I cannot connect to printer with bluetooth with i phone office jet 150

i cannot connect using bluetooth from ipad or iphone

Hi,
Apple's iOS does not support printing over bluetooth, it only allow printing through a wireless network connection. (802.11), as well the Officejet Mobile 150 is not an AirPrint printer:
NOTE:Apple iPads and iPhones do not currently support Bluetooth printing. To print from your Apple mobile device, you can use HP's wireless printing accessory (sold separately). Go to Installing the HP 1200w NFC/Wireless Mobile Print Accessory to learn more.For additional information, go to HP Printer Does Not Support HP's Mobile Printing Solutions .
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03137985&lc=en&product=4231413&tmp...
You may check the HP 1200w NFC/Wireless Mobile Print Accessory which adds wireless and AirPrint capabilities to the Officejet Mobile 150:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04127987&lc=en&cc=us&dlc=en&product=4231413
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HT1212 my ipad just died.  When i hook up to my computer on itunes it says cannot connect because it is locked with a passcode.  i know my passcode but nothing is coming on, the screen is just blank and it is was fully charged

    My ipad will not turn on.  It was fully charged before it just died and would not turn back on.  When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode.  I know my passcode but the screen is just black, no power, so I cannot enter a pass code.

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • Replaced my iphone4 with a new iphone4 because didn't connect to wifi or bluetooth. New phone connects to wifi, not bluetooth. How to fix?

    I replaced my iphone4 with a new iphone4 because didn't connect to wifi or bluetooth. New phone connects to wifi, not bluetooth. How to fix?

    Here are the supported bluetooth profiles http://support.apple.com/kb/ht3647
    You can't connect to other iphones/ipads/smartphone via bluetooth.

  • IPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    Try putting it in DFU mode and then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • DexterM - Printer connected wireless but Notebook cannot connect to printer?

    Hi all,
    I will be a brief and clear as possible. I really hope someone can help! thanks in advance.
    DexterM, if your still arond I think maybe you would be familiar with this type of thing. I will be as concise as possible.
    I incorrectly removed some HP folders in an effort to remove the bloatware. (shop and participation program etc).
    Anyway, I damaged my install because Solution Center disappeared! I needed it to scan multiple page PDF docs.
    I tried to uninstall and re-install the Full Software package (my printer is B110a) 10s of times. Each time the Installer showed that 'Solution center' is already installed. It was not installed.
    Eventually after days of trying to fix this, I took the drastic measure of remving some HP keys from the registry. Not randomly of course, but from a solution post on this board. I only removed about 4 HP keys. I was very careful not to remove any Windows ones. (I se Win7).
    So.. Solution center then installed. Hooray! Everything seemed perfect. EXCEPT....
    I had removed 2 keys related to the Network. Something like NET HPz12 and something similar. 
    Now when I tried to connect my printer wirelessly (using the USB to wireless process) it cold not find any wifi networks even though there were several in the vicinity.
    I found a solution on this forum which involved right clicking on the network.msi file and choosing uninstall, then re-installing it. This did the trick! now when I ran the "USB to Wireless" process it instantly found my wireless "your PC is connected to SSID blah blah blah, is this correct". Yes. It continued the network diagnostic but always failed at this point.
    I think because some service or reg key is missing the computer cannot commnicate directly with the printer, but it can see it at http://192.18.1.2 etc via browser. so all is connected properly, but something is preventing the laptop from commnicating with the printer. 
    So to recap.
    Laptop works perfectly with printer via USB.
    Printer is connected to my wireless without isse. I can see it at http://192.168.1.2 etc
    Laptop cannot connect to printer though, and fails everytime I run the 'usb to wireless' process.
    I suspect one of the NET keys I deleted frmo the reg is to blame? Or some missing windows service?
    The network diagnostic utility says "network software missing, please reinstall or fix and try again". I have uninstalled and reinstalled 10s of times now. It's not putting back no the required network service/key thats missing.
    Argh. please can anyone help. Someone must have been here before? I have a screen shot too of the 'USB to wireless' process failing. It shows the connection is there, but something is not right.
    image 0 - the 'usb to wireless process' picks up my wireless without any problem. ok
    image 1 - during the 'running diagnostic on network' part of the process it fails
    image 2 - not much to go on here. I reinstalled and uninstalled 4 or 5 times already. same thing. 

    Nobody? Im really stuck here... Been onto support 3 times and they cannot help. I need someone with expert skills who will understand which windows service or driver or key is preventing the notebook from talking to the printer even though both are on the same network successfully. No AV or FW on the network either.

