Hyperlink to a file causes FTP error?
If I insert a hyperlink to a file that is located on my local hard drive, the site will not publish. iWeb says 'error communicating with the FTP server', and contact your service provider, etc.
If I remove the link, everything publishes fine. I am assuming the file can be anywhere, and iWeb will create a copy and move it (FTP) to the web server. Or do I need to manually put the file on the FTP site myself? If so, how do I refer to it in the iWeb designer?
If you are using the iWeb FTP to upload your site files they will be inside a folder as described here...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
The PDF you upload needs to be outside of this folder or iWeb will overwrite it when you next publish changes. Create a folder and name it something like PDF-Downloads. Put the .pdf file inside and upload it to the root folder using an FTP app. The link will be...
http://www.domain-name.com/PDF-Downloads/file-name.pdf
If you want the file to download when the link is clicked, create a Windows compatible zip file as described on this page...
http://www.iwebformusicians.com/iWeb/PDFs.html
Similar Messages
-
Receiver File Adapter: FTPS Error
On sending a text file to a trading partner the log in the communication channel shows the following:
Connecting to FTP server - success
Write to FTP server - success
Transfer: "TXT" mode - success
Exception caught by adapter framework:connection timed out - Error
The FTP connection Parameters have:
Data connection = Passive
Connection security = FTPS (FTP using SSL/TLS)
Command order AUTH TLS, USER, PASS, PBSZ, PROT
Use of X509 cert for Client Authentication is checked
Keystore = service_ssl
x.509 Cert and private key = *******.crt
When I look in the NWA logs for default trace I see several messages with the text "Rolling back transaction for message..." plus a FILE_ERR_211
What is a FILE_ERR_211?
Thanks
Markhi mark,
To configure a timeout for the FTP connection, please enable the "Advanced Mode" for the respective FTP communication channel in the Integration Directory and add an entry "ftp.timeout"=timeoutSecs
(without any quotation marks) to the "Additional Parameters" section, where timeoutSecs is the desired FTP timeout in seconds.
regards
kummari -
Hi,
I have a Sender File Adapter using FTP which polls a server every 60 seconds looking for a file. Intermittently the adapter will connect and pick up the waiting file. However, more often than not it gives an error:
An error occurred while connecting to the FTP server 'xx.xx.xx.xxx:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 426 Unexpected reply codeConnection closed; transfer aborted.'. For details, contact your FTP server vendor.
The connect mode is Permanently and the transfer mode is Binary.
Any ideas ?
PaulC.Monica,
Can you explain the difference between ACTIVE and PASSIVE and why changing to ACTIVE may get rid of this issue ? Have looked at the help.sap.com and it doesn't give too much detail on these settings.
Thanks
PaulC. -
SENDER FILE ADAPTER (FTP) ERROR
Hi,
Iam getting the following error in sender file adapter:
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 *** ERROR *** NO BATCHES FOR TRANSMISSION
Could anyone help me in this.
Thanks &Regards,
KiranHi Kiran,
This problem is not related to PI but rather related to FTP server settings.
Try changing the name of the file in your adapter settings to a string without any dots and ".
Try this and let me know if its successful.
Regards,
Divya -
File Adapter FTPS: Error - iaik.security.ssl.SSLException
I'm trying to use FTPS to communicate from XI ( SP 15 ) . FTPS system Admin provided CA Certificate and we installed same in key Storage as trusted CAs.
However when I try to send file It was throwing message " Error: Message processing failed: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter " In the Adapter Monitoring .
However same Certificates installed on recent versions of XI ( PI 7.0) works just fine.
Any ideas will be appreciated.Hi S T,
Check these..
Details for 'Is Web service security available?'
HTTPS Error
All the best!
cheers,
Prashanth
P.S Please mark helpful answers -
File Adapter FTP Error : 501
Hi All,
I am getting following error in the communication channel for File Adapter.
'com.sap.aii.adapter.file.ftp.FTPEx: 501 IP Address for data destination doesn't match client's.'
Communication channel details are as follows -
FTP protocol is used with Port 21.
Data connection - Active
File type : Binary.
The same interface is working fine in Development, Quality and Pre-Prod environments.
