I am afraid for updating the os of my iphone4s to 7.0.3. right now i m on 7.0.2 need advice do i update or not ?????

I am afraid for updating the os of my iphone4s to 7.0.3. right now i m on 7.0.2 need advice do i update or not ?????

Why would you not update? iOS 7.0.3 is mostly bug fixes. Read here:
http://support.apple.com/kb/DL1691

Similar Messages

  • For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    Hi Bharathi,
    If required no ranges are not there which you want to add then will not be problem and you can extend the 23999999 to your next limit like 39999999 check the overlapping.
    Check extended no rage are present in the system and then system would not except because of overlapping.
    Check and tell.
    Regards,
    Sankarsan

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • HT201209 The computer insnt letting me update the new itunes. So i deleted it all and now it ses when i try to download a new one that it cant delet the old itunes ... what could i do

    The computer insnt letting me update the new itunes. So i deleted it all and now it ses when i try to download a new one that it cant delet the old itunes ... what could i do

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I just bought a new iPad 2. It says I need to update the software but it keeps failing., I just bought a new iPad 2. It says I need to update the software but it keeps failing.

    I just bought a new iPad 2. It says I need to update the software but it keeps failing., I just bought a new iPad 2. It says I need to update the software but it keeps failing.

    Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
    Restore iPad
    If you can't restore this way, you will need recovery mode.
    Unable to Restore

  • I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it.

    I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it. How do I fix this?

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • Please prepare asap an extension for installing the new Jquery Mobile 1.2.0 release, which is now th

    Please prepare asap an extension for installing the new Jquery Mobile 1.2.0 release, which is now the latest stable version, please. Many thanks, Adolf

    Krrish,
    So do you mean that the BPEL respository was already there when you did the install? If yes, then that explains the mismatch error. You should always clean up the old references if doing a reinstall. Drop the user and schemas related to PM and do a reinstall.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

    I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

    Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • When I have made a movie in Imovie and I want to transfer it to Theater I get the following comments: Imovie is updating your Theater, You can't add or remove movies right now. Please try again in a moment. I have reinstalled,  Imovie to no avail

    when I have made a movie in Imovie and I want to transfer it to Theater I get the following comments: "Imovie is updating your Theater, You can't add or remove movies right now. Please try again in a moment". I have uninstalled and reinstalled Imovie to no avail, cleaned with "Onyx" etc.

    This simply means it is set to Automatically update and you should not have to do anything with it.
    When you put new music in iTunes , it will automatically go on the iPod next time you connect it.
    This is the default to make it very simple and very easy to use.
    If you want to do it all yourself, iTunes prefs -> iPod.
    Set to Manually manage songs and playlists.
    You have to drag songs to the iPod and delete them from the iPod.

  • I updated the newest version of itunes on our 3rd generation itouch now i get an error message itunes could not connect to this ipod because an unknown error occurred (0XE8000001) what to do?

    i updated the newest version of itunes on our 3rd gen itouch, now we get the message itunes couldnot connect to this ipod because an unknown error occurred (0XE8000001) - what do we do?

    Try this:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • TS1398 i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

    i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

    i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

  • Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Hello trailblazer59,
    The article linked below provides some useful troubleshooting steps that can help get FaceTime working on your iPhone.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

  • How do I delete a photo from my desktop which keeps showing the following info. every time I try to move it to the trash?:  "DSC_0073.JPG" can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the

    I dragged a copy of a photo onto my desktop from iPhoto, and it seems to be in some state of process/activity (vs. just being a copy of a photo on my desktop).  I tried to delete/move to trash the photo, and I keep getting the following message:  “DSC_0073.JPG” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
    How do I delete this photo from my desktop?
    Thanks!

    I ended up shutting down my system, and when I started it back up, I was able to drag the photo to the trash and delete it (I did get a message warning that my deleting the photo might negatively affect the application that was "using" it, but I deleted it anyway...it worked...and I'm hoping I didn't adversely affect another application!).
    Thanks so much for your help!

  • Need advice & answers about updating DV7 Processor

    I've had an HP Pavilion dv7t Intel Core 2 Duo T6400 2.0GHz 4GB 320GB 17.3" for a little over a year. (I have no idea what the processor # is) Recently the fan started getting louder so I took it in to be cleaned b/c my hands are paralyzed and I can't work on the unit myself. The tech got the fan running smooth again w/ graphite powder. Right after that he said the laptop wouldn't stay running for longer than 5 mins before shutting down. As of right now he says the CPU is fried. I asked if he could pull it and test it and then he informed me that the CPU was soldered to the motherboard. (it was running fine until it was taken to be cleaned except for loud fan noise)
    Ok, so if the processor has gone out. Whats a good replacement/upgrade if possible for this system and how much will a CPU and motherboard set me back?
    Any advice, tip or suggestions would be greatly appreciated.
    -Thanks

    The processor in not soldered for your model, you should consider other technician.
    Take a look dv7 Maintenance and Service Guide
    I'm guessing he did something wrong when cleaning and adding new thermal paste.
    CPU is the most rare part to fail.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

    After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

    Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
    Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.

Maybe you are looking for

  • Windows 8.1 Desktop won't load.

    I have a toshiba and today it froze so badly that I had to hard reset it. Now, when I log in with my pin, I press enter and the pin box where I entered my pin dissappears and my pc does nothing. If I want to press any other button, it takes 5 minutes

  • Using ITunes to import from analog

    Since buying an Apple laptop for my wife, I've been hooked to iTunes. In the "main" Windows XP PC, I downloaded iTunes. Other than some problems with remote Airport station (only from Windows), the program has exceeded my expectation. (My next main c

  • Alert through mail

    Hi, I am getting alerts in the alert inbox(RWB). But the requirement is to send the alert to the mail(Outlook). I did the required configurations in SU01 and SOST but still I am not getting any alert in my Outlook inbox. Please provide me the steps t

  • Scan a barcode and fiil out text box

    Hi there, I need to read a bar code and populate a text box, I have a pda to do this but the problems is How can I activate the submit button automatic.

  • Aperture and Bridge

    I have avoided using Bridge (much to my annoyance) as I cannot access the folders within my Aperture library (which are in the Pictures folder). Can someone take pity on this photographer here, whose workflow has become rather cumbersome of late.....