  • 2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

    Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
    printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
    connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

    By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
    Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
    or in the clients. More details can be found this page: Cannot
    connect to printer, Access denied -
    http://www.chicagotech.net/server/print3.htm
    Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.howtonetworking.com

  • Windows cannot connect to printer. 0x00...2

    I work in a Domain environment where we have hundreds of printers on about a Dozen Print Servers. Some are 2003 and others are 2008. The Server I'm working with is 2003. The client work stations are Windows 7. We have several printers not mapping to the
    designated clients. All installation of printers are controlled via scripts through GPO and based on what security group they belong in. 
    As far as I can see the computers are in the proper AD security group. But as students and staff log into the desktops, none of the printers show up. And when I try to manually connect the printer by going to the UNC path \\XXX-XX\printer_name it gives me
    the "Windows cannot connect to printer"..... with a code of 0x00...2 (there are a bunch of zeros in there). 
    Now we have other printers that are mapped and are available to everyone. Its just those that are connected via a security group. So if a machine is in Room 123 and in the 123 group, they should get a color printer and a B&W printer for that room. 
    For some reason the color printer is not showing up, but the B&W is. Outside that group, other teachers can connect via their laptop, or other desktop. But All the computers that the students use, cannot map the printer. 
    I've tried the registry fix to clear drivers, I've renamed the "3" folder and that didn't work. I've tried applying Hotfixes but the ones I was given stated that they were designed for my version of windows. Even though the fix was for Windows
    7. 
    I'm getting frustrated. Simple Printer 101 tricks aren't working. I think this is a level up higher and could be script or Domain related. Any thoughts?
    Thanks,
    James C. August II
    A+, Net+ Certified

    Error 2 is File not found.
    C:\>winerror 0x00000002
         2 ERROR_FILE_NOT_FOUND <--> 0xc000000e STATUS_NO_SUCH_DEVICE
         2 ERROR_FILE_NOT_FOUND <--> 0xc000000f STATUS_NO_SUCH_FILE
         2 ERROR_FILE_NOT_FOUND <--> 0xc0000034 STATUS_OBJECT_NAME_NOT_FOUND
    If the printer driver uses color profiles, make sure the color profile files are installed on the machine.  Including the print driver name and where you got the driver might be useful.
    Alan Morris formerly with Windows Printing Team

  • HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

    I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

    You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
    Good luck & happy computing!

  • How thick paper can the 'Office Jet 150 Mobile' handle for printing and scanning?

    I would like to know how thcik paper it's possible to use on the Office jet 150 Mobile - all in one printer?

    Ulrika wrote:
    I would like to know how thcik paper it's possible to use on the Office jet 150 Mobile - all in one printer?
    From the specifications:
    64 to 90 g/m2 (16 to 24 lb bond)
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How do I print single envelopes on my hp office jet Pro 8600 premium

    How do I print single evelopes on my hp  office jet Pro 8600 premium

    Hi B4567
    I understand you would like to know how to print a single envelope.
    I have provided a document on how to print envelopes. There is also a video included.
    You could use the one tray for envelopes and the other one for paper so you don't have to keep pulling out the stack of paper to print one envelope all the time.
    Hope that helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Cannot connect to printer hosted on a Win2012 Server with a Windows 7-64bit client (Error 0x00004005)

    I have a Windows 2012 Server set up offering print services to our network, there are about 20 printers set up all deployed via group policy. Recently, on one of our Windows 7 machines I am finding that I an unable to connect to one of the printers shared
    on the print server while other clients seem to be able to connect to the same printer with no problem. Also, the printer used to work just fine from this same Windows 7 machine.
    To test things further I logged onto the Win7 machine as the domain administrator, connected to the print server and double clicked on the printer to attempt to install it manually (rather than letting Group Policy do it). When I do so I receive the following
    message, "Windows cannot connect to the printer. Operation failed with error 0x00004005.
    I have done some searching but the only references I am finding to this particular error message involved users attempting to connect to a printer hosted on a 32-bit version of Windows from a 64-bit client. However, in my case both the server and client
    are 64-bit.
    Can any one help me troubleshoot this 0x00004005 error?
    Thank you.

