I can't connect to IMAP server

After updating to version 31, I can't download my mail.
I get a message at the bottom: "IMAP *DOMAIN*: Checking mail server capabilities..."
Nothing ever downloads. Let me know what other information you would need.

smtp.mac.com is incorrect, it should be smtp.mail.me.com
Here are all the settings to use.
http://support.apple.com/kb/HT4864?viewlocale=en_US

Similar Messages

  • Mail.app doesn't hava connection with imap server when changing network.

    Ive got a strange problem after upgrading OSX from 10.6.8 to 10.8.4.
    I have got a xserve, with osx 10.6.8. (mail) server installed on it.
    When i am in the office (LAN) mail works just fine. if iam home and wake my macbook from sleeping i see in the mail app the attention mark telling my something is wrong with the mail account.
    If i open the connection doctor it say's can't connect to IMAP server. if i check my iOS devices there is nothing wrong, everything is working and i can send/recieve mail. on iOS and OSX the settings are the same with SSL enabled and password type.
    When i tried to telnet the mailserver address with the IMAP or SMTP port i get a connection. so, there is no firewall blokking my connection.
    But now the strange thing when i quit my mail.app and start it again the mail gets connection again. So is there a problem when changing networks when the Mail.App is stil active?

    That's just to bad, will it be solved in a future release of OSX?
    I don't know... maybe Apple will force me migrating to Mavaricks.
    it seems that although w'r using DNS, the outside ip gets remebered or the connection isn't closed down properly when putting the macbook to sleep.
    I can try offcource to configure the outside LANip (Non dns) in my mail client.
    I will post with results..

  • Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

    Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
    error showing up, there is no auth-master file in /var/run/dovecot
    this has just happnened over night
    any ideas how to re-install dovecot
    google search goes on about linux but barely any info about max osx server

    auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

  • Mail can't connect to isp server. provider says it's an internal issue

    mail can't connect to isp server. provider says it's an internal issue, mail is set up corectly.

    Are connecting exclusively through IMAP or through POP?   IMAP automatically stores all the e-mails on the server.
    POP gets them onto your Mac.   The advantage of IMAP, unless you desire, you are not downloading all the attachments to your hard drive, and bandwidth issues of downloading slowing you down with lots of large attachments are avoided.   The other advantage with IMAP, you can try a web based e-mail to see if your e-mail program missed downloading everything.    http://www.mail2web.com/ is my favorite web based e-mail.  I recommend at least trying it to see if it will let you see your e-mail.  Any custom folders will be invisible, but at least anything in your inbox should be visible and usable.
    Are you using any other e-mail software for forwarding, such as gmail?

  • I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

    I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

    Whenever I log into icloud.com
    Using what version of which browser?
    iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
    If you have, have you tried clearing your browser cache and cookies?
    For the first tine since 1989 I'm thinking about buying a PC.
    You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
    Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
    Since all this crap started, Mail won't download my Mac.com or me.com email.
    The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

  • HT2954 Mail is not connecting to imap server.

    Mail is not connecting to imap server.But I can browse the internet.I am having a working network connection.how to connect mail to imap so that i can send and receive mails?

    Thank you for reply.Previously It was working good.Later I changed my proxy settings.From that time oly it is stopped working.I tried what you have said.But still it is not connecting.

  • How can I connect to SQL Server CE?

    Hi!
    How can I connect to SQL Server CE ?
    Any idea?
    I found jdbc driver for SQL Server 6.5,7.0,2000.
    But no driver for SQL CE.
    Thanks for any suggestion....

    I am also searching for same answer.
    I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
    I am stuck in driver problem. I can't find that.
    Should I use Oracle Lite or PointBase?
    I am under a lot of stress... like you've been...
    I wish you find and post that....

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

    remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
    does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
    or what's the problem,
    Mahmoud Sabry IT System Engineer

    this issue maybe will be fix by latest version, we still waiting for it
    maybe your issue can be fix using this methods
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
    http://shawn.meunier.com/?p=1#comment-43

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

    Dear Fellas:
    I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
    mysql info:
    ps -ef | grep mysql
        0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
       74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
      501   952   947   0  3:52PM ttys000    0:00.00 grep mysql
    Please help!!

