I am having trouble connecting at McDonalds & other open sites. The system shows connected but the internal sign on screen fails to display. USING 7
I open an HP at Mcdonalds. Firefox loads fine and the bar on the computer shows connected to the network. Firefox does not display the Mcdonalds sign in screen. after several reloads and attempts to connect the Mcdonalds sign on screen will finally display. After sign in everything works fine. I have most current version of FireFox . System is new and on Windows 7 Machine is an HP with i7 processor.
Same version on a thinkpad under XP works fine every time.
Thanks for any advice you can give
Mike Wilson
Is that with your own computer via a wireless connection or with a public computer?
If it is your own computer then your security software may be blocking data.
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
You can try to clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Similar Messages
-
I am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people. They are in Japan I am in Australia. Would that make a difference?
Unable to make or receive FaceTime calls after April 16, 2014
-
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?
Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this. -
I'm having trouble connecting my iphone to my itunes on my computer
So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!
Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
I have no idea what that means.
I don't have that option on the side that says what device is connected so I can't sync or anything. -
I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. This just started happening today (2/19/14)! Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!! BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops. Again, HELP!!!!
You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.
Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks! -
I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned
Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?
-
Having trouble connecting computer to TV with sound
I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor). Any help would be greatly appreciated. Thanks
Sorry to tell you that DVI does not support sound. You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
Ciao. -
Hi,
My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network. It identifies my wireless connection but then says 'unable to join the network' with the word 'Dismiss' underneath. Any ideas on what I can do? Thanks!!Hi
Thanks for your reply. I've tried resetting a few times. There is no 'tick' next to the name of my wireless connection so it won't connect at all. I think I may have to do something with my router as there is an arrow button to press next to my wireless name, this takes me to a screen which asks for IP address, then has options for DHCP BootP and Static, it asks for Client ID DNS etc - all gobbledegook to me!! Perhaps my router is blocking the Ipod?
Thanks anyway! -
Im having trouble connecting ipod to denon avr x1000
im having trouble connecting ipod to denon avr x1000
Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last. -
Having trouble connecting ipad to computer
having trouble connecting ipad to commputer
I assume that you mean iTunes is not recognizing the iPad.
iOS: Device not recognized in iTunes for Windows - Support - Apple -
I am having trouble connecting IPAD1 to wireless any suggestions?
I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
having trouble connecting iPad to the TV to play a video
Hi Norfolk33,
It sounds like you are trying to Airplay Mirror your iPad to your Apple TV.
Please see this article for help troubleshooting AirPlay Mirroring.
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Best regards,
Nubz -
Having trouble connecting column to column using niSwitch on a PXI 2530
Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module. I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups. When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1". c0 and c1 are example columns I want to connect. Any help is appreciated.
You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
Start with using NISE, and see if you like it.
http://www.ni.com/pdf/products/us/3msw112-113.pdf
Srdan Zirojevic
Maybe you are looking for
-
My iMac is telling me the computer is already associated with an Apple ID, and since it is my husbands, I can not access my library even though I am logged into MY Apple ID on my User Login. It's telling me I can not access my iCloud purchases for 86
-
My laptop (Win 7 Home Premium) with iTunes library is getting unstable, needs a HD reformat and I have to backup the library so I can restore later . I Have iTunes 10.6.1.7. and have spent a lot of time checking the knowledge base and postings but c
-
What are the exact connections to a BNC2110 to test event counters in MAX?
I am trying to test my 6034E / BNC-2110 setup, using MAX. The anallog inputs seem fine, but I am having trouble getting external events counted by Counter 0 or 1. I am testing the device using Test Panels in MAX. What is the precise wiring to do t
-
Inserting Record in Two Databases
Hello , i want to save the record in two database 1 oracle 9i r1 2 MS access what is the best way to do
-
Please help me on this problem
public class DBAdapter { private Calendar calendar; public DBAdapter( Context context, String harborCode, Calendar calendar) this.calendar = calendar; public Calendar