Hyperion SmartView for office problem

Hi,
I install hyperion hmf smartview for office 9.2.0.3.0.005 whith the admin right, I used it and can remove it from add in in excel 2003 sp3, but recentely we remove the admin right.
So now I can use it but I cant remove it from the add in in exel, that cause some conflict with other add in
Solution ??
We have Windows XP SP3 and Office pro 2003 SP3.
Thanks

Not a pretty solution, but I have had users manually remove the add in files from the Program directory on the hard drive and then save them on their desktop for when they want to use it again.
I think I have read that the newer version has less trouble with excel functions.

Similar Messages

Smartview for Office 11.1.2 and Office 2010 (64 bit)

Hi to all,
does anyone have some experiences if Smart View for Office works with Office 2010 in an 64bit environment? I know this is not yet officially supported, but what could be possible issues?
Regards
Uli

The short answer is no it's not supported -- I put in an enhancement request for this support probably 6 months ago.
Bob, very informative article-- nice to have that kind of materials when you need it.
Uli, you should probably post this thread in the SmartView forum where some of the Oracle SmartView development team read; the issue is a 64-bit add-in is a separate code-line from a 32-bit add-in; this means going forward when/if Oracle begins supporting 64-bit Office they will have a code base for 32-bit and one for 64-bit which is additional over-head across the board.
Regards,
John A. Booth
http://www.metavero.com

I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
http://answers.microsoft.com/en-us/mac

Language Setting for - Hyperion Smart View for Office

Hi,
Here's a scenario I need to find an answer to.
1. We have Essbase system 9 installed on a machine named: USESSSRVR and here the ESSLANG environment variable is set to "English_UnitedStates.US-ASCII@Binary".
2. We build two Unicode cubes, one for Korea Sales called APPKR.SALESCUB & other for Turkey Sales called APPTR.SALESCUB
3. Korean users are sitting in Korea & Turkey users are in Turkey & both these users need to see data in their local languages.
4. Since Essbase Excel Add-In is not compatible with Unicode cubes, we have asked them to use "Hyperion Smart View for Office".
Now question is,
-> Where in this entire system do I need to do Language Settings so that they see their characters correctly?
-> Is there a place in Smart View where you can set languages?
-> Also we have a limitation that we need to have both the applications APPKR & APPTR on the same Essbase server which is in US.
PLEASE HELP.
Thanks.
~Jaymin Darbari.

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

MS Excel 2010 takes long to open with Hyperion Smartview 11

Hi,
the MS Excel 2010 takes about 20 sec to open a blank sheet when is with a user without Internet access. It is automatically open with Internet access. This behaviour started after the installation of Hyperion Smartview.
Can you help?
Ant K.

I've never worked with Hyperion Smart view.
But it sounds like the program configured to access the internet and perform an operation, such as check for updates for that program. Since we know this issue may caused by the Hyperion Smart view. If it is an add-in for office, we can try
to disable it to check if excel can open blank worksheet normally, meanwhile, if you want to use this tool, you can enable it. File->options->add-in

SAP BPC and Hyperion SmartView

Hello, Forum u2013
Encountering an issue when trying to use SAP BPC and Hyperion SmartView at the same time and just curious if anyone else is 1) using both programs at the same time and 2) if so, have you encountered any problems?
Here is the scenario:
I have a SAP template file (EvDRE) that is used in conjunction with Hyperion SmartView. The way it works is that the template would extract the numbers out of Hyperion and then send the base numbers to the SAP system.
In order to do this, however, I have to create the connection to the Hyperion database first, which I do using VBA code.
When I execute this code within a blank workbook, I am able to successfully create the connection to Hyperion with no problems.
When I execute the same code within my SAP template, I receive a MS Excel error (u201CExcel has encountered an error and must close programu2026u201D). This has been a consistent result that Iu2019ve received.
Please note that I am not logged into either SAP or Hyperion when I receive this error (this happens outside both systems). I'm worried that as soon as I log into both programs, the whole thing will crash...
So, just curious if anyone out there is encountering the same issue when trying to use both programs.
Please let me know.
Carlo

My suggestion is to attempt to break it into 2 seperate work flows for testing, using 2 seperate templates. One to pull, then copy the data to the second sheet for submission. I would assume that you would have to be connected to initiat eeither the extraction of sending of data using your added code, so seperating the 2 steps may prove useful.
Hope this helps.

SmartView for Excel

Under Windows 2000 and SmartView for Excel 2003 appear at Hyperion, the options Help an Abount.
But under Vista and SmartView for Excel 2007 doesn't appear these options. Where can I find these?

I'm not sure exactly what you're looking for, but here are two suggestions:
***) Go to the Add-Ins ribbon, then Hyperion, then About.
or
***) Click the MS Office 2007 button (circle with the Windows logo), then Excel Options, then Add-Ins, then Manage.