    Sorry for the delay. I just went and attempted to add the printer again on the client machine, the installation failed just as before, no log entries were recorded in the PrintService Admin log and the Operational log was disabled, I enabled it and added
    the printer again. This time when the installation failed seven log entries appeared in the Operational log, all of them informational, no errors or warnings, the events are as follows...
    1. Event 300, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was created. No user action is required.
    2. Event 304, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was resumed. No user action is required.
    3. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
    4. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
    5. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} will be deleted. No user action is required.
    6. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D},8 will be deleted. No user action is required.
    7. Event 301, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was deleted, and users will no longer be able to print to this printer. No user action is required.
    There are a couple log entries in the Admin log indicating an error occurred, those errors occurred yesterday afternoon at 4:30pm or so. I did not try to add the printer then so I don't know if these are related to this particular problem or not. This same
    entry appeared twice at exactly the same time...
    The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\PrintConfig.dll, error code 0xc1. See the event user data for context information.
    As a temporary workaround I installed the drivers for that printer directly on the Windows 7 client machine and that works fine, however this is less than ideal because I had set up group policy to only install that printer for specific users, not for everyone.

  • HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

    cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
    help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Cannot connect to Lacie Ed Mini with new Airport Extreme BS

    I've just bought a new AE and cannot connect to my Ed Mini when its connected to an ethernet port when using an XP PC. I'm using the AE in bridged mode (temporarily) but I'm not sure if this is preventing being able to connect to the drive or not. Help!! any ideas? thanks in advance.
    Windows XP Pro

    Thanks Stuart, nice set up!
    I listened to your advice and it worked!!!! They are both synced up, however somewhere in the setting I seem to get some problems.
    I can use both Desktop(LAN only) and Imac (wireless only) to play Airtunes however I realized that the Imac is surfing the net using the Airport Express rather than the Airport Extreme. Hence a very slow surfing experience.
    I went back into the Airport Express and set to join an existing network and tried using a different name, so the Imac won't use the Express to do the surfing. Upon resetting the Express, the green light is active which is good news but now I cannot play Airtunes on both my machines. So I guess even with the green light, the Extreme and Express are not linked up. Am I right?
    Furthermore I can get my Imac to use the Extreme to surf the net which is ideal but have the problem where I cannot play Airtunes with Express. I think it's because Express is not linked with my Extreme base station.
    What I want is for both machines to surf the net at normal fast speed using Extreme, and for Itunes to connect to Express via Extreme and play my music using Airtunes so I can get great music out on my HiFi.
    Any solutions, or settings I need to do? Much appreciated for all feedback from members here.
    Thanks!

  • Lumia 820 cannot connect to PC via Bluetooth

    Hi there. I have recently bought a new Lumia 820, which is a great phone, except that I cannot connect the Lumia to my PC (win 7) via Bluetooth. I have been using phones with bluetooth for a long time, so this is not my first time. I can see my pc in the list, but when i click "connect", the phone is connected to the pc for like one second and then the connection breaks up. Transfering a single file by clicking "send" and then "bluetooth" is no problem, but the connecting directly between the pc and the phone via bluetooth instead of usb cable is no success. Can anybody help me out here please? Thank you!
    Solved!
    Go to Solution.

    A continuous data connection is not supported. In all fairness it's kind of like trying to fill a tank using a thimble.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Photosmart B209a setup cannot connect to printer wirelessly

    I've had a Photosmart b209a printer for about 2 years and used it with no problem.  Couple of weeks ago upgraded to windows 8.1 and then neither of my two printers would print.  Long story short, I restored the computer back to windows 8 (which was factory installed) and can now print on my laser printer but not the Photosmart.  I have tried and retried installation and setup and always get the same problem:  The IP address is visible on the router's list of network devices, it is visible on the printer's front panel in wireless settings, and when installing the software with USB it can see the IP address when trying to setup wireless connection.  Then, the setup says it cannot connect to the printer.  It sees the printer, attempts to contact the IP address, returns the following:
    "Your computer is unable to communicate with your printer at 192.168.1.114. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
    Your PC can not communicate with your printer at address 192.168.1.114. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
    Obviously, the PC and router are turned on and connected.  I even went to the security software and turned off the firewall AND created a new UDP port 427 and still no luck.  What has happened to my printer???

    Hey sue_M,
    The first step that I would suggest, would be to run the HP Print and Scan Doctor. I have included the document 'Try the HP Print and Scan Doctor for Windows'. This will walk you through the download, as well how to use the tool.
    Now to confirm a couple of questions with you.
    1. What firewall do you use? (ie. Norton, Windows, MacAfee)
    2. Do you just have the one firewall, or multiple firewalls?
    3. For the UDP 427 port, have you made sure that this port is open in your router firewall?
    Looking forward to your answers.
    I worked on behalf of HP

Maybe you are looking for