    Fascinated and guessing:
    Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
    I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
    Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
    Just speculating.

  • My ipod touch connects to wifi but can't connect to the server.

    Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
    I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
    Thanks for your time

    Have you tried restoring your iPod touch in iTunes?
    You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
    If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
    Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

    I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
    unavailable"
    PS I tried a lot of solutions from different articles, but the same result. 
    presented below my environment: 
    Two Lync 2010 frontend servers with one pool.
    Two edges server.
    HW load balancer.
    Log from Lync connectivity analyzer.
    User Name: [email protected]
    Logging test parameters:
    SIP Uri: [email protected]
    Discovery Type: Automatic Discovery
    Network access: NetworkAccessExternal
    Selected client: ApplicationLyncMobile2010
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Sending HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured internal channel against
    https://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Sending HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured internal channel against
    http://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for secure (HTTPS) external channel
    Sending HTTP request to
    https://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured external channel against
    https://lyncdiscover.xxx.com/
    Starting automatic discovery for unsecure (HTTP) external channel
    Sending HTTP request to
    http://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured external channel against
    http://lyncdiscover.xxx.com/
    None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
    MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
    Automatic discovery of the Lync server failed. Please verify the server requirements at
    http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
    Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

    Hi 
    Is that Port 443 opened? check the fire wall.
    is that external Lync clients are logging in with out any issues.
    by seeing the Log it is unable to connect on port 443
    Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
    to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting the Mobility issues follows this
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Safari Not Loading Web Pages (Safari can't connect to the server)

    I'm seeing increasing problems with Safari being unable to connect to websites. When the problem starts to manifest itself you see the error:
    Safari can't connect to the server.
    Safari can't open the page.
    Then you see the URL information. It is always seems to be sites that are trying to load HTTPS pages.
    Clearing the cache and resetting Safari will make it go away temporarily, but it always comes back.
    Note that when this happens you might happen to see something like this in the address bar:
    file:///Applications/Safari.app/Contents/Resources/

    I'm having the same problem, I can open safari but when I try to go to a website it just says "server stopped responding." I just updated to the new version and that's when it started happening, it was working find before the update. Any suggestions???

  • *URGENT* How can i get a website to load instead of saying "Can't connect to the server"

    My computer is not loading a website. This is urgent for university work!! My computer keeps saying: "Can't connect to the server" no matter what internet browser i use, and other people with Mac's can use it fine! I need it for university work. PLEASE HELP ME!!

    Power off the router. Unplug it from the wall. Wait few minutes.
    Plug it back in. Power on the router.
    Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US
    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

Maybe you are looking for

  • Doubts with conectivity of sound blaster card with thermaltake armor c

    Hi I have a Asus P5WD2 Premium motherboard and a Thermaltake Armor case, im not satisfied with the onboard sound of this motherboard and i want to buy a Sound Blaster X-FI XtremeMusic. My question is, the case has on the top some ports for audio and

  • Call classes from another project

    Hi, i have a (i hope) simple question. Meanwhile i have a lot of custom coding which i uploaded to my J2EE as PAR files from NWDS. For several projects i have similar requirements (e.g. read customers information etc.), so I generated a "base" projec

  • How do I get rid of  a downloaded pdf file?

    I have a downloaded pdf file sitting on my desktop which I am unable to move or drag to the trash. How do I get rid of it?

  • Changing page order?

    I read in a few posts that you can just drag the page to change the order under "view thumbnails". It's not working for me. I'm not exactly sure what I am doing wrong... Can anyone help me out with how to move a page in a different place?

  • MobileMe not is not sync with iCal

    i desperatly need help. My iCal information is stored in the MobileMe clud and in my iPod Touch. But when i make syncronisation it just doesent appear in my iCal on mi iMac. I already deleted all the ical forlders and done some testings but have not