This issue is coming only for Production FTP server.
From the error text, it appears as a network issue.
Please to let me know if anyone has came across such issue earlier, and what the the possible reasons - solutions to resolve this.
Thanks a lot.
Regards,
Minal>
Minal Vaidya wrote:
> Hi All,
>
> I am getting following error in the communication channel for File Adapter.
>
> 'com.sap.aii.adapter.file.ftp.FTPEx: 501 IP Address for data destination doesn't match client's.'
>
> Communication channel details are as follows -
> FTP protocol is used with Port 21.
> Data connection - Active
> File type : Binary.
>
> The same interface is working fine in Development, Quality and Pre-Prod environments.
> This issue is coming only for Production FTP server.
>
> From the error text, it appears as a network issue.
> Please to let me know if anyone has came across such issue earlier, and what the the possible reasons - solutions to resolve this.
>
> Thanks a lot.
>
> Regards,
> Minal
this seems to be something to do with your firewall... you can have your network team involved so that the can work a solution.
a good read: http://lists.opensuse.org/opensuse-security/1999-11/msg00099.html -
Deleted swc files causing an error
Hi,
I have built an AIR app using FB3 and have been playing
around with styling it up. At first I was using flash cs4 to build
skins and import them as swc files which worked fine but then I
realised that I could get away with just using style sheets and so
I deleted the swc files and all references to them that I could
see. Now when I try to run the project I get an error saying that
flex was unable to open the swc.
I can't find where the error originates from or why it should
still be looking for the file at all. I have tried cleaning the
project and restarting FB but I cant clear this error.
Anyone have any advice on this one?
Cheers all"invisibleBlade" <[email protected]> wrote
in message
news:gpo2pd$n50$[email protected]..
> Hi,
> I have built an AIR app using FB3 and have been playing
around with
> styling it
> up. At first I was using flash cs4 to build skins and
import them as swc
> files
> which worked fine but then I realised that I could get
away with just
> using
> style sheets and so I deleted the swc files and all
references to them
> that I
> could see. Now when I try to run the project I get an
error saying that
> flex
> was unable to open the swc.
> I can't find where the error originates from or why it
should still be
> looking
> for the file at all. I have tried cleaning the project
and restarting FB
> but I
> cant clear this error.
> Anyone have any advice on this one?
Try cleaning your project. -
XTRA - Audible file causes "Playback Error" or wo
I am using the player in Car Mode so it shuts down automatically when I turn off the car. Last week I had played through about 4 hours into the 8 hour Audible file. I got in my car yesterday and it wouldn't play the file. It showed the time as --:--:-- and the HD stopped spinning.
I tried going forward and backward and neither worked.
I tried switching to another track, but it would not stop attempting to play the Audible file.
Using the recovery menu, I selected "Clean Up". This allowed me to play other files, including other Audible files, but it would still hang when attempting to play that specific file.
Today, I removed that file from my Zen and re-transferred it using the Audible Manager.
Now when I attempt to play that file it plays the "This is Audible" part, about 2 seconds, and then shows the "Playback Error" message.
I tried skipping forward using the Go To Section function and it hard crashed.
Is there something I can do to be able to play this file?
Is this an indication that something is wrong with my Xtra?
Thanks,
AltairAltair wrote:
I am using the player in Car Mode so it shuts down automatically when I turn off the car. Last week I had played through about 4 hours into the 8 hour Audible file. I got in my car yesterday and it wouldn't play the file. It showed the time as --:--:-- and the HD stopped spinning.
I tried going forward and backward and neither worked.
I tried switching to another track, but it would not stop attempting to play the Audible file.
Using the recovery menu, I selected "Clean Up". This allowed me to play other files, including other Audible files, but it would still hang when attempting to play that specific file.
Today, I removed that file from my Zen and re-transferred it using the Audible Manager.
Now when I attempt to play that file it plays the "This is Audible" part, about 2 seconds, and then shows the "Playback Error" message.
I tried skipping forward using the Go To Section function and it hard crashed.
Is there something I can do to be able to play this file?
Is this an indication that something is wrong with my Xtra?
