import adapter for drill thru capability from FDM. I guess Essbase adapter ES11xG4D.exe is used for both Planning and Essbase
Similar Messages
-
Hyperion Planning Drill through
Hello All,
Please suggest Essbase Studio if works for the below scenario of our environment.
We have a Planning cube and Drill through defined in planning cube using EIS in the planning cube. We want to use Essbase studio 11.2.1. instead of EIS and define drill through on the same planning cube.
I did some research on Essbase studio and did not find a way to just specify drill through on planning cube without building the outline from Studio. Can any one suggest if it is possible to define drill through on planning cube from studio or we have to stay with EIS with the current architecture.
Thanks and appreciate your response.As far as I am aware there is no direct integration so the outline still needs to be built from studio.
Cheers
John
http://john-goodwin.blogspot.com/ -
Drill Through from FDM/ERPI to Source ERP
Per my understanding, when loading data from FDM to a Target EPM system, the drill through from say HFM back to FDM would log on using your credentials via SSO. In other words, I log in as testuser in HFM and drill through, then that testuser id and password must be set up in shared services in the same manner in the epm target system as well as FDM.
Does the same hold true when you drill through from FDM/ERPI back to the Source ERP? In other words, the same ID and password must be set up in HFM, FDM, and say EBS ERP? Or is there a way to set a Global ID for the drill from FDM to the ERP?
Thank you in advanceHello,
In the situation you have described unless the Authentication mechanism and the style of that mechanism for all the environments (in this sitaution Hyperion vs. Oracle EBS) are identical then there is no unified approach. Generally when going from Hyperion into Oracle EBS the EBS landing page is returned prompting you for valid credentials.
In order for this to work in on seemless move you would have to use OID with OSSO.
OID = Oracle Internet Directory
OSSO = Oracle Single Sign On
Thank you, -
Server Error: When clicking on "Drill Through to FDM"
Hi Everyone,
I am getting a server error (404 Resource not found) whenever I click on "Drill through to FDM" from a datagrid cell in HFM. I found that the link it was trying to access was
http://in-ccubicoe3/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
which it would not find as FDM is there on another server.
My setup is as follows:
IN-CCUBICOE3: HFM on IIS
IN-CCUBICOE2: FDM on IIS
I added the document link in FDM as follows: http://in-ccubicoe2/HyperionFDM/AuthorizedPages/LogonPage.aspx?AppName=DEMOAPP
Where am I getting it wrong?
Any suggestions would be great.
Thanks,
SayantanHello,
You are right; I have deployed everything on IIS. This I have been forced to do due to performance reasons as FDM on the same server as HFM was making the response very slow. Is there any settings/registry tweak which can give a workaround for this?
The final solution would obviously be to configure all web apps on the same machine. But I read somewhere what 64 bit HFM web application cannot coexist with FDM as FDM binaries are 32 bit. This makes me think, that there must be something so that enables these two to be configured in a distributed setup?
Thanks for the tips.
~
Sayantan -
Planning drill through with EPMA members
I have a webform and it displays a field 'Asset Desc' which is member of Accounts Dim. This member is only at EPMA and not in Essbase.
Once the Data is entered through webform, I should be able to drill-thru with 'Asset Desc' along with other details.984167 wrote:
I have a webform and it displays a field 'Asset Desc' which is member of Accounts Dim. This member is only at EPMA and not in Essbase.
Once the Data is entered through webform, I should be able to drill-thru with 'Asset Desc' along with other details.
What do you mean by it is not there in Essbase? If it is showing up in webform and you can enter data it'll be there in Essbase.
If you perform a search for Planning drill through you'll get lots of article.
More to life than this...: Planning V11 Drill back
Regards
Celvin
http://www.orahyplabs.com -
Drill through from Planning to FDM 11.1.2 Not working
Hi,
I have FDM with Essbase adapter installed, version 11.1.2.0.0.
And i have FDM application configured to load data from files to essbase. When in Planning form i am clicking 'drill through' icon on cell with loaded data it opens new window with error:
Error: No locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drill through) is properly configured;
2) that FDM POVs have not been retroactively modified or compromised.
