I am looking for LabVIEW instrument drivers for Audioprecision test equipment. It looks like you do not support any Audioprecision intruments?
I also do not see any support for Keithley 2420 Sourcemeters.
Hi Kristen,
If you search www.Keithley.com you will find an instrument driver for the 2420 device. Go to the "downloads" section and search for 2400.
I am not sure what you mean by Audioprecision instruments. If you had a specific driver in mind, I would check with the instrument manufacturer. Often times they develop and support the drivers since they know the instruments far better.
If you do not see the driver on their website, please submit a request at http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer.
We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driv
er (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at:
http://www.ni.com/devzone/idnet/development.htm
Hope this helps out!
Best Regards,
Aaron K.
Application Engineer
National Instruments
Similar Messages
-
It looks like you have not created any subscriptions yet.
We have a company LIVE id that we used to setup Azure storage under BizSpark. I have added my persohnal LIVE id as an administrator and that works fine to manage the portal.
When I go to "View My Bill", I get a page with the message on the title of this posting.
Is there no way for me to view billing information as an administrator rather than the user id that created the Azure account?
Thanks, Dave
DaveHi,
As far as I know, only subscription owners have any access to the billing data, you need to be a subscription owner to view billing.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
This might be related to my post about not being able to enter a column name in the where clause, and Q&A always using COUNTRY_OF_ORIGIN.
Anyway, I took my original designer file, removed the first page of the report I dd, then added a new page, but this time with a visualisation of sales amount by product name. Saved the whole lot to a new pbix file, and uploaded it into the PowerBI
cloud. Pinned the visualsation to a dashboard, and started to enter a query.
Up pops the message 'It looks like you haven't added any data to this dashboard' etc, etc.
But, but, but I have uploaded the data. It's all in my pbix file. It seems that PowerBI usese the first column of my first dataset as the master for column names in the where clause. And if you do not have a visualisation that uses that column (i.e. COUNTRY_OF_ORIGIN
in my case) then Q&A doesn't think it has a dataset.
I am going to try some other tests to see if I can persuade PowerBI and Q&A to do its business properly.
AngusThe reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Best way to distribute LabVIEW Instruments Drivers.
Hello,
I'm trying to stick to the standards described just there:
Developing LabVIEW Plug and Play Instrument Drivers
Instrument Driver Development Tools and Resources
Instrument Driver Guidelines
However, I cannot see clearly what is the best way to distribute the LabVIEW Instruments Drivers, except that I need to be compliant with those standards to be on the IDNET (Instrument Drivers Network).
Here is a couple of questions I'm not really sure about their answers:
Is it okay to use a .NET dll and to make some calls?
Is it fine to hide the Block Diagram? With passwords in the Drivers
Can we put prevent the modification
In my situation several devices (or let's say modules can controlled through one communication medium), so basically I might have one instrument drivers for several things.,,
May I use some OOD? In order to control the equipment with methods and set some properties and encapsulate the communication stuff in classes, some equipments could be consider are inherited from others (more recent for instance), or this is totally prohibited by the guidelines above?
What is the most suitable Specification Build type: Packet Library or other? If packed library, how to handle the early version created issue when opening the lib with newer version of LabVIEW then?
How to deal with the copyright thing, do I need to copy and paste the copyright on both the Front Panel and on the Block Diagram?
Is this copyright enough: "Copyright (c) <Company Name>. All rights reserved"?
Solved!
Go to Solution.Ehouarn wrote:
Hello,
I'm trying to stick to the standards described just there:
Developing LabVIEW Plug and Play Instrument Drivers
Instrument Driver Development Tools and Resources
Instrument Driver Guidelines
However, I cannot see clearly what is the best way to distribute the LabVIEW Instruments Drivers, except that I need to be compliant with those standards to be on the IDNET (Instrument Drivers Network).
Here is a couple of questions I'm not really sure about their answers:
Is it okay to use a .NET dll and to make some calls?
Is it fine to hide the Block Diagram? With passwords in the Drivers
Can we put prevent the modification
In my situation several devices (or let's say modules can controlled through one communication medium), so basically I might have one instrument drivers for several things.,,
May I use some OOD? In order to control the equipment with methods and set some properties and encapsulate the communication stuff in classes, some equipments could be consider are inherited from others (more recent for instance), or this is totally prohibited by the guidelines above?
What is the most suitable Specification Build type: Packet Library or other? If packed library, how to handle the early version created issue when opening the lib with newer version of LabVIEW then?
How to deal with the copyright thing, do I need to copy and paste the copyright on both the Front Panel and on the Block Diagram?
Is this copyright enough: "Copyright (c) <Company Name>. All rights reserved"?
Not sure about 1) but 2) and 3) are definitely a no go if you want your library to be distributable through the ID network. The standard only allows for DLLs in that are really developed in C but would require you to also distribute the C code as far as I understand.
OOP may not be a problem.
Packed Library is definitely not something you want to do. They only work in the LabVIEW version in which they were created. You will hate the moment you decided to go with packed libraries as requests come in for other LabVIEW versions and your drivers are bashed on all discussion forums as being a pain in the ass to use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??
It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond. -
I am using iphone 4 and just updated the software on my mac but wanted to restore my calender/contacts/messages after backup. itunes is requesting for a password to restore backup but it is not accepting any of my iphone passwords. what password does it require? If i cannot remember this then how do i continue backup without the password request?
If you have a corporate Exchange account set up on the phone, the administrators can require encrypted backups. Try using your Exchange password.
-
I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?
What is your WAN speed currently and projected WAN speed in the next 3 years?
-
I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.
I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.
-
What's with the new Firefox 8.0? I made the mistake of updating mine and about 30% of the icons in bookmarks disappeared. It looks like you are requiring a favicon. Anyway, BAD IDEA!!!!!
Briansyddal - you might be able to manage your phone without a PC, but many of us can't, especially those of us with large iTunes libraries. How do you propose I manage my 250GB of music using only a phone? Maybe I could go out and buy 10 iPhones and spread my library out among them!
Catz537 - I have the same problem as you and I've spent hours on the web trying to find a solution to it. It was a problem with iOS 7 and 8.1.1 doesn't fix it. The the only advice from Apple is completely useless because it requires you, effectively, to delete and recreate your iTunes library and lose all your metadata, album art, notes etc and there's also no guarantee it will work. I wish I could be more help (even more - I wish Apple could be more help) - I updated to 8.1.1 at 1400 today. At 2200 I'm still "waiting for changes to be applied" for a measly 16GB of music transfer. -
Is there a way to have parallax scrolling and a changing slideshow? (so the slideshow looks still and it looks like you scroll your content over it again)
You can apply opacity to images or define key position for slideshow so that with page scroll the opacity changes and will bring the similar effect.
Thanks,
Sanjit -
Why does "It looks like you haven't started Firefox in a while...." message appear?
Have been trying to remove (for the second time) the "Antivirus Security Pro" virus from this laptop (which insidiously has invaded Firefox to the extent of display several pop-ups [incl. Recommended sites list; security rating of the active webpage tab displayed; video advertisements; scroll down and enlarge the screen shot in following post: https://support.mozilla.org/en-US/questions/959400]. As part of this process was instructed to shut down & power-up the laptop in Windows safe mode. Upon completing this step I opened Firefox and the following message appears at the bottom of the browser (no matter what tab is displayed): "It looks like you haven't started Firefox in a while. Do you want to clean it up for a fresh, like-new experience? And by the way, welcome back!" There is also a button "Reset Firefox..." displayed to the right of this message and an "X" which is assumed to close out this message. Why does this message appear? Had been on Firefox (while in normal mode) just prior to encountering the re-emergence of the virus attack, so am questioning the reason for this message displaying and am suspicious of it being a part of the viral threat. Am hesitant to either reset and/or uninstall/reinstall Firefox prior to running another scan with Malwarebytes, Adaware and Spybot S&D . In fact Firefox was just upgraded to v.25 two days ago (when the laptop was believed to be free from this virus as well as from the ViewMgr.exe and the AVG/vprot.exe viruses. These initial virus removals were performed in the Windows normal mode, so while awaiting a response to this question, will do the scans and perform any additional manual file/registry search and destroy in the Windows safe mode. Will also try a test run of Firefox in it's own safe mode when the removal processes are completed. Would appreciate a rapid response on whether or not to do a Firefox reset and/or removal if this second attempt at removing this virus is unsuccessful.
The reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
The top of the screen has an owl like icon & then the following message:
Hey there! Looks like you’re using an old version of Firefox.
Don’t miss out on the latest technology & security features.
Get the free upgrade in less than a minute.Dear Colbabomb; thankyou for your links.
So far, I looked at your first solution, Revo Uninstaller and it gives you a 30 free trial. Ergo, it will eventually cost money so I'm leery of using those kinds of programs in general, meaning most "free trials" have unwanted strings attached and often are big probs to get rid of later. Perhaps you can assure me that it is easy and very user friendly, before I proceed. And I already ran malwarebytes and it found nothing tho the program still can't be uninstalled. I downloaded Adw Cleaner and during the install, my Norton's security popped up and warned that there were (low risk) threats with two of their "other offers" and i hadn't even actually clicked to agree either of them. Nonetheless, Norton warned me against the "lyrics finder" and "deal ply." In fact, there was a box already with an x in it, saying that you are accepting deal ply if you x on "next." Well, except I unchecked that box before clicking on next, yet when it went to fully install, it still showed that it was adding itself; so, just before the install was 100% completed, I had to abort the whole thing. I really do hope your other suggestions are programs that you personally know that they don't try and trick you. But right now, I would not suggest Adw Cleaner to anyone. I even read the fine print about what they will try and install and how to decline and it still tried sticking stuff on that i believed I had declined. Anyways, i have to leave now, shall pick up later this evening, if my pc is still functioning. -
Camera settings? The video looks like you are looking down
The video on the iPad looks like you are looking down rather than at the screen. Very irritating when using FaceTime. Is there a way to fix that?
The camera is at the top of the screen. You can see where it is. If you want your contact to see your eyes looking right at them, look into the camera and not the middle of the screen. It might also help if you hold the iPad as far away from your face as possible.
This is just physics and topology - there's no way to "fix" it. You're dealing with the same issues that TV newsfolk have to contend with for every broadcast. -
WOW – IT LOOKS LIKE I AM NOT THE ONLY DISAPPOINTED CUSTOMER!!!
WOW – IT LOOKS LIKE I AM NOT THE ONLY DISAPPOINTED CUSTOMER!!!
This seems the only forum to write to. I have been unsuccessful in finding a channel to write to (email) Verizon Wireless directly and even through the Verizon Wireless Community. I have been a customer for 4-5 years. I updated my phone in August 2014 and wanted to keep my existing plan, since my usage would remain the same. NOW, my bill is 33% higher, I have been unable to comprehend my bill since it have been changed several times on one bill cycle. I called Customer Service on August 25, 2014 and talked to Mona for over 1.5 HOURS to understand what was going on with my account. She could not understand either, or offer an explanation. She stated she would file an IPR Case to get my old plan back. She stated she would get back to me in approximately one week. It is now September 25, 2014 and I am still waiting for resolution. Clearly I am a long term good standing customer. Not sure why I cannot get quality customer service and resolution in a timely manner. CAN SOMEONE PLEASE HELP ME!spgitsrp wrote:
WOW – IT LOOKS LIKE I AM NOT THE ONLY DISAPPOINTED CUSTOMER!!!
This seems the only forum to write to. I have been unsuccessful in finding a channel to write to (email) Verizon Wireless directly and even through the Verizon Wireless Community. I have been a customer for 4-5 years. I updated my phone in August 2014 and wanted to keep my existing plan, since my usage would remain the same. NOW, my bill is 33% higher, I have been unable to comprehend my bill since it have been changed several times on one bill cycle. I called Customer Service on August 25, 2014 and talked to Mona for over 1.5 HOURS to understand what was going on with my account. She could not understand either, or offer an explanation. She stated she would file an IPR Case to get my old plan back. She stated she would get back to me in approximately one week. It is now September 25, 2014 and I am still waiting for resolution. Clearly I am a long term good standing customer. Not sure why I cannot get quality customer service and resolution in a timely manner. CAN SOMEONE PLEASE HELP ME!
There is no customer service email anymore. This is a customer forum, and sometimes reps might answer a question but it usually isn't immediately. If you need prompt assistance, you will need to call customer service, go to a corporate store, or live chat online. As fellow customers, someone might be able to help you sort things out with a bit more information, but have no access to your account at all.
Clearly I am a long term good standing customer.
If you say so...no one on the forums can see your account. Even if you do see a rep chime in on the discussion, they will need to direct message with you to get your account information. You can't include it in your post because that is against the terms of use for the forum. It is that way to protect all of us, as customers.
If your plan was changed in April, and it is a plan that is no longer available, you won't get it back. You have 14 days to restore your account when making a change like that, should you decide you don't like the new plan. The reps can send all the requests they want to, but you won't get that plan back.
Also, there is no need to shout. ALL CAPS IS NOT VERY PLEASANT TO READ, AND GIVES THE IMPRESSION OF YELLING. -
We can't sign you in. Looks like you're already signed in on too many devices
Everytime I open Lync 2013 client on mobile I get this message:
"We can't sign you in. Looks like you're already signed in on too many devices"
I tried to increase the maximum endpoints allowed for the users but still I get this message for all the users who are using Lync 2013 on mobile, sometimes we get the same message for the Lync Client for PC.
Does anyone know how to stop this? Because everytime this message pop up, the Lync client sign out!Hi,
Please try to restart the Lync FE server and BE server to check the issue again.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support
Maybe you are looking for
-
Cannot send a TEXT message to a NEW contact
I don't know if this is because of the 3.0 upgrade.... I can still send a text to someone who I've already sent texts too, and I can simply click their name, and continue the text conversation. But if I click the icon to select someone NEW to send to
-
Is there any way to wipe an iphone 3gs even though I had not set it up with mobile me? My phone was stolen a couple of days ago, and even though i did not have much important info in it (it was relatively new) aside from my contacts.... I'm worried
-
Hello, We are using report S_ALR_87012993 for investment orders to know the actual costs and the plan costs. But in this report we have all the inv. orders (open and close) and if we want to know only the open orders what report can we use? *We want
-
Hi, With my colleagues we are using a dictation/transcription software which automatically creates files, moves them from folders to folders and deletes them. Until now, all this was done on a network drive, but the drive will soon be unavailable and
-
My hand is raised. "I can do that!", I shout from amongst the exhausted mommy group at the meeting. Well, guess what? Apparently, I can't. It seemed such a simple task. We're making a flag and wanted to put the kids' faces & names on it. So, I