I am getting blank screen with the symbol for files and a question mark on top of it on my imac. How do i resolve this?
When I start up my iMac, I get this blank screen with a flashing ? (question mar). how do I resolve this?
abhayakumar wrote:
Here's what I did. I pressed options moment I powered on the iMAC and it started up.
The blinking folder + ? means that the Mac can't find your startup disk. Holding option down after the chime means you're forcing the Mac to look for any version of OS X on any connected disk. If it then finds your HD and starts up, one of the following needs to be done :
1. Verify and if necessary Repair your HD using Disk Utility
2. Repair Permissions using Disk Utility
3. If there is a slowly developing issue with the HD it may need to be replaced
4. If none of the above, it could be the logic board (usually capacitors)
Similar Messages
-
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
-
Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
thank youIf a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Mail stopped working. Now get blank screen with icons (delete, file, forward, etc) at top. Then goes blank. iPad 2 purchase 12/11
Try to reset your ipad and/or force quit the mail app
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
Force close an app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode. -
When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
What I have tried:
Uninstalled iTunes,
Removed firewall and protection.
Re-installed iTunes 64bit (still get the same issue)
Restarted firewall, added apple.com etc.
I have created a new user profile to no vail.
Still the same issue. I can access using my iPodI am having the same problem ever since I upgraded. Have received four emails from Apple support on the
issue and nothing has worked. Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
me to sync my Iphone with the ios 5 upgrade. Went back to 10.5 and sometimes get exactly what you do when
I try an access the store. It looks like something is clearly missing. Have done just about everything I have seen
on threads but nothing works. Really need help. -
i brought a used ibook 9.2 and im tryin 2 get it 2 work but it just cumin on with a blank screen with the time showin and after a couple of mins it ask me for a user name and password how do i make it like new
couple of mins it ask me for a user name and password
Replacement System Install & Restore CD/DVDs are available from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
You will need those discs to change the admin user name and password. -
YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.You will find that using the YouTube app will provide a better viewing experience for YouTube videos.
-
I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.
OK, I think I fixed it.
After trying to restore with an old backup from the phone (it estimated it would take 4 hours) I cancelled and went through the setup menus again, but set it up as a new phone. It then appeared in iTunes and I restored it from the computer, not the phone. It appears to be working, it's syncing my old apps right now.
Summary:
1. Reset settings on phone (hopefully you backed up fairly recently)
2. Set up as NEW iPhone in setup menu on phone
3. Restore from iTunes on computer when it recognizes the phone
4. Cross fingers -
My apple TV automatically updated and now that the update is done, I get a screen with the back of the Apple TV showing a plug coming out of the HDMI spot pointing toward a music sign. How do I get the menu screen back?
The update didn't apply correctly. You need to grab a micro usb cable and connect to iTunes for restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I have a blank screen with the spining circle. doesn't respond to anything
i have a i touch runing newest software 10.5? i have a blank screen with the spining circle. doesn't respond to anything, ie...holding the on off switch
or the home button for 10 secondsHi,
If the site has been bookmarked, you can try to check if '''Load this bookmark in the sidebar''' has been enabled (tick) in the [https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks?s=bookmarks&r=0&e=sph&as=s Bookmarks Library]: '''Bookmarks''' > '''Show All Bookmarks''', search for the site on the top right search box, select the site and click on the arrow beside '''More''' on the bottom. -
I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank youSergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.
-
Why do I have a black screen with the icon spinning round and won't open?
why do I have a black screen with the icon spinning round and won't open my photos?
Because there is a problem. Want to try fix it?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?
I have I cloud 2.0.2.187 loaded just downloaded yesterday.
Maybe you are looking for
-
Does any one know if there is a way to input non-English in the YouTube Search?
-
Can I show location name in map by Japanese in Power View / Html5 / Office 365 ?
Can I show location name in map by Japanese in Power View / Html5 / Office 365 ? I want to show location name in map by Japanese. at 2014/5/11's Power View / Html5 / Office 365, Map show English location name instead of Japanese location name. Map of
-
Options to insert a BigInteger in a file
Good days, As the title says, this more than a doubt is a search of alternatives. I have a program that performs calculations whose result is a number of several dozens of thousands of digits saved in a variable of type BigInteger. At the moment of r
-
Discuss settings of c5 browser
when you go to default browser of this phone (nokia c5-00 3.2 mega pixel version) i.e. Options>>Settings>>Page [url=http://www.freeimagehosting.net/osaad][img]http://www.freeimagehosting.net/t/osaad.jpg[/img][/url] http://www.freeimagehosting.net/os
-
Hi , We have activated segment reporting in SAP and also have multiple segments(area wise). We have created Co assignment with PC/CC and assigned it at "Contract" level alongwith segment. While posting through FPE1 system is updating relevant segment