Thanks,
Altair
Does it happen only to that particular file only? If it does, then it's most likely a problem with your file rather than the player. -
(auto-)syncing is stopped when just one file causes an error message
I tried auto-sync an manual sync, but whenever there's a file that can't be tranfered to my ipod classic, the whole process is interupted. that's really annoying because I can't monitor the whole process. is there any chance to skip files that won't be transferred to the ipod?
I am having a similar problem. Dead old drive - trying to sync to the new computer, but don't want to put it on the hard drive, but rather on an external drive. It looks like the files are there, but they don't show up in the library. Any help for that situation? I've been battling this for about 3 months and haven't been able to add anything new to my iPod since then. Help!
-
File adapter causes FTP process stop result 0 byte file.
Has anyone ever heard that FTP adapter can cause FTP process to stop and end up with 0 byte file transferred?
We use the normal ftp script to ftp file from external file server place file in XI inbound folder so that file adapter can pick them up from that folder.
We have encounter a few 0 byte FTPed file in our system. One suspecting is the network between XI server and file server might get some interruption. With out just blaming on the network. We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??
We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??
Best rgds,
ThidaHi,
><i>We would like to know if there is any possibility that it is also causes by our file adapter? Says, it try to read the file that is not yet complete transferring make FTP give up transferring??</i>
have not seen the file adapter causing any such problems. So, it looks like a network issue.
><i>We would like to know if FTP process is transferring the file over and file adapter try to read, what will happen? Will it read file with incomplete content and ftp still go on? Or will it stop reading and return back error as the file could not be open? Or it will force FTP process to let go the file??</i>
Am not exactly sure, but when a file is being created and the file adapter tries to read such a file, the file would be READ and WRITE Locked and so File adapter should not be able to read such a file until the creation of the file is complete.
Also, take a look at the note : <b>821267</b> , question 31 for how file adapter processes empty file.
Regards,
Bhavesh -
Hi,
Iam using a J2se file adapter for connecting to a FTP and picking the files.The following error has been shown and could't process the files-
13:09:40 (4029): Process 1 file(s):
13:09:40 : example.txt
13:09:58 (4030): Start processing "BIN" file "example.txt" size 69426 in "EO mode
13:09:58 (4032): Sending binary message "c7e7c0e2-7023-3800-88e2-2edf80d48360" type "application/xml" to Integration Engine... (message size: 69426 bytes, URL: " http://*************** "
13:09:59 (4076): ERROR: Finished sending to Integration Engine with error "java.net.SocketException: Software caused connection abort: socket write error". Skip confirmation and quit this loop
13:09:59 (4077): Retry mode - wait 7200 sec, 0 msec interval before retry
I tried using j2ee file adapter instead, but the channel has shown the FTP error:530.
we could login into FTP through command promt and have correct login credentials.
There is no firewall blocking.
does anyone have idea on this error? plz reply me ASAP.
Thanks..Hi
Check Read / write / delete permision for the folder in the FTP Server
Paste u r Connection parameters in the FTP
Reagrds
Srinivas -
Connection refused Error while writing file to FTP server.
Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location. -
Error while reading files through FTP Adapter
Hi,
I am using FTP Adpater to read files and archive in local folders.
But i got the following errors when i deployed the process:
<2008-12-18 13:48:31,140> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Connection Created
<2008-12-18 13:48:31,390> <ERROR> <default.collaxa.cube.activation> <File Adapte
r::Inbound> Unable to get Binary file '/MySharedFolders/abc/AAAA_TT_
Trrrrplan Bireeee Baaaa? ??ketmmllri Ltd.?ti._4673651.pdf'; FTP command RETR returned unexpe
cted reply code : 550
<2008-12-18 13:48:44,156> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Managed Connection Created
<2008-12-18 13:48:44,156> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Processer thread calling onFatalError with exception Error getting bi
nary file from FTP Server.
Unable to get binary file from server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
<2008-12-18 13:48:44,156> <FATAL> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Get_ptt::Get(opaque)]Resource Adapter requested Process shutdow
n!
Please help me out on this issue.