Hyperion Smartview 9.3.1.5 performance issues

Hi All,
We have recently started using Hyperion Smartview 9.3.1.5 in our office and all users are facing following issues.
1) Whenever a workbook containing smartview form is saved and closed and then opened again then it takes lot of time to refresh.
2) It takes to long to update links in a workbook of a smartview form.
As far as first issue is concerned i investigated the issue and then wrote a excel macro to resolve this issue, which is as follows.
Sub Test ()
Application.Screenupdating = False
HypmenuVRefresh
Application.Screenupdating = True.
But there was no imporvement it was still taking too long to refresh.
and as far as 2nd issue is concerned i unable to find anything for it so far.
Please expedite.

Hi John,
I am using this application in my office and they have recently migrated to 9.3.1.5 version. Can you please suggest me any quick fix or solutions for the above mentioned issues. Please let me know if we can do something for this as i need to spend lot of time in the system for uploading numbers.
Regards,
Abhay

How to delete duplicate attribute in on premise server for office 365 dir sync tool

Hi,
Please anyone help to how to remove duplicate attribute in on premise server for office 365 dir sync tool .
While running the dirsync tool iam getting the below error :
"Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [ProxyAddresses smtp:[email protected],SMTP:[email protected];].
Correct or remove the duplicate values in your local directory. Please refer to http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute value"
Still i am troubleshooting to reslove this problem . I have run the ID Fix tool there i could see some 10 duplicate errors . Next what should i do , please anyone help me to find it
Thanks.....

Hi,
Please anyone help to how to remove duplicate attribute in on premise server for office 365 dir sync tool .
While running the dirsync tool iam getting the below error :
"Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [ProxyAddresses smtp:[email protected],SMTP:[email protected];].
Correct or remove the duplicate values in your local directory. Please refer to http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute value"
Still i am troubleshooting to reslove this problem . I have run the ID Fix tool there i could see some 10 duplicate errors . Next what should i do , please anyone help me to find it
Thanks.....

SAP Business Objects Analysis for Office 1.4 on Microfost Office 64-Bit Version

Hello,
Has anyone installed SAP Business Objects Analysis for Office 1.4 SP6 on Microsoft Office (Excel) 64-Bit Version. I am getting message "The launcher was not able to connect Analysis Add-In. Make sure that Analysis Add-In is not disabled by Office Application".
When I activated the Analysis Add-In, I am getting below Error: "Excel experienced a serious problem with the 'analysis' add-in." and it is forcing to disable the add-in and asking to check for if any update is available. It was working fine on 32-bit Excel version.
Thanks,
Ram

Hi Tammy,
Thanks for the response. It is working fine on 32-bit Office version (with OS 64-bit). I checked the compatibility (OSS 1466118 ) and it supports Microsoft 64-bit office version. Just wanted to see if anyone had successful installation.
Thanks,
Ram

PowerShell for Office 365 is here – here's how to use it

After announcing its intention to release new scripts and commands to better integrate PowerShell with Office 365,Microsoft has followed through.The newly ordained PowerShell for Office 365 features the same command-line interface found in PowerShell 5.0 – and that's because it is the same program.According to The Register, Microsoft has created "ascript libraryto help you do things like add users, control licenses, and stop people from recording Skype meetings."Before you start using it, however, you have to "import the modules corresponding to all the bits of Office 365 you want to administer, including the Microsoft Online Services Sign-in Assistant and the Azure Active Directory Module to handle the important matters of security and authentication."The widespread use of PowerShell and its necessity for sysadmins and network admins...
This topic first appeared in the Spiceworks Community

Hi, almightywiz,
Sorry for the delayed response. I was away from office for one day and did not have access to the files.
And you are right, column 11 is text and column 26 is date (i.e., numeric). And indeed, those visually blank cell in column 11 are not null but have zero length. Java can tell the difference but not by visually inspecting the cells in the spreadsheet.
I also checked the POI API documents, and found that org.apache.poi.ss.usermodel.Cell interface, which has those cell types, is implemented by both HSSFCell and XSSFCell. The question is under what condition the cell type of a cell becomes Cell.CELL_TYPE_BLANK.
While that is not yet clear, I will catch cells missing data in column 11 by checking three things: first check if(cell == null), then if(cell.getCellType() != Cell.CELL_TYPE_STRING), and then if(cell.getStringCellValue().length() == 0). And that solves my problem.
Thank you so much for sharing your experience and solving my problem.
I have another problem that may more serious, at Can I process Excel BIFF5 files, or simply abandon Apache POI? It would be very much appreciated if you had time to look at it.
Best regards,
Newman

After download of Mav, MS Word for Office for Mac 2011 comes up blank.

After download of Mav, MS Word for Office for Mac 2011 comes up blank. Other MS Office apps work fine. When restarting iMac in Safe mode, Word opens OK. Apple support rep says, "Not our problem; it's Microsoft's. There are no Microsoft experts here." But it was Maverick that knocked Word out. (Note: the "not our problem" quote is from the third contact with Apple support. The first two support techs tried to resolve the problem, were very accommodating, and tried their best to solve the issue.)
On another note, I use a Microsoft wireless keyboard, with push-button shortcuts to mail, Safari, etc. The keyboard Command + keystroke shortcuts no longer work, and in the System Preferences file the message tells me it can't access them.
Any suggestions, especially for the former problem, would be appreciated.

