I am not seeing video on files captured in PPCC and saved as .mov.

I have captured DV video in PP and it was saved as .mov. When I went to view the file there was no video. I am working on a Mac and have the latest QT installed. Is there a way to save the file in a different way/format?

>captured DV video in PP and it was saved as .mov
Please explain the above, step by step... are you digitizing an analog source, such as playing a VHS tape through a digitizing device to then save a file on your hard drive?
If not what I just described... what are you doing?
Also, mov is a wrapper, what is inside YOUR wrapper?
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Similar Messages

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

DW 4 not seeing GoLive .site file!

I have several sites created in GoLive 7. I downloaded the GoLive 9 free trial, brought them over into GL9. Then I did the "Convert Site to New Structure" command as I have seen suggested. Downloaded the GoLive to DW migration extension and installed it. So far so good.
But when I go to Import GoLive Site, and navigate to the folder where the site file is (there are actually several, only one is the current one), Dreamweaver does not "see" the .site files, even though when I look in the window in explorer, they are there. All I see are the web-content, web-data, and web-settings folders, but no .site files at all.

rich.leach wrote:
> no, the file was not open, and I tried all of the
various search options
> available in the DW Find feature, especially after this
issue was discovered.
> And if DW customers are required to register particular
file types with DW in
> order to have the application successfully search those
files, that would
> warrant a special instruction set or at least a dialog
box somewhere in DW,
> wouldn't you agree???
This is an issue that I have never come across before. You're
using a
non-standard filename extension, so it doesn't particularly
surprise me
that Dreamweaver ignored it. Have you tried entering
.properties in the
list of filename extensions, as I suggested? If that works,
your problem
is solved. All that's needed is for the documentation to be
made more
explicit.
On the other hand, if your filename extension is likely to be
in
widespread use, perhaps it's something that should be added
to the
standard list of files that Dreamweaver handles. Submit a
feature
request to the Dreamweaver team.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Elements 11 not seeing/downloading RAW files. HELP!!!

Hello,
Just got Elements 11 and when I put the card into my pc the download box pops up and it reads the card, but it does not see the raw files, only the jpg files. If I use windows explorer to view the card it sees the raw files fine. I can open raw files from the card into elements 11 editor fine. It just will not see the raw file in the downloader box. I had Elements 7 before 11 and it worked fine.
I have windows 7 and Elements 11 is updated to the latest version.
Any help would be great.
Thanks,
David

Thanks for the reply.
Thats right, not seeing any raw thumbnails. If I just have raw files on the card and put it into the PC's card reader or a USB exturnal card reader all it says is"This divice does not have any supported media". It will show the jpg and tif files. It's a really weird problem. Elements 7 worked fine. All my cameras are old, D700, D3, D300s, D1x so it's not a problem being a new camera thats not supported yet.
I'll try the organizer way and see if it works or I may just use the Nikon transfer software.

I can not see videos on safari YouTube but I can hear the sounds what should I do?

I can not see videos on safari YouTube but I can hear the sounds of the video I use a iPad 2 plz help

There is another thread with same issue. You can see that here-
http://support.mozilla.com/en-US/questions/823830?s=flash+videos+not+working&as=s

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

A file which was created and saved using Adobe Photoshop CS6 is not opening anymore HELP

Hi, please help with my issue which is as follows:
A file which was created and saved using Adobe Photoshop CS6 is not opening anymore and sends a message saying that the file is not compatible.
What should I do, I have invested so much in that file and I dont think i will be able to do it all over again.

That's why people do incremental saves and use backups... You could try to open the file in an image viewer like IrfanView and see which parts are salvagable, but that's as good as it gets most likely...
Mylenium

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface.

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface. A recent network University policy change. The only way to fix this, is if you use a manual proxy configuration in Firefox. So all 100 + uni iMac's can only use Safari as I would need to do a profile push to all 300 students and I am unsure what file carries the proxy information.

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface. A recent network University policy change. The only way to fix this, is if you use a manual proxy configuration in Firefox. So all 100 + uni iMac's can only use Safari as I would need to do a profile push to all 300 students and I am unsure what file carries the proxy information.

