I am unable to reverse print for t shirts

i am trying to make a t shirt using iron on paper and I'm unable to find reverse or mirror image in my printer settings

Hi, not all printers have the mirror option.
Use the free IrFanView program and select under Image the Horizontal Flip option.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

There are severall units out there with 4 ink cartridges, not sure about the option to revesre image in the printer, however mirroring an image is possible in most software programs. Even in paint i think.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Unable to reverse PGR for return delivery (RL).

Prerequisites:
WM managed storage location w/o HU and SU
Document flow
1. Sales order
2. ODB
3. TO
4. PGI
5. Invoice
6. Return sales order in reference to invoice from step 5
7. Return delivery RL
8. TO: Materials put away from interim 904 storage type to warehouse storage type
9. PGR
10. VL09: Reversing goods movement (step 9) for RL delivery (step 7)
In step 10 I am getting error:
Message no. L9009: Storage bin PL1 904 8200000192 does not exist (check your entry).
I have made work around:
1. LS01N: Creation storage bin (904/8200000192)
2. VL09: now it is OK
3. LT10: from WH storage type to 904/8200000192
4. Delivery status (Picking) is not refreshed (like in LT0G)
It works but in my opinion it is another scenario for this.
My question is how to reverse PGR for RL return delivery (without work around I described)?
Andrzej

Hi Csaba,
1. L9005 message
thank you very much for you response. As I wrote, now I have no problems with L9009 message (I was blind not to notice such obvious settings in V_T321 and V_T333)
Before i wrote this message I have double checked this configuration. But I have did not notice bad setting. Now VL09 works OK.
The open problem is that delivery still has picking/WM status not refreshed.
I've made nearly the same settings that you proposed. I am a little bit confused that you wrote:
if I do not enter '1' in RBLVS I get error message L9005
RBLVS is a "RefMvtType WM" and you set it to 656. You probably mean BSLVS - Special stock indic.
I have following settings:
LGNUM;RBLVS;BSLVS;KZBEW;SOBKZ;BSSKZ;LGREF;BWLVS
PL1;658;;L;;;;652
In my case BSLVS='' (but our cases are little bit different)
2. picking/WM status not refreshed
I have made work around with deleting delivery/delivery items.
As we noticed standard SAP system is not set to manage the reversal of return delivery with WM
Thank you for confirming my doubts.
Andrzej

Unable to reverse GR for subcontract PO

Hi expert,
When i try to reverse GR using 102 for subcontract PO,it prompt error Message no.M7389 Of the required quantity of material xxx,xxx PCA remain(s) open
Any idea on what is the causes?

Hi,
The same problem was faced by me and unable to get any reasons.
But, I was managed to cancel the doc. thro' MBST.
Please try this out.
Regards,
Siva

Unable to specify printer for print jobs in Java7 for OSX

Hi, I'm developing a simple software that would monitor a folder for new documents and print them automatically. Monitoring the folder was the easy part with WatchService in Java7, but I'm running into problems with printing. Namely, I'm using java.awt.print.PrinterJob to print the document, but the print job is always sent to the default printer, instead of the printer that was specified.
PrinterJob pPrinterJob = PrinterJob.getPrinterJob();
PrintService[] psArr = PrinterJob.lookupPrintServices();
for (PrintService ps : psArr) {
if (ps.getName().equalsIgnoreCase(specifiedPrinterName)) {
pPrinterJob.setPrintService(ps);
break;
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
//specify print attributes....
pPrinterJob.print(pras);
The code looks simple enough, and calling getPrinterService() returns the intended printer after specifying it using setPrinterService(). However, regardless of the printer specified, the print job is still sent to the default printer. Tried on both Java 7 Update 4 and Update 6 for OSX with the same result.
Update: Got my hands on a Win XP machine and tried out the same piece of code using Java 7 Update 6 for Windows. Guess what, the print job was sent to the specified printer! I'm pretty sure this is an OSX specific issue now. Has anyone come across this issue previously?

Hi,
I have the exact same problem on OS X 10.8.2 with Java 1.7.0 Update 21.
When I call PrintServiceLookup.lookupPrintServices(null, null) I get three distinct printers, but no matter which of the three I specify, the print job is sent to the default printer.
The code works as expected when tested on Windows and Linux machines.
Any help is appreciated!

I am unable to see print preview for my sales orders in VA03.

Hi All,
I am unable to see print preview for my sales orders in VA03.
When ever i am selecting an order and from
menu-> sales document-> issue output to
it is raising information message on my status bar no output
has been selected for printing.
How can i view may print preview for sales order other
than from va02/vao3.
Can we view preview of a sales order if there is no output type is mapped to
form. if yes can please give me the steps.
Thanking in advance.
Best Regards,
TRS GUPTA

Hi,
Go to NACE transaction , from there choose the V1 application,now click on Output types. now see the Output types for print related.
Now use them for your preview.
you need to provide Output type to view the preview
May be you are missing some configuration(in your case Order type may be Z* so it requires Some Config ).
Regards
vijay

Unable to see print preview for Sales PDF form SLS_FORM01 SD_SLS_PRINT01

Hi,
I tried to use pdf forms for my sales print forms . I maintained standad driver program SD_SLS_PRINT01 and pdf form SLS_FORM01 in NACE. But i am unable to see print preview . But i am able to view standard purchase order pdf form MEDRUCK_PO . When i debugged the code, i found an excetion " %fpcomp_usage_error '039' textkey-name" , it gives style does not exists . The exception detail is as follows .
Exception : USAGE_ERROR
Message Id : FPUIFB Message Number : 039 .
Message : Text object doesnot exixts .
Kindly guide me to overcome this issue .
Thanks and Regards,
S.Sivakumar

this is no adobe specific error, it's from your application. You've some entries in your customizing so that specific texts are expected by the form.
go to the context, search your text there and check wheter the checkbox "no error when text is missing" is activated or not...
if the textbox is not activated but the text is missing --> thats the behaviour you have

Unable to move print to preview pane for printing in Lightroom 4.Tried deleting agprefs file and restart with no success! Thanks in advance.

