I am unable to see a newly added PC under devices in SCCM2012R2 console

Hi,
I am unable to see a newly added PC under devices in SCCM2012R2 console. Plz help me how to add a system to SCCM2012R2 console

Where and how have you added computers? Computers are added when the ConfigMgr client is installed or by a discovery method.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • HT4623 I am unable to see the software update link under settings.please help

    I am unable to see the software update link under settings.please help

    Unless you are already using iOS 5, you have to connect to your itunes (on your computer) by cable, and will not have the update option in your iPhone's settings.

  • Force iPhone to put newly added contacts under iPhone contact group

    I want to be able to have my iphone put a newly added contact under my iphone contacts and not all contacts. Is there a way to force iphone to do this? I am using mobile me, think I remember hearing someone mention a setting in itunes for this. Don't have this option with mobile me.
    Thanks,
    Toby

    I agree with Oregon Farmer. All Contacts contain all contacts from every created group (i.e. "iPhone contacts"), so once you add a contact into "iPhone Contacts", the same info is placed in the "All Contacts" group. Sort of like "Music" in library and playlists.
    There used to be an option on the iTunes, but from this website, it suggests that option was for the original iPhone http://www.apple.com/mobileme/setup/iphone/mac.html
    I was browsing around looking for a way to add a new contact (i.e. from my recent calls list) directly into the "iPhone Contacts", rather than it going automatically only into the "All Contacts" list. If anyone has an idea, I'd appreciate it. I'm also using Mobileme.

  • WiSM, unable to see Interface after adding.

    We have an up and running WiSM, for about 9 months.  It resides in a 6509 chassis.
    I needed to add a new interface for another subnet (previous one was getting over ran, and we have a new project)
    I went through the process of adding the interface.  I ensured it was active.
    At present, from the 6509 I am unable to ping the interface's IP, but I am able to ping that networks gateway.
    From the WiSM, I am able to ping the interface's IP, but unable to ping the gateway.
    I was not the original configurator of the WiSM and the 6509 build.  That person is no longer around.
    On the 6509 I have ensured that the :  show interface trunk shows the VLAN in question.
    I have searched numerous times, and I feel like there is just some nefarious item I am missing on the creation of new Interfaces between the WiSM and 6509.
    Any input would be appreciated.
    Thanks

    Have you double checked the vlan tag, subnet mask, etc for the new interface on the WLC?  Usually when you cannot ping an interface on the WLC (although pings are the lowest priority) it is a configuration error on the above, or the trunk not allowing that interface, etc.
    Thanks,
    Lee

  • ** Unable to see message interfaces in ID under Business Systems

    Hi Friends,
    When I create sender / receiver agreement in ID by choosing the respective Business Systems I am not able to see my message interfaces. Then, I checked the SLD, our SWCV under Products are not assigned in the Business Systems.
    Then, I have assigned our SWCV (by selecting the product, be selecting the SWCV) in tehcnical system and business systems, saved and log off from SLD.
    But, still those message interfaces are not appeared while select the Business systems. Those interfaces are abstract interfaces.  I tried to close the IR and ID, open it again, still the same problem.
    What could be the reason ? Reply friends,
    Thanking you
    Jegathees P.

    Hi,
    a new import of the Business System is not necessary.
    1) Important is to activate the interface in the Integration Repository.
    2) Checking in SLD that all installed check boxes are selected. In the Business System -> Installed Software -> select the Product and check that the SC is selected.
    In IR it's enough to close the Business System and reopen it to see the new interfaces.
    Regards
    Patrick

  • Unable to search Newly Added groups

    Hi,
    I have issue with respect to the newly added groups in shared services. Hyperion Foundation servie 11.1.2.1 , HSS restart needed to see the newly added groups
    When created a new group and did a search on that newly added group, search gets no results found
    This is in 11.1.2.1
    Any suggestions would be highly appreciated
    Regards
    Tejo Jagadeesh

    Hi Tejo,
    We haven't updated to 11.1.2.1 yet, but I am sure you do not need to restart HSS services in order to be able to see the newly added groups. I haven't seen a note in the "Known Issues" section in SS Read Me document: http://docs.oracle.com/cd/E17236_01/epm.1112/readme/hss_1112100_readme.html#_Toc297102406
    Have you opened an SR with Oracle?
    Also, in 11.1.1.3, we have a weird bug with Shared Services. We cannot delete a native group if we login to Shared Services directly using the SS url: https://<server>/interop/index.jsp But if we login to Workspace and then go to Shared Services thru Workspace > Navigate > Administer > Shared Services Console, we are able to delete the native group. I don't think we've ever opened a ticket with Oracle, but I wonder if this is a similar case for you. How do you login to SS? If directly, try to login thru Workspace and see if you can replicate your issue.
    Cheers,
    Mehmet

  • Newly added OAF region is shown in Worklist but not appearing in Email...

    Hi,
    We have a very serious issue in our applications. We have customized Requisition Approval workflow and in the Requisition approval notificaiton, added one extra OA Framework region attribute. The region fetches some value from a custom table and renders it. This region is perfectly alright when seen from the worklist. But the email that is sent for the same notification, the region is not appearing !
    We have checked a lot but unable to find what we are missing here. If it is a problem with the region, then it shouldn't appear in worklist too. The strange thing is that this was working (region was appearing in email) in one instance. When the same code were moved to another instance, it is not working (region is shown only in worklist). Please help me as this is very urgent for us.
    Thanks,
    Arun

    OK, there is other way to check.
    1) Take the notification framework region URL from the Workflow Mailer log ( log should be STATEMENT level)
    2) and copy / paste same URL in a web Browser ( you may login as SYSADMIN user)
    3) and see if newly added region comes?
    Just check if you bounced the iAS after apply the changes on that instance.

  • How to get the Newly added fileds from Oracle to BW

    Hi ,
    We have created the view in the DB side and extracted the data to BW side. After that in the DB side they have added new filed. I want to extract the data for that filed also. But that filed is not displaying in the data source itself. We have deleted the sources system assignment to that particular info source and generated the data source in the source system side, and then also I an unable to get the newly added filed in the data source. We are extracting the data from the ORACLE data base. Please let me know the steps how to get the newly added filed in the data source.
    Thanks,
    Visu

    Hi Yadav,
    yes i have alreday created the info objects in the BW side. In the Oracle DB i can see the fileds in the data sources. Newly added filed is not displaying where as previous all fileds are displaying in the oracle DBside.
    Thanks,
    Visu

  • Newly added contacts don't appear in my contact list.

    I recently upgraded from a iPhone 3GS to a 4S. When I add a new contact on my phone it does not appear in my contact list. If I go to a new text message and type the name it appears as a suggestion and I can select it that way. I'm unable to edit the contact as it does not appear under my contact list. I have synced in through iTunes and even restored it. The numbers still do not show up in the contact list. I've also attempted to log into iCloud and the names do not appear there either. I've turned the contacts off under the iCloud settings and nothing changed. I still cannot see my newly added contacts in my contact list. Please help as I have tried everything I know and have no luck. It alsmot feels as though my numbers are being added to a "hidden" place. Thanks in advance!

    I've never done a sync with any program other than iTunes and iCloud. My groups are displayed in the left corner and they are all selected (I acutally just made up the groups today while messing with this whole issue so there aren't even contacts added to groups yet) and showing.

  • Newly Added Iview now showing in MSS role

    Hi Experts,
    I have a strange issue which is bugging me since yesterday.
    I have a customized MSS role in my portal where i have added one WebDynpro Java Iview to this role. I can see the iview in the MSS role when open the role as object. But ! when i see the same role by assigning to me, i couldn't see the newly added iview in the same role.
    I have added the same iview in several places (worksets) but still couldn't see that iview in the role. I don't understand why it behaves all of the sudden.
    Is it cache problem? if so, i have waited 10 hours and couldn't see the iview still. Should i do something else to show that newly added iview ?
    Thanks in advance.
    Regards,
    Suresh

    Hi JYOTHI,
    As it is custom role , check with your Hr Team for dependency of portal display on backend .
    Gneerally for standard business packages, home page framewokr configuration in backend provides navigation in portal.For your custom role , there might be siimilar configuration whcih hr consultants in your organization knows.
    Regards,
    Koti Reddy

  • Newly added Cal.View Measure does not appear in the BEX Designer

    Hi,
    anybody come about this :
    A newly added Cal.View Measure does not appear in the BEX Designer:
    I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
      and
    added a new measure to the Calculation View
      and
    added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
      and
    see the newly added filed in the Listccube of the(transient)   InfoProvider with a technical generated name
      and do not
    get the newly added measure in the BEX Designer.
    Whats wrong ? What needs to be done ?
    Thank You
    Martin

    Hi Martin,
    Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
    Rgds,
    Murali

  • Users and Group Owners are unable to see their groups

    Hello all,
         I have an issue where security group owners are unable see/read any groups that they own. I have enabled the following  MPR's but still nothing please help.
    Group management: Group administrators can create and delete group resources
    Group management: Group administrators can read attributes of group resources
    Group management: Group administrators can update group resources
    Security group management: Owners can read selected attributes of group resources
    Security group management: Owners can update and delete groups they own
    Security group management: Users can read selected attributes of group resources
    Also when a user logs into the portal they are unable to see any Security groups listed under MY SG Membership. However when we check the group membership they are indeed part of the group both in FIM portal
    and AD.

    Reason might be that user's don't have access to group objects at all or are not able to read some of attributes of a group. Also make sure that BasicUI keyword was added to the specific elements of UI used in group management - this includes navbars but
    also search scopes which are used for group filtering. 
    On the MPRs side:
    Make sure that your Security group users set was not modified - maybe people are filtered out from these MPRs.
    Use explore function in MPR  part of a portal to check what actual MPRs are being triggered when user tries to access group object. 
    Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl
    Hi Tomek,
    Which attributes must a user be able to read in order for this to work? If possible can you provide me with a full list so I can verify that they do have rights to read them.
    I have added the keywork BasicUI to the following sections 
    Under Home Page Resource
    Join a SG
    Manage my SGs
    Search Scopes
    Security Groups (SGs)
    See my SG memberships
    Under Navigation Bar Resource
    My SG Memberships
    My SGs
    Security Groups (SGs)
    As for the security group users set, I have modified it to allow all domain users to be part of this set. When I click View Members all users are listed. 
    "Use explore function in MPR  part of a portal to check what actual MPRs are being triggered when user tries to access group object. "  How would somebody go about doing this?

  • Wired computers unable to see printer on Airport Express...help?

    Hi all,
    I recently set up an Airport Extreme on our office network to offer wireless network access piggybacked on our wired router. I then purchased an Airport Express which I was planning on using as a wireless print server for our Canon i9900 for all office computers connecting wired or wirelessly, which would interface with the network via the Airport Extreme Base Station.
    I have configured the Express as an extension of the existing Airport network, and attached the printer to it via USB. All the computers in the office which have airport cards onboard can see and print from the printer, which is great. The problem is that all of the computers connecting to the network via wires are unable to see the printer (this is under both 10.3.x and 10.4.x, all airport software completely updated.) The Extreme base station shows up for all office computers in their Airport Admin Utility, AND if the printer is connected directly to the Extreme Base Station via USB, all computers can see the printer over Bonjour/Rendevous.
    Anybody have ideas as to how I can get my wired machines to see the printer on the Airport Express?
    Thanks!!

    Applications > Utilities > Airport Admin Utility
    Scan and Select your Airport
    Click Configure
    On the Airport Tab
    Base Station Options...
    Check Enable Remote Printer Access
    iFelix

  • Unable to see the Application component 0PA_PD

    Hi BW Experts,
    I am able to see the application component 0PA_PD under application component PA in our development system. I have activated a data source under 0PA_PD in the development system. I then  moved the data source to our test system (R/3). However in our BW test system, I am unable to see the application component 0PA_PD under PA in the modeling and hence am unable to replicate the data source in the test system.
    Could you please advice what I have to do in order to see the application component in the test system.
    Thank you in advance.
    Sai

    Thanks Mr. V,
    I did replication of the top application component PA but still the 0PA_PD did not show up.
    I also ran the RSA9 and still the 0PA_PD did not show up under the PA. Other application components like 0PA_BN are appearing under PA but not the 0PA_PD.
    I checked the test R/3 system and the data source is available under the application component 0PA_PD. But somehow the 0PA_PD is not appearing on the test BW system.
    Please help.
    Thanks,
    Sai

  • I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request

    I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request.The
    below request I attach with attachment.That attachment coulmn is not apperaing

    I am a little confused, can you please elaborate with screenshot 
    If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

Maybe you are looking for