I am getting ORA-06512 On Oracle 10g AS wireless component Please Help
the error is;
oracle.panama.messaging.transport.impl.InternalTransportException: transport internal exception: java.sql.SQLException: ORA-01653: unable to extend table WIRELESS.TRANS_STORE by 8192 in tablespace IAS_META
ORA-06512: at "WIRELESS.TRANSPORT", line 313
ORA-06512: at "WIRELESS.TRANSPORT", line 681
ORA-06512: at line 1
Please let me know if some1 knows how to troubleshoot this...
Thanks,
Waheed
Dear Waheed,
Thee Error you have pasted is a Bug in Oracle AS Wireless 10g. You need a patch to do it right. Basically this is performance and maintenance issue.
Its solution is new patch.
Cheers,
Saqib Sharif
Similar Messages
-
Oracle 10g Database startup problem Please help
i am trying to start database but getting error;
SQL> startup
ORACLE instance started.
Total System Global Area 281018368 bytes
Fixed Size 788776 bytes
Variable Size 229373656 bytes
Database Buffers 50331648 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-16038: log 2 sequence# 44103 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'D:\ORADATA\ASDB\REDO02.LOG'
Please guide and help
Thanks,
Waheed.The error stack is interpreted as follows:
ORA-16038: log string sequence# string cannot be archived
Cause: An attempt was made to archive the named file, but the file could not be archived. Examine the secondary error messages to determine the cause of the error.
Action: No action is required
ORA-19809: limit exceeded for recovery files
Cause: The limit for recovery files specified by the DB_RECOVERY_FILE_DEST_SIZE was exceeded.
Action: The error is accompanied by 19804. See message 19804 for further details.
ORA-19804: cannot reclaim string bytes disk space from string limit
Cause: Oracle cannot reclaim disk space of specified bytes from the DB_RECOVERY_FILE_DEST_SIZE limit.
Action: There are five possible solutions: 1) Take frequent backup of recovery area using RMAN. 2) Consider changing RMAN retention policy. 3) Consider changing RMAN archivelog deletion policy. 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE. 5) Delete files from recovery area using RMAN.
ORA-00312: online log string thread string: 'string'
Cause: This message reports the filename for details of another message.
Action: Other messages will accompany this message. See the associated messages for the appropriate action to take.
DB_RECOVERY_FILE_DEST_SIZE specifies (in bytes) the hard limit on the total space to be used by target database recovery files created in the flash recovery area. You should increase this value.
On the other hand, out from the context I guessed it is a 10gRx database, but you should specify this on your thread, as well as specify os details.
~ Madrid -
Oracle 10g Shared Server Problem Please Help
Hi
I am studying for Oracle 10g OCP ; I was trying to start the shared server feature of oracle10g ver 10.2.0.
The database name is :CERTIFICATION10g
The listener name is: LISTENER_CERTIFICATION10g Port:1521
I could register the dispatchers successully with the listener above. However when I open a new connection ; instead of going through the dispatcher it uses the dedicated connection. I tried opening many sessions but the established filed for both dispatchers remained 0
I post a dump of the lsnrctl services command below:
LSNRCTL> service listener_certification10g
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=einstein)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "certification10g" has 1 instance(s).
Instance "certification10g", status READY, has 3 handler(s) for this service..
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
"D001" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1428>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1045))
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1252>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1044))
Service "certification10g_XPT" has 1 instance(s).
Instance "certification10g", status READY, has 3 handler(s) for this service..
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
"D001" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1428>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1045))
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1252>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1044))
The command completed successfully
LSNRCTL>
Why are the connections not being routed through the dispatchers? Any additional setting needs to made?
Please reply asap
Thanls in Advance
Prahalad DeshpandeMaybe because you have in your listener.ora used by your client only this entry:
XXX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YYYY)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED) -> should be SHARED
(SERVICE_NAME = XXX)
(INSTANCE_NAME = XXXX)
(HS = OK)
) -
Oracle 10g XE Event Logs - Please help
I'm running 10g XE on a Virtual 2003 Server. My Applicatin Event Logs the following events. I will get up to 20 events per minutes. I have posted the event description. Please advise. Thank you,
The description for Event ID ( 5 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: QMNC, xe.
The description for Event ID ( 16 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: xe.
The description for Event ID ( 34 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: ACTION : 'CONNECT' DATABASE USER: '/' PRIVILEGE : SYSDBA CLIENT USER: NT AUTHORITY\SYSTEM CLIENT TERMINAL: [Server FQDN stated in this area]: 0 .Hi Jab
The last event is something Oracle logs per default. Every time someone logs in with sysdba privileges, it is logged to the event log. Read more in the manual
Security guide, chapter 8
Try to check the parameter
AUDIT_TRAIL
in the database
show parameter AUDIT_TRAIL
If it is set to OS and you have enabled auditing, then more events are written to the event log.