In the FDM error log the following record:
ERROR:
Code............................................. 7123
Description...................................... INSERSECTION SQL DEBUG
Procedure........................................ SELECT vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, DataView, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X, SUM(DECODE(ChangeSign, 0, (Amount), 1, (Amount *-1), (Amount))) AS Amt From vDataFact Where (((CatTarget) = N'EXP.011201PDV.BDRS.BUDGET') And ((PeriodTargetM) = N'Jan') And ((YearTarget) = N'FY10') And ((CalcAcctType) > 0) And ((AccountX) = N'EXP.011201') And ((EntityX) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NAAC.3200EN.GD') And ((ICPX IS NULL) or (ICPX = N'') or (upper(ICPX) = N'[ICP NONE]')) And ((upper(UD1X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NA') And ((upper(UD2X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NAAC.3200') And ((upper(UD3X)) = N'EXP.011201PDV.BDR') And ((upper(UD4X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACT') (and so on...)
And we can see that (CatTarget) = N'EXP.011201PDV.BDRS.BUDGET' consist of three joined together elements from three different dimension EXP.011201(account) and PDV.BDR(custom3) and S.BUDGET(scenario).
With other custom dimensions in this select statement - the same error, in front of correct element - string with other joined elements.
Can anybody help me to understand why i have this error in drill through?
FDM error or Oracle RDBMS errors or Planning with Essbase? Something wrong with locale setting may be, with "," or "." delimiter somewhere in the settings?Hi there
Are you using member aliases or names? I had problems with aliases in excel not allowing drill through. not sure if this is fixed in 11.1.2
Are you trying to drill through from a level 0 intersection?
Simon -
Error drill-through from Hyperion to Oracle GL with ERPI
Hi
I am using ERPI to load data from Oracle GL 11.5 to Hyperion PLanning 11.1.2.1.
The data are well loaded. Tje drill-through from Hyperion Planning to FDM is ok.
But whe I try to execute the drill-through from FDM to Oracle eBS, I have the following error message :
Invalid ERPI URL
Return value from erpi web service : java.lang.exception: Invalid DataKey (33487765): No record found.
ERPI Data Key value: 33487765
I have another application with the same source and the same target and the drill-through is ok.
Thanks in advance for your help
FannyAre you modifying the source value in any way before import into FDM? Using an import format in FDM for example?
-
Smartview v11.1.1.3 drill through reports does not work in grids?
Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.
-
FDM Drill through capabilty from Hyperion Planning
Hi,
I have currently some questions regarding the Drill through capability from Hyperion planning.
I successfully loaded a multiperiod excel file into FDM with the interface with this property :
Account Centre Description Legal Entity BU Product Currency Version Application Customer Supplier
A C D UD1 UD2 UD3 UD4 UD5 UD6 Default Supplier V V
ROYALTIES Default_Site SOI - Prime - 4 - 3400/4000 Å - COMPANY_INC 4.PRO.RD0003.PF USD Sales Initial App_1 Customer1 Default Supplier 100 200
When i did the drill back I could see all the info except the description. It is true that description field is not present in Hyperion planning but I thougth I could see it in the drill back.
On top of that I have been to my FDMApplication directory to see the file that is used in the drill back (SAMPLE0748.dat) and open it with notepad. I can see all the information except the description column.
Does anyone know how I can keep in FDM all the informations I want from my first excel file ?
Thank you,
DavidI understand what you explain to me and I agree.
Only one problem is that I don't think in my Hyperion Application I use the account description or Description 2 that would explain the fact I can not use it in the drill back.
So my next question on this topic is, how do I make sure that I can copy attributes values in FDM into Planning.
For your info I check on the workbench and "Account description" & "Description 2" are under my application "Attributes dimensions"
By the way I have an other question wich is not far from the last one.
Regarding the drill back if do an import like this :
CUST1 (Mapping) GROUPCUST1 100
CUST2 (Mapping) GROUPCUST1 200
Will I be able to see in the Drill back CUST1 & CUST2 ?
by the way do you agree with this discussion Dimensions/Fields Displayed on Drill through screen ? Because it is something I wanted to do in FDM...
Thanks again, -
Unable to drill back to the FDM from Hyperion Planning
Hello,
We are using FDM version 11.1.2.2.00 for integration with Oracle E-Business Suite. We have configured FDM to load the data in three cubes in Hyperion Planning i.e. Opex, Capex and Manpower. When we drill back to the source system after loading the data, The drill through to the source system sucessfully runs for opex and capex. But when we click on 'Drill to the Source' from web form in Hyperion planning, it gives below error.
Error: No Locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drillback) is properly configured;
2) that the FDM POVs have not been retroactively modified or compromised.
In FDM error log, the error is as below.
ERROR:
Code............................................. 7123
Description...................................... INSERSECTION SQL DEBUG
Procedure........................................ SELECT vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, DataView, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X, SUM(DECODE(ChangeSign, 0, (Amount), 1, (Amount *-1), (Amount))) AS Amt From vDataFact Where (((CatTarget) = N'ACTUAL') And ((PeriodTargetM) = N'4/1/2013 12:00:00 AM') And ((YearTarget) = N'FY13') And ((CalcAcctType) > 0) And ((AccountX) = N'71104-011-AC') And ((EntityX) = N'00E') And ((ICPX IS NULL) or (ICPX = N'') or (upper(ICPX) = N'[ICP NONE]')) And ((upper(UD1X)) = N'APPROVAL-WIP') And ((UD2X IS NULL) or (UD2X = N'') or (upper(UD2X) = N'[NONE]')) And ((upper(UD3X)) = N'NO CUSTOM DIM1') And ((upper(UD4X)) = N'NO CUSTOM DIM2') And ((upper(UD5X)) = N'00-00000-CC') And ((UD6X IS NULL) or (UD6X = N'') or (upper(UD6X) = N'[NONE]')) And ((UD7X IS NULL) or (UD7X = N'') or (upper(UD7X) = N'[NONE]')) And ((UD8X IS NULL) or (UD8X = N'') or (upper(UD8X) = N'[NONE]')) And ((UD9X IS NULL) or (UD9X = N'') or (upper(UD9X) = N'[NONE]')) And ((upper(UD10X)) = N'REGULAR BUDGET') And ((UD11X IS NULL) or (UD11X = N'') or (upper(UD11X) = N'[NONE]')) And ((UD12X IS NULL) or (UD12X = N'') or (upper(UD12X) = N'[NONE]')) And ((UD13X IS NULL) or (UD13X = N'') or (upper(UD13X) = N'[NONE]')) And ((UD14X IS NULL) or (UD14X = N'') or (upper(UD14X) = N'[NONE]')) And ((UD15X IS NULL) or (UD15X = N'') or (upper(UD15X) = N'[NONE]')) And ((UD16X IS NULL) or (UD16X = N'') or (upper(UD16X) = N'[NONE]')) And ((UD17X IS NULL) or (UD17X = N'') or (upper(UD17X) = N'[NONE]')) And ((UD18X IS NULL) or (UD18X = N'') or (upper(UD18X) = N'[NONE]')) And ((UD19X IS NULL) or (UD19X = N'') or (upper(UD19X) = N'[NONE]')) And ((UD20X IS NULL) or (UD20X = N'') or (upper(UD20X) = N'[NONE]')) ) GROUP BY vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, Dataview, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X ORDER BY PartName
Note: The above error is not able to capture the value for UD6 which is 'Employee' Dimension , UD7 which is 'Jobtitle' Dimension and UD9 which is 'Nationality' Dimension in ERPi.
Can you suggest how these values can be correctly captured while drill through to the source system?
Thanks in advance
Faizan MemonHi,
In that case can you pls confirm the location is correct or not. Try to check the location from where it is drilling back the data. Compare the location with Opex/Capex scenario. It is not an integration issue, something you are missing, otherwise you will face issues with Opex & Capex also.
Soumya -
How to Drill Through from Hyperion Reporting to Oracle - GL by using FDM?
HI
I am new to FDM.
I already Installed and Configured FDM.
I need to provide Drill through functionality on Hyperion Planning Workspace (Hyperion Reports built using Hyperion Financial Reporting Studio and Data Forms) to Oracle Financials(GL) by using FDM.
I think 1st i need to develop Application in FDM Workbench to Push data from Oracle Financials to Hyperion Essbase.
than i need to enable "Drill" on Hyperion Finaical Reports.
Can you please share link , guide or any thing.
Its urgent please.
thanks
Sher
Edited by: Sher Ullah Baig on Sep 13, 2012 3:22 PMThanks
But when i try to log in i m getting error bellow"
Failure of server APACHE bridge: No backend server available for connection: timed out after 10 seconds or idempotent set to OFF."
So do u have any other reference plz
thanks -
Hyperion Planning FDM Integration
I am new to Hyperion Planning and want to integrate with FDM, from documentation i understand it can be done with Essbase. Please help how to integrate Hyperion Planning with FDM
Hi
1. Browse to the outbox\templates folder and open the Budget-12Periods-AllDims template
2. Paste the source data into the template and adjust the periods/location/category to be loaded to and update the upsnamed range to include all of the data
3. Login to the FDM application and choose Activities > Multiload
4. Browse for the source template and click "check-in"
5. Run through the workflow Import/Validate/Export/Consolidate/Check
6. Open EAS and locate the planning application database, right-click and choose Edit/Drill Definition
7. At the end of the URL is a random e character. Remove this character and save the definition
8. Open the planning form in the workspace and drill to FDM, drill is successful.
please check the above and let me know -
Greetings all -
I have not been able to find much documentation about the new FDM drill through feature from HFR. I'm looking for how it works, what is going on in the background, etc. I assume that it is mostly based on a SQL query back to FDM, but is there more to it than that?
I appreciate any information or documentation to be had.
Thank you,
SarahHello Sarah,
The drillthrough from HFR to FDM is seemless. The Hyperion Applications (HFM, Planning, Essbase) all store the information if it came from FDM in a unique way. This unique way is now an identifier so that drillback is available only for the valid cells. Other products that leverage that data (FR, Smartview, Retrieve) will then interpret that data as well.
The drillback actually launches a pre-built FDM WebPage, Logs you in with the credentials provided via the source, and then displays potential records.
Thank you, -
Drill through from Planning to Oracle
Hello,
Quick question: If I load data into Hyperion Planning using ODI, will I be able to drill through to the source which is an Oracle database ? If not, what do I need to be able to do the drill through ?I might run into an issue with that: My infrastructure uses single sign-on (using OAM). FDM does not support single sign-on according to the platform matrix. But it apparently does support it for HFM applications. Single sign-on is also a Connection Option, according to the DBAG for FDM. (which really confuses me: Why does the platform matrix say SSO not supported but then it does work with HFM and it is one of the connection options?
But anyway as far as I know, the above is not the case for planning. Is my understanding correct? If a user provisioned using single sign-on has accesses a data form in the planning application, is there any way he/she will be able to drill through to the source Oracle 10g/11g database? Users also need to push planning and forecasting data from the planning application to the Oracle DB.
Maybe there's a workaround?
Any insight into this will be greatly appreciated as always. -
Is it possible to use FDM ERPI drill-through via Add-in Excel V11
Hi
I am using FDM ERPI 11.1.2.1 to load data from Oracle eBS GL (11.5) to Hyperion Planning 11.1.2.1.
The drill-through from Hyperion Planning to Oracle eBS GL via FDM ERPI is ok through Smartview and the data forms.
Do you know if it is ok through the Add-In Excel V11?
Thanks in advance for your help
FannyYou cannot use the Classic Spreadsheet (Excel) Add-In if that is what you are referring to.
As the other post indicates it will only work via Smart View.
Thank you,
Todd Rebner
Maybe you are looking for
-
Restore Ipod 10G Touchweel with 7.0.2 Itunes and get an error-50 message
I have a problem restoring my 10G iPod firts generation with the new 7.0.2 version of Itunes. I have a error message saying : problem with the iPod Software download . unknow error -50 Check your web settings and an active connexion or try again late
-
Auto emailing of PO's of particular purchasing groups to common mail Id
Hello All, There is a need to have all the PO's created with multiple purchasing groups to be sent to a common mail Id. For Example , there are various purchasing groups like PG1, PG2, PG3,....and so on & the need is to send all the PO's created wit
-
My playlist is my printing right.will it be fixed soon
my playlist for the jewel case wont print correctly will it be fixed soon?When might it be coreected?
-
MacBook Pro, late 2013 will not start up on battery.
Why won't my MacBook Pro (Retina, 13", late 2013) start up on battery, even though it's charged 100%? I can start it up with the power cord, then disconnect the cord and it runs fine and the battery doesn't seem to run down too quickly. I just down
-
Material Z003 Z001 Z001 does not exist
When I post Goods Recipt, I got such error "Material Z003 Z001 Z001 does not exist". The long text of this error message is as below. Material Z003 Z001 Z001 does not exist Message no. M7006 Diagnosis For material Z003, no material master data exists