DHodges wrote:
Thanks; this last reply came closest to 'solving' the issue. While I selected font sub, it at first had no affect on the document.
I then went back to prefs and set the compatability dropdown from 'Custom' (where it had defaulted) to 'Word 2004-2007', assuming these docs were created from a recent past Windows.
I 'Saved As' a Word for Mac " .docm "
Whoa... the extensions mean something. Your original problem (document shows bold, italic, underline, but tables and other complex formatting are lost) sounds as though the document was being exported as a .RTF, a Rich Text Format file. If you save as a .DOCM, that's a Word Macro Enabled Document. Regular Word 2007, 2008, 2010 and 2011 docs are .DOCX. Regular Word 97 through 2004 docs are .DOC. You need to save that document as a .DOCX or a .DOC or you're gonna have problems later.
- and the documents appear normal (though I had to switch one to 'Portrait' as it for some reason wanted to display in landsacpe.
Normally you'd have to select page orientation.
So, poor testing on my part. I have no idea which of the above steps fixed it but I'm guessing the 'Save As' to my version of Word.
If so, it would appear the 'Compatability' feature was not working at least on these two documents.
Word's compatibility feature is supposed to ensure that a document you produce is compatible with the target version of Word. If you turn the compatibility stuff on then you will be warned if you are using Word 2007 through 2011 and you use a feature that earlier versions of Word do not have. Microsoft shipped a translator which works with Office 2003 and 2004 and which allows Word 2003 or 2004 to read Word 2007, 2008, 2010, or 2011 documents (.DOCX) and to save them as Word 97 through 2004 documents (.DOC) _as long as they don't have any incompatible features_. Word's compatibility features doesn't do much for .RTFs or for .DOCMs.

Critical update won't load for office 2011 released 2.10.15

A critical update appears for Office 2011 released 2.10.2015 14.4.8 113.6 MB
This update fixes critical issues.
As soon as it goes through all the install process, it says it was successful, Then it immediatlely shows up as a critical update needed AGAIN.
I can't figure why it will load.
Thanks

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Z10 and Q10 frequently asking for Office 365 password

I have an AT&T Z10, and a client has a Verizon Z10 and 2 Verizon Q10s. Both of us use Office 365 as our email service. With the lack of BB10 support in BBCS (Blackberry Cloud Service for Office 365) I was forced to set up all these devices on ActiveSync. For the most part this is working OK. However each user has either been prompted for the Office 365 password multiple times in a day, or they don't notice the prompt and the ActiveSync account is marked as invalid on the Accounts list in setup.
I have looked everywhere within the Office 365 administration console and can find nothing related to asking for the password frequently. I did find settings to control if the device has a password, but nothing related to the device prompting for the Exchange password.
I am only annoyed by it, but my client is getting quite frustrated and is questioning whether they will bother upgrading their other 20 Blackberry devices to BB10s, or look at other devices. Either some direction to solve this ActiveSync problem, or a likely date for BBCS to be BES10 would be helpful.

My user with a Q10 has had this same issue with our Office 365 account. Seems to work fine for a few days then randomly stops getting new email. Go in and reenter his Office 365 password and all is well again... for a few days when it seems to lose it again.
We have about 15 iPhone's of various flavor and 3 Android HTC One's with no issues on O365.

LabView database connectivity toolkit 1.0.1 compatibility with MS-ACCESS 2010 / Labview report generation toolkit for Office 1.1.3 compatibility with Office 2010

In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 databases using the LabView database connectivity toolkit 1.0.1. Office 2003 is also loaded on these test platforms with all test reports generated using the LabView report generation toolkit for Office 1.1.3.
I have not gotten my hands on a copy of Office 2010 yet to see if there will be any compatibility issues. Does anyone have any experience in this area?

The MS-Access part is fairly well isolated through the ADO interface LabVIEW uses. The only possible problems there IMHO are difficulties with possible Acess compatibilities itself such as an example, SQL statement you may have invoked directly through the ADO interface. Maybe you did use a depreciated command back then that has since been removed. As long as the only thing you do are simple INSERT and SELECT statements only, I would expect it to just keep working.
The Report Generation interface is a different beast. Microsoft manages to change the Automation interface with every version of office in a way that strongly binding applications like LabVIEW break on. There is no good way around that except not changing those methods, but that is a cause that has been lost already. You will certainly have to verify the version dependant Report Generation API VIs to still work with Office 2010 and most likely you will have to make some changes to those VIs to make them work again with the modified ActiveX interface of Office 2010. Note, that I have no experience with porting report generation to Office 2010 but I have had some headaches from porting that between Office 97, 2000, 2003, and 2007.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Hyperion SmartView for office problem

Similar Messages

Maybe you are looking for