Best wishes,
Kennie
The description for Event ID ( 34 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: ACTION : 'CONNECT' DATABASE USER: '/' PRIVILEGE : SYSDBA CLIENT USER: NT AUTHORITY\SYSTEM CLIENT TERMINAL: Server FQDN stated in this area: 0 . -
We are getting ¿ stored into our Oracle 10g database (Microsoft fault)
We are getting ¿ stored into our Oracle 10g database that is using WE8ISO8859P1 character set.
Problem is caused by the following:
Microsoft released software (in particularly MS Word) before considering any ANSI or ISO standard (although they claimed so).
At that time of pioneering graphical interface - they were the standard. Since then things changed. Microsoft initially targeted US marked, however very soon they wanted to expanded to Europe. For that they needed to get standardized character set instead of one initially being in use. Microsoft re-mapped character set in newer applications using Windows-1252 character set which is compatible with ISO-8851-1 (we are using in our Java Web applications). That cleared obstacles to forward on European market, where extended characters are necessary (like in French, Dutch, German languages...)
What happened with the initial character codes before Microsoft agreed with ISO to standardize characters? Well - Nothing.
So what are the consequences of that?
If we are using Microsoft Word document in conjunction with one of the oldest character set (universe) the ice-age character mapping is still there. So when we "cut and paste" the content to another application, characters sets are not mapped anymore. Especially French language "is sensitive to this" The Microsoft character set in Word decimally coded 146 ( ' ) is very often used in French.
Therefore if the text is generated in MS Word using old character mapping (universe) which we do, and using method of "cutting and paste" we are mismatching character set interpreted by other, newer applications.
Initially in the MS words (apostrophe) ' had code 191; then later after implementing Windows 1252 character set being moved to code 146 in accordance to ISO. Well ISO threat character coded 191 as ¿. So if you are using MS Word universe character set, ' looks like ' but in newer applications or ISO compatible applications it looks like ¿.
Can anyone provide me with periodically cleanup routines that replace garbled characters entered by Microsoft applications into Oracle database ?
Thanks
BrendonA simply update should work.
SQL> CREATE TABLE CHARTESTING(COLUMN1 VARCHAR2(30));
Table created.
Elapsed: 00:00:00.01
SQL>
SQL> INSERT INTO CHARTESTING (COLUMN1) VALUES (CHR(191)||CHR(146)||DBMS_RANDOM.STRING('A',5));
1 row created.
Elapsed: 00:00:00.01
SQL> COMMIT;
Commit complete.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
┐ÆTeoqw
Elapsed: 00:00:00.06
SQL> UPDATE CHARTESTING SET COLUMN1=REPLACE(COLUMN1,CHR(191),'*');
1 row updated.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
*ÆTeoqw
Elapsed: 00:00:00.00
SQL>After numerous attempts you will have to trust me that the characters are correct, my sqlplus isn't working for displaying the characters. -
How to get best material for Oracle 10G PL/SQL
Please help me out to get best material for Oracle 10G PL/SQL form oracle site.
Thanks in AdvanceThere's no special book or material related Oracle 10g PL/SQL. Can you explain what you want ?
Please refer to this page for more information:
http://www.oracle.com/technology/tech/pl_sql/index.html
Edited by: Kamran Agayev A. on Aug 14, 2009 11:41 AM -
Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.
Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?
-
I'm trying to download Lightroom 5 onto my 2nd computer, and I'm getting a message that my license number is invalid, please help!
Keith_Reeder wrote:
Well - as long as he/she has registered it - it's not really going to hurt to do so.
I wouldn't post mine up though...
But in LR registration with Adobe is is not automatic as was the case for PS. It is an optional action that must be initiated by the user. He may not have done so.
now i downloaded the trial version of lightroom in the new computer
OP, be sure that you have downloaded the trial for the perpetual version and not for the rental (cloud) version. -
Hello. I have a problem. I cannot delete any apps from my ipad. It won't even wiggle when i tap and hold on the icon. There's also no restrictions and passcodes in my settings. My photos on camera roll even get lost once i shut down my ipad. Please help.
The preinstalled apps, those that came as part of the iOS, cannot be deleted and will not shake or provide the black circle-X for deletion.
Others should do that if you touch and hold for a few seconds.
If they are not, do a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears. -
I get the "Your purchase could not be completed" message, please help to verify
I get the "Your purchase could not be completed" message, please help to verify
If you haven't already done so, to contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??
Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054 -
I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!
Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
My husband and I both have Iphone 4's. I do not receive any text messages that he sends me. He gets mine though. He sends texts to other iphone users and they get them. I get text messages from other phones including iphones. Please help.
Both of yall need to go to settings, meassages, send and recieve, scroll down to start new conversation from, and make sure you have different email addresses with a check mark beside it. Right now sounds like they are the same email addresses.
-
I am battling to get my Album Artwork updated in my Ipod Touch - please help?
Just a guess here, but it sounds like iTunes is under the impression that some of the song files it is managing are located on a removable drive. Do all of your songs play from iTunes? That might be hard to know if you have thousands of songs, but if a song was imported into iTunes, but the file was deleted afterward (like if you used removable media), you might get a warning like that, and the song wouldn't play in iTunes. Just a thought.
-
Getting ORA-06512: at "APPS.FND_MSG_PUB", line 279 error in Oracle Sourcing
Hi,
We have recently applied Sourcing Rollup 2 J patch in our instance. After this, when the users change their timezone, the system behaves weirdly. The Server timezone and Client timezone are set to Dubai timezone (GMT+4) at site level. If the user is using this timezone, there is no issues. But when the user changes the timezone to something else (anything > GMT+4 or anything < GMT+4), he cannot publish auctions. He is getting error like:
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.FND_MSG_PUB", line 279
ORA-06512: at "APPS.HZ_TIMEZONE_PUB", line 877
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.FND_MSG_PUB", line 279
ORA-06512: at "APPS.HZ_TIMEZONE_PUB", line 1088
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.PON_OEX_TIMEZONE_PKG", line 41
ORA-06512: at "APPS.PON_AUCTION_PKG", line 1052
ORA-06512: at line 1
We feel like this is some issues with the system. Some times, this works, sometimes different kind of errors are seen. When user is trying to log in, another error like the following is seen:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SQL_PLSQL_ERROR. Tokens: ROUTINE = AppsConnectionManager.appsInitialize(int,int,int,int,Connection):-1,-1,-1,0,oracle.jdbc.driver.OracleConnection@192a848; REASON = java.sql.SQLException: ORA-20001: Oracle error -6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
has been detected in FND_GLOBAL.INITIALIZE.
ORA-06512: at "APPS.APP_EXCEPTION", line 70
ORA-06512: at "APPS.FND_GLOBAL", line 64
ORA-06512: at "APPS.FND_GLOBAL", line 1028
ORA-06512: at "APPS.FND_GLOBAL", line 541
ORA-06512: at line 1
When we bounced server, this error went away. But the first error still persists. What could be the reason for this?
Regards,
ArunI traced through the packages. Here is the result:
1. PON_AUCTION_PKG line 1052;
x_newstarttime := PON_OEX_TIMEZONE_PKG.CONVERT_TIME(p_open_bidding_date,x_oex_timezone,x_timezone);
'x_oex_timezone' is the 'Server Timezone' profile value at site level. 'x_timezone' is the user's timezone. If the user's timezone is not a valid zone (checking done in PON_OEX_TIMEZONE_PKG.VALID_ZONE procedure), this param is assigned the value of 'x_oex_timezone'.
2. The PON_OEX_TIMEZONE_PKG.CONVERT_TIME procedure calls the procedure HZ_TIMEZONE_PUB.Get_Time(), and I hope here the issue starts. The OUT parameters to this procedure are toDate, status, msg_count and msg_data. Note that here the msg_data is defined as VARCHAR2(100).
3. Within the procedure HZ_TIMEZONE_PUB.Get_Time(), the error is raised from line 877. This is a WHEN OTHERS case of this procedure. This is from the API ;
FND_MSG_PUB.Count_And_Get(
p_encoded => FND_API.G_FALSE,
p_count => x_msg_count,
p_data => x_msg_data);
4. Next error from FND_MSG_PUB is from line 279. This is within the procedure FND_MSG_PUB.Count_And_Get, when executing the following statement:
p_data := Get ( p_msg_index => G_FIRST ,
p_encoded => p_encoded );
5. The 'GET' procedure, sets the value from global table 'G_msg_tbl( G_msg_index ).encoded_message ' to the p_data variable, and here is a potential slippage. The global variable can hold a value of upto 2000 characters. But the p_data is originally defined to be of size VARCHAR2(100). I think this can cause the issue. I am not sure what is the message getting assigned to the global variable here.
Could this be the problem? Inside the code, some assignments to fnd_mesage are done. But some of those messages are not present in our database (fnd_new_messages). Any clue on this would be greatly helpful.
Thanks,
Arun
Maybe you are looking for
-
Is there a null operator/command in java?
In a lot of languages there is a null statement that does nothing such as NOP in assembler. It's useful if you want to test for something and only perform some action if that test is not true. i.e. it can be cleaner than testing for something to not
-
When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?
-
NIGHTMARE! Signed Applet - No Access. Please Help.
Hi: I'm trying to make a signed applet gain access to my directory structure. I created a simple applet to test with one line: sErr = System.getProperty("user.dir"); The code is below. I sign it using the following: keytool -genkey -keyalg rsa -store
-
Whenever I move my laptop a little (like when I'm using it on my lap and shift my position) a message appears saying that the HDD was affected. Is this normal or dangerous? It gives me the option to not have this message appear again. What should
-
Catalyst drivers and 3D games. Help me!
I just saw that Catalyst drivers were updated to support the new Xorg.... nice. So, I do a yaourt catalyst. All was fine until I rebooted. Then I saw MineCraft won't run! Odd... it was complaining about LibGL. Then launched LinCity-NG... same thing.