I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help
I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Similar Messages
-
I can't get in to setup internet connection because the message(the ipod touch hasn't been backed up in 11 weeks.....) is blocking me from going any further.Please help?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I have a MBP Retina LCD (resolution 2880x1800) and in the office I use it with a Monitor Sony LMD-2450W connected by VGA. After installing 10.9.2 the resolution in the monitor has been downsized to 4:3 (and 1280x960) instead of its 16:9 display. Anyone know how can I change the resolution manually?
Display shows only 3 different resolution if I choose "scaled" but none use the full area of the monitor.
Thank you
MarcoThis has been an ongoing problem with external monitors that predates 10.9.2. I wrote various tips on different methods here, though the best is probably the hot corner one:
http://applehelpwriter.com/2014/01/25/how-to-correct-the-external-monitor-resolu tion/
(note: this links to my own personal website and is not endorsed by apple in anyway) -
Hi I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error cannot restore this ipod please help thanks
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
I have spent so much time trying to restore my I phone 3 as aple sent the link and have logged on connected the phone to itunes but cant go any further as it keeps asking for password any ideas on this problem?
Hello Knoeller13
The way to get passed the passcode is to restore your iPhone. Follow the steps in the article below to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up within iTunes or iCloud, you can put the back up back on and the passcode does not come back.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G. -
i have switch my iphone 3gs on and the screen is very enlarged and can not use slider bar and go any further on the phone, i have taken sim out and re inserted it and no change, can you help please
http://support.apple.com/kb/TS3129
-
My iphone some how got put in recovery mode, and i hadnt updated it yet and i keep trying to recover it, but it makes me update it first and amost to half way done it gets interrupted..is there any possible way to skip the update? i need my phone and i dont know what to do! Pleeease help me!
There is no way to skip.
Disable any security software on the computer and update the device. -
I am using ethernet and am using a Linksys SE1500 5- port fast etherner switch, i cant seem to sign in on the apple for anything although I have accounts set up in itunes/apple and netflix . Any suggestions PLEASE have spent 3 hours trying everything I can think of. Any help will be appreciated!
I have a linksys router but it isn't strong enough to get to this computer, so we are using ethernet.
Thank you
ColleenWelcome to the Apple Community.
Are you getting any messages about date and time.
Have you tried restarting the Apple TV by removing ALL the cables for 30 seconds.
Are you connected to the network correctly. -
I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?
Try Handbrake (http://handbrake.fr/), it's good and free
-
I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296 -
I have just bought iPhone 3gs in Sept.11. I was trying to update the software using itunes but it is showing Error "-3259" saying connection timeout. Please help.
Did you already check your securit software settings? iTunes has to contact Apple during the update process.
See this article: iTunes for Windows: Troubleshooting security software issues -
I recently started receiving the following iTunes error message when I attempt to update the software on my iPad or iPhone: "The iTunes library file cannot be saved. You have exceeded your storage quota on the disk you are attempting to use."
Any ideas what I need to do? The software won't update on my iPad, and I need to update through iTunes, as my iPad does not have enough free space to use the OTA service.You need to free up space on your boot drive.
(I am going to ask the mods move this to the MacBook Pro forum.) -
HT1918 cannot change my email account that the iTunes store uses for my login
cannot change my email account that the iTunes store uses for my login
What happens when you try to change it ? You should be able to change by logging into your account on this page : http://appleid.apple.com
Or via the Store > View Account menu option on your computer's iTunes
You might then need to log out of your account on any devices (iPad, iPhone, IPod Touch) that you have and then log back in so as to 'refresh' the account on them. -
I can't sign into the itunes store using the 3G network?
I can't sign into the itunes store using the 3G network?
I keep getting the error "Can't connect to the iTunes Store"
This also makes it impossible for me to use itunes match with the 3G network.I've got this as well and it seems to have affected only the Music and Home pages - do a search in the search bar and you will get to the films etc. Looks like somone goofed! If anyone from Apple checks this out, mine is the UK store. Home page and Music pages only affected.
-
When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store. An unknown error occurred (-54) Make sure your network connection is active and try again."
I've had the same problem for a month and yet I still cant get iTunes to work, I've heard different solutions but none have worked for me
This may or may not work for you but its worth a try even though it didnt seem to work for me, Good Luck!
Control Panel
Internet Options
Connections Tab
Click LAN Settings
Uncheck "Use A Proxy Server"
Maