I am unable to activate Mercury playback?

Unfortunately, I can not adjust nvidia quadro k2000d in adobe premiere pro and after effects cs6. for example Mercury Playback Engine set on GPU. the setting is permanently hidden from me? in after effects, I see the map, but I see no details, and I can not render with the card, it just goes with the CPU?it is krazy
thnx

it may be my video card is for adobe cs6 not yet known, and Adobe will later verify this graphics card?

Similar Messages

Mercury playback with GTX 460 still not working

Hey all, sorry if this has been answered before, but I searched and didn't find aynthing.
I just got a GTX 460 2gb GPU and I put it in the cuda approved file, but I still don't think that it is working. When I go into premiere, I have the option of setting mercury playback to use the GPU instead of "software only", but when I render files, I see that my CPU is being used almost 100% and the activity of my GPU does not increase. Is there something else I need to do?

You also have to make some change in the Nvidia graphics control panel for the MPE to function.
Go to Manage 3D settings, click Add and browse to the Premiere Pro.exe file, select this and Premiere will appear in the drop down list. In the field Multi-display/mixed-GPU acceleration, select "Compatibility Performance Mode".
You should now be able to activate CUDA in the Project Setting, general tab in Premiere.

Can't Change Mercury Playback Engine

Everytime I try to change the Mercury Playback Engine from "Software Only" to "GPU Acceleration", I can't. The section to change the Mercury Playback Engine, appears to be grey, like everyone else has been saying.
I have read and searched around the Adobe Forums, but I can't seem to find an answer.
I just got the PNY Nvidia Quadro 2000D. I know it works with Premiere Pro CS5.5, because it's listed on the site --> http://www.adobe.com/products/premiere/tech-specs.html.
I've tried everything I could of think of:
- Uninstalled Adobe CS5.5 then Reinstalled Adobe CS5.5
- Setected Maximum Bit Depth & Maximum Render Quality (From Sequence Settings)
So My Question Is:
How do I fix this problem?

I DID have the option to choose GPU before I had any Graphics Card, in my computer.
Again, impossible.
For one, you cannot operate your computer without a GPU, so saying you previously had none makes no sense. How did you operate the computer before adding this card?
For another, the only way you can select GPU accelerated rendering in Premiere Pro is if you have an Nvidia GPU with CUDA and a minimum amount of RAM; that either means you have an officially supported GPU or you hacked the necessary file to activate the GPU. The only other possible explanation is that you somehow stumbled upon a bug that made this option available. I don't recall that ever being reported before, so you'd be the first that I'd be aware of.
My theory: you had another GPU that was hardware Mercury Playback Engine capable, and replaced it. The original drivers were not uninstalled, and the drivers for the new card were, but there's a conflict. This is just a guess, as you're not providing enough information. If you don't want to, fine--that's your choice. No one will be able to help you without such information, however.
Anyway, good luck to you.

Mercury playback engine makes Premiere crash after cs6 update

Hi there everyone,
I have been working with Premiere cs5 for over a year without any serious errors. Since I upgraded the entire Creative Suite to cs6 however, I am forced to use the software playback method instead of the GPU accelerated one. Using the last mentioned causes Premiere to crash immediately when trying to drag any sort of video on the timeline. This happens in new projects as well as in cs5 ones; and all of the footage involved in both cases was ingested in the wellknown Matrox i-frame codec that always worked fine before. Specs:
Windows 7, 24 gB RAM (not sure whether DDR3 or 5), NVidia Quadro 4000, dual six-core CPU, several terras of HD @ 7200 rpm, Matrox MX02 LE, CS6.
I tried every possible combination and order of uninstalling an reinstalling Premiere, the Matrox drivers and the nVidia drivers, including older versions of the last two mentioned, but to no avail. Though it looks like an NVidia issue (I read somewhere about CS5 and 5.5 certified NVidia drivers but not CS6 yet) this problem manifested right after the upgrade to CS6.
The error reported is about the graphics card being reset, it stops and then recovers, leaving Premiere to hang. The card's hardware reacts with a noisy cooling fan acceleration sound that slowly falls back to its normal rpm.
-Sigh- I am sorry to bother you with this, but does anyone have any idea or experienced something similar? Does the combination of the mentioned elements ring a bell...?
Any help is utterly appreciated !

Hi Harm,
I couldn't find anything in the logs about temperature, but I did find some other logs. However: when I re-install a newer NVidia driver version, the PC will not crash, only Premiere crashes in that case, which lets me believe this is not just a hardware defect. The hardware however does play a role.
What I found in the event viewer are messages like:
A request to disable the Desktop Window Manager was made by process (4)
The Desktop Window Manager was unable to start because composition was disabled by a running application
Fault bucket , type 0
Event Name: LiveKernelEvent
Response: Not available ETC ETC.
Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0 Problem signature:
P1: Adobe Premiere Pro.exe
P2: 6.0.1.0
P3: 4fac933f
P4: e05a
P5: 1 ETC ETC
The program Adobe Premiere Pro.exe version 6.0.1.0 stopped interacting with Windows and was closed.
The NVIDIA OpenGL driver lost connection with the display
driver due to exceeding the Windows Time-Out limit and is unable to continue.
The application must close. Error code: 7
Visit http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=3007 for more information.
Most of all I saw this:
Activation context generation failed for "C:\Windows\system32\vsnpstd3.dll".Error in manifest or policy file "C:\Windows\system32\vsnpstd3.dll" on line 2. The value "X64" of attribute "processorArchitecture" in element "assemblyIdentity" is invalid.
This report pops up hundreds of times... but I don't think the vsnpstd3.dll file, dating back to 2009, could be a problem all of a sudden.
It looks more like a Windows Time-out thing causing to reset the graphics card because the load of graphic data is too big to handle. The only strange thing is that the time-out action is taken by Windows before the usual two seconds have passed, it takes just a fraction of second. This leads me to believe that, during the demand from the Mercury Playback Engine to the NVidia card, "false information" is passed to Windows... i.e. a software problem.
I am thinking about rolling back to Premiere CS5 to see what happens... if this version would be working flawless again, that would be pretty steady proof for doubting the MPE of CS6.
To be continued...

CC 2014 Mercury Playback Engine

Hi there
I'm running a Mac Pro 5.1 with an ATI RADEON 5770 graphics card. Mercury playback used to work with Premiere CC, but now (with 2014) it doesn't.
Is there anything I need to do to activate it again?
Thanks!
Federico

Just to confirm your 5770 has 1GB of memory? Curious if it has DDR3 or GDDR5?
Not sure why it would not be working if you have the minimum 1GB memory requirement. You may try removing the opencl_supported_cards.txt file from the directory.
Hope this help!
Peter Garaway
Adobe
Premiere Pro

I am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.

Unable to activate Genius

I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.

I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps.

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

I upgrade my iPhone 3gs from 4.1 to 6.1 but i am unable to activate my phone now

I upgrade my apple iPhone 3GS IOS from 4.1 to 6.1.4 but now i m unable to activate this phone, and there is no sim card is accepting by this phone.
please help me to solve this issue as soon as possible

Sounds like your iPhone was unofficially unlocked by hacking it. You need to call AppleCare, tell them you only want to know which cell carrier your iPhone is locked to and give them the model and serial number. Then contact that cell carrier and see what their official unlock policy is and if you qualify.

I am unable to activate my iPhone 3gs after installing ios 5. please help.

hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. please tell me how to activate it or how can i get back my original factory settings. need ur help guys do suggest me something.

Hi Vivek,
I am facing this problem too.
Were you able to fix this problem.
If yes then how??

Unable to activate software after upgrading to Windows 8

This post contains one question.
I am unable to activate my Creative Cloud products after upgrading to Windows 8. I have used the Chat service on three separate occasions, and after the employee asks me for my e-mail and order number, determines that they are unable to provide me the instructions necessary to license or activate the software. So I must be forwarded to a special team to help me resolve this problem. During the transfer, I get cut off -- each time.
On Windows 7, I deactivated my Creative Cloud membership through Photoshop.
I upgraded to Windows 8, installing all security updates and restarting the system several times.
Now that all updates are installed, I want to re-activate my Adobe products -- but am unable to find the commands to do so.
I have logged in to Adobe Application manager, using the e-mail address and password that Adobe has in the system for my account.
How do I activate my Adobe products?

Does the solution provided by customer 'kipedias' in this post http://forums.adobe.com/message/4903206#4923341 resolve the issue?