Unable to move print to preview pane for printing in Lightroom 4.Tried deleting agprefs file and restart with no success! Thanks in advance.

Sorry to bump this - but does anyone have any idea what could be wrong?

Setting The Printer For Reverse Or Mirror Image

Hello,
IM trying to create some T-Shirt Transfers, but I Would Like To Know How To Set The Printer For Reverse Or Mirror Image?
Thanks!

click print, go to 'preferences', under the 'finishing' tab, orientation section your choices should be [ ]portrait, [ ]landscape, [ ]MIRROR IMAGE.

'unable to send print data' on HP Laserjet 1536dnf MFP

Hi there,
I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
Thank you very much! Regards, Luc.

Hi jemenake
I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
If this doesn't resolve the issue continue to the next steps.
Print a configuration report from the LaserJet 1536dnf.
Press the Setup button, (the one with the wrench on it)
reports, press OK, Config Report, press OK.
Check to see if the ip address is valid.
If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
Delete printer on mac.
Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the button on the bottom left corner of the screen.
Add printer on the mac.
Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
If the ip address is not valid please let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Unable to reverse the GI of non-valuated material in Vl09

Hi All,
My user is unable to reverse the GI for the non-valuated material . The error message occurs " doc 4901151816 does not contain any selectable items".The given below the doc .flow.
The user did GI for 901 mov.type in VL02n . I have observed that there is no reverse mov.type for 901 in the system . Is the error occurs due to non-exist of the reversal mov.type?
Please advise.
Free of Charge 70219835 / 10
. Purchase order 2245102298 / 10
. Delivery Standard 80323135 / 10
.. WMS transfer order 11216908 / 1
.. Handling unit 348260 / 1
.. GD goods issue:delvy 4901151816 / 1

Hi,
Go to OMJJ and here for movement type "901", under option "Reversal/follow-on movement types" assign the reversal movement type as 602 or (902 copy of 602) and Type of Posting as "2" (Reversal(qty cannot be entered; gener.of matchcode))
And Reverse in VL09.

[Solved] CUPS: Unable to write print data: Input/output error

I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.

Unable to start print job. Is printer availble? CS3 loaded on Windows 7 64bit

Hello to everyone:
I have a network of PC's. As part of their basic install I load on CS3. I have started to incorporate Windows 7 and found the following problem on all of them but not on any of the XP's.
When my users try to print from Acrobat 8 they receive the following message: "Unable to start print job. I there a printer?".
This happens when they try to print to only one of our printers, the HP designjet 1055. I have both 32bit and 64bit drivers installed on our print server.
I did read a post somewhere that the common files in program files might be playing up because there are 2 program files location on windows 7 - but I didn't get any further on that one.
I'm sure there's a work around for this issue, there has been for the 101 others.
Does anyone have any ideas?

Yes, we have AA8 here that comes with CS3 and for the most part it seem to be working fine. Sure I've had the odd compatibility glitch with getting the 32 app to work on win7 64 but I am stumped with this one printer. I have 7 other normal network printers (not large format) and I can print to those through AA8 fine.
If windows can see the HP printer and other apps can print to the HP printer but AA8 can't and at the same time AA8 can see and print to all the other printers it makes me think that this is ether a driver compatibility issue or some programmatic issue. Perhaps I need to point something in the registry to something else?

Unable to reverse Service entry sheet posted in earlier prds

Hi All,
We are unable to reverse the service Entry sheet created via Shipment cost document. As the Shipment cost document was created in the month ofJanuary 2011. And now that period is closed. But I am looking the way wherein by changing the posting date to current month date. So that system should allow me to reverse the cancellation of service Entry sheet
by ticking the cancellation tick mark under the Settlement Tab.
I need inputs for reversing it in current month. in the similar lines. as we reverse the service entry sheet in ML81N and have an option to change the Posting date. But in VI02, Date Cancellation field is greyed out and we are unable to tried it out.
So basicaly how to change the posting date in shipment cost document, sothat cancellation should happen in date which is being entered by user.
Thanks
Nitin

Hello there,
I had the same problem yesterday and we were able to do the reverse of the ship cost provision and the repost using posting dates from this month. Here is what we did:
For reversing using a different date.
Go to VI02, double click on the position, go to "settlement" tab and select "Cancellation" box, then use the menu bar in the "Item" -"Redet. settlement date option" , you will have an information pop up message "Redet. settlement date not possible - account
already assigned to item" , just hit enter and the "date cancellation" field will be now available to modify. Put the date you desire and save. If you go to the document flow, you will notice the cancellation is done and the posting document is in the FI period you desire.
To repost the same shipment cost with the new date (current period).
Go to VI02, double click on the position, go to "settlement" tab , Hit the button "delete account assigment" and the settlement date field will be available for change. Modify the date, save and leave the transaction.
Enter again and from the menu go to "Item - account assigment", and you will notice the system already redetermine the account assigment, go back (F3) and the "Transfer" field is not available to select and save.
Then you have the new service acceptance posted with the current period.
I spend some time and couldn´t find the answer in other websites, now that i have the answer, I hope this help somebody else,
Rgds,
Sara

I am unable to reverse print for t shirts

Similar Messages

Maybe you are looking for