Thanks,
SynthiaHi James,
We have upgraded to 10.1.3.4. but still we could not read the file. the problem is, it could not read the file names contains with UTF-8 characters.
error is below:
<2009-12-01 15:43:33,109> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Managed Connection Created
<2009-12-01 15:43:33,109> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Connection Created
<2009-12-01 15:43:38,406> <ERROR> <default.collaxa.cube.activation> <FTP Adapter
::Inbound> Unable to get Binary file '/MySharedFolders/Invoice History/EMEA_TR_B
imta?-Bo?aziτi Peysaz ?n?aat Mⁿ?avirlik Teknik Hizmetler A?aτ Sanayi ve Ticaret
Anonim ?irketi_44596501.pdf'; FTP command RETR returned unexpected reply code :
*550*
<2009-12-01 15:43:51,156> <INFO> <default.collaxa.cube.activation> <FTP Adapter:
:Inbound> Processer thread calling onFatalError with exception Error getting bin
ary file from FTP Server.
Unable to get binary file from server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
<2009-12-01 15:43:51,156> <FATAL> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Get_ptt::Get(opaque)]*Resource Adapter requested Process shutdow*
n!
Thanks you. -
Error while downloading PDF file from FTP Server
Hi Friends,
I have sent a PDF file with data to FTP , Then i want to check that uploaded pdf file , whether that is correct or not?
for that , i have downloaded that file from FTP and i am trying to open the file . but it is giving this problem .
"There was an error opening the document . The file is damaged and could not be repaired."
will you suggest me regarding this.
thanks in advance.
balaji.T.CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spoolno
src_spoolid = wa_file-rqident
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
OTF_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
because of this one PDF internal table is obtained.
OPEN DATASET L_FILENAME FOR OUTPUT in text mode MESSAGE MSG.
LOOP AT pdf.
CONCATENATE pdf-tdformat "Material group
pdf-TDLINE "Basic Material
INTO ITEXT-TLINE ..
APPEND ITEXT.
TRANSFER ITEXT TO L_FILENAME.
ENDLOOP. -
Pdf file causing archive utility to throw error
I have a couple of pdf files which cannot be compressed without an error. Supposing that the nasty file is called foo.pdf.
. In the Finder, right click on foo.pdf
. Select Compress "foo.pdf"
A file called foo.pdf.zip is created but an error pops up An error occurred while compressing a file. Strangely enough, the error window has a titlebar called "Copy".
When looking in the Console, there is always an error from mdworker listed:
2/24/2009 10:23:37 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20524] zip importer countered an error (2) scanning "/Path/to/foo.pdf.zip"
This same file also always errors out when trying to use -ditto- in a Terminal window. (See this minithread: http://discussions.apple.com/thread.jspa?threadID=1724912 )
FWIW, attempting to open foo.pdf.zip causes the Archive Utility to throw the error
Unable to unarchive "foo.pdf.zip" into "Wherever".
Error 1 - Operation not permitted
Does anyone have any idea what could be causing the problem?
BillNothing's wrong with it except that it doesn't support encrypted .zip files. You'll just have to use third-party software, or a Terminal command, to unzip those.
Maybe you are looking for
-
My I POD is at least 6 years old - functions well - 60 GB version I only use it for music and PodCASTS which uses little room say 5 GB However, I have a yellow " OTHER " band which is impossible to me as I have not recorded anything else, However it
-
I dont know if I should set up my IPod as new or to restore it from my old one
So i've had it my IPod Touch for six months and never connected it to my computer until now. But it is asking if I want to set it up as new or to restore it from the last time I synced my old Ipod (which was two years ago). I dont want to have my old
-
UTL_MAIL --- ORA-30678: too many open connections
Hello, I have a pl/sql package that sends out emails using UTL_MAIL pkg pointing to an Exchange server, an APEX app calls this pkg.. This package used to work fine for months but I recently noticed that some emails are not being sent as expected. The
-
Anyone else's macbook case burst??
I have had my white macbook for a couple of years. Not long after I got it a bit of the casing came away and I never thought anything of it. Then I noticed a split right along the whole computer. Also another part of the casing is now hanging off.
-
I am trying to download Final Cut Pro, but it keeps telling me there is not enough space on my hard drive even though there is. Help?