TS2755 Hi, I have been unable to activate my message and FaceTime. Each time I try, I get an error message saying my username or password is incorrect. But that is the same apple id I use in the App Store, and for my iCloud. What could be wrong?

Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

Mercury Playback Engine not available on Macbook Pro Retina 15"

Hi,
I have a Macbook Pro Retina 15" with 16gb of RAM and a 500GB SSD, and am trying to enable Mercury Playback Engine GPU Acceleration (Open CL) on a legitimate copy of Adobe Premiere Pro CS6. For some reason the selection for that option is shaded and stuck on Software Only. I have tried installing and enabling the nVIDIA CUDA driver but nothing has changed. How can I fix this? Thanks.

Looking at this, it doesn't seem that the Retina MacBook Pro's NVIDIA GeForce GT 650M is on the list. And the NVIDIA CUDA driver will give you nothing but heartache (a frequent source of kernel panics).
You might want to take your question to the Adobe Premiere discussion boad to see if there are any current 'workarounds' -> http://forums.adobe.com/community/premiere.
Clinton

How can I open a project that has been created with Mercury Playback Engine GPU Acceleration software, on my trial version of Premier Pro CC?

Hi,
I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
"Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
When I click OK and locate the files I get a message saying "File format not supported".
Can anyone tell me what to do so that we can share project files?
Many thanks,
Jessie

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

Unable to activate Transfer Structure for Generated Datasource in BW3.5

HI Experts,
We have a scenario where the data needs to moved from DSO A to Cube B
we have clicked the Export datasource and created 8(ODS A)
when created IP for this it gave us all selection in selection screen but we required only 3 Characters
 so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump
 with following messages:
 Short text of error message:
 Serious internal error: 
 <h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL 
</h2>
 
 Technical information about the message:
 Diagnosis
 A serious internal error occurred. It could not be corrected.
 Procedure
 The following information is available on this error:
 1.
 2.
 3.
 4. OSS note
 Check the OSS for corresponding notes and create a new problem
 message if necessary.
 Message classe...... "RSAR"
 Number.............. 001
 Variable 1.......... " "
 Variable 2.......... " "
 Source Code Extract
 Line SourceCde
 514 IF g_subrc NE 0.
 515 MESSAGE x001.
 516 ENDIF.
 517 * Check new version neccessary
 518 l_curr_version = c_s_is_admin-odsversion.
 519
 520 IF l_new_version EQ rs_c_true.
 521 IF i_without_versioning EQ rs_c_true.
 522 MESSAGE e023 WITH c_s_is_admin-odsname_tech
 523 c_s_is_admin-isource
 524 RAISING no_psa_version_allowed.
 525 * ELSEIF i_without_versioning EQ 'C' AND
 526 * i_without_transport EQ rs_c_true.
 527 *-- special handling for migration.
 528 *- current system is target system no transport request
 529 *- necessary if a new version is needed
 530 ELSEIF i_without_versioning EQ 'C' AND
 531 i_without_transport EQ rs_c_false.
 532 RAISE inconsistency.
 533 ENDIF. .
 534
 535 IF i_objtype = rsa_c_istype-data.
 536 * check type of InfoSource first
 537 SELECT SINGLE issrctype FROM rsis
 538 INTO l_isrctype
 539 WHERE isource = c_s_is_admin-isource
 540 AND objvers = rs_c_objvers-active.
 541 IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.
 542 * if generated ODS InfoSource,
 543 * no PSA versioning possible
 >>>> MESSAGE x001.
 545 ENDIF.
 546 ENDIF.
 547 l_next_version = l_curr_version + 1.
 548 c_s_is_admin-odsversion = l_next_version.
 549 l_transtru_odsname+13(3) = l_next_version.
 550 * Don't use old progname but create new one
 551 CLEAR l_progname_ods.
 552 ELSE.
 553 l_next_version = l_curr_version.
 554 ENDIF.
 555
 556 ENDIF.
 557 * set transtru_names for IDoc
 558 c_s_is_admin-odsname = i_transtru_name.
 559 c_s_is_admin-odsname_tech = l_transtru_odsname.
 560 WHEN OTHERS.
 561 ENDCASE.
 562
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AM

Hi,
Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
Hope Helps,
Regards,
Laj

I am unable to activate Mercury playback?

Similar Messages

Maybe you are looking for