When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup. I can not find this backup file to delete it and free up the space

When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup. I can not find this backup file to delete it and free up the space

OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.

TS3999 I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

This is the situation with Snow Leopard and existing iCloud accounts:
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.
Address Book won't sync: this page has a convoluted hack to make it sync which has been reported as working (and as not working by others). I've not tried it.
There are a couple of alternative syncing services you might like to consider, though they're not particularly cheap:
Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
Fruux syncs Calendars, Tasks and Contacts beetween a wide variety of devices (not using the iCloud server) including Snow Leopard and above, Windows Outlook and Thunderbird, Linux Thunderbird, and iOS and Android devices - see their compatibility chart (click the blue 'i' for a caveat about Snow Leopard). It's free for one user, two shares, two devices; above that pricing starts at €4 per month.
(I have no connection with these firms and have not tried Soho Organizer, though both have had good reports and I've found Fruux to work well.)

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific fol

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next

if you have a win os you should have dl'd an exe and a 7z file.
put both in the same directory and double click the exe.

Encoder 3.1 on Windows 7 64bit does not see video card

hi
any help or suggestions would be greatly appreciated;
We are running Newtek's VT[5] on a windows machine and have been
very successful running Flash Media Live Encoder 3.1, streaming Live
to a server.
Recently we were upgraded from XP and 32bit to Windows 7 and 64bit;
Now the encoder does NOT see the video, although it recognizes both
the VT video device and VT audio device. My understanding is that
Flash Media Live Encoder 3.1 should run on the operating system
and with Newtek VT[5] (even though the VT capture card is not on Adobe's
official list)
http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf
Of course....Adobe wants me to purchase a contract for tier-2 support to answer
the question of whether the encoder will work on our 'new' setup.
again,
any help or suggestions would be greatly appreciated;
calvin tullos
space telescope science institute
[email protected]

Are you sure that correct and latest device drivers are installed on that machine?
Please check the video device settings. If FMLE is able to detect the device it should get the signal and work with that.

Can't see video TS files on DVD.

I made a DVD with Adobe Encore. But on my Mac, I can't see the video TS files nor the data files I have burned on that DVD.
The DVD was authored on another iMac.

Thanks for your help,
I duplicated the disc by right clicking, then selecting duplicate. I received a message stating "you may need to enter an administrator password to change the name...". Entered my password, and the disc was copied to a new folder appearing on the desktop.
I've opened terminal and dragged the folder there, the name appeared in the terminal, I pressed enter, it ran "-bash" and just says that the folder is a directory. I don't know commands for terminal so I'm not sure what else to do here. I tried typing "Is Volumes/foldername" as you suggested, but it says command not found. (I didn't think you were saying to use "Is" as the command, but wasn't sure so I tried it anyway.)
In the get info window it has "Privilege = No Access" for Me, unknown, and everyone. I tried to change to Read & Write, but it does not change. The drop down under the gear thingy, between the - and padlock, is all grayed out and unelectable. This is what made me think something is wrong to begin with. How can I have no access to a folder I copied?
Could this be some sort of Sony format issue when it made the DVD? Setting everything to "No Access" on the disc itself? Or could it be that my mac is not compatible with files that are created elsewhere?

Ipod not seeing videos

someone please help...My son bought a bunch of tv shows through the i-tunes store and downloaded them to the computer. they show up in his library on i-tunes, but won't go on to his i-pod....I've updated every thing that I can think of but the shows still don't show up on his i-pod...please help

What methods have you tried to get the videos onto the iPod? Does your son use manual updating with drag-and-drop to move content onto the iPod, or is he set up for auto-updating?
If he manages things manually, it should be as simple as dragging the TV show files from his iTunes library and dropping them onto his iPod icon.
One more thing - sorry if this is already totally obvious to you - not all iPods can play videos. Only the 30- and 60- gig video iPods can. If your son has a non-video iPod, a friendly email to iTunes tech support explaining the mistake might get him a refund. After all, they should be able to see very clearly on their end whether or not the iPod he has registered is capable of playing videos.

I am not seeing video on files captured in PPCC and saved as .mov.

Similar Messages

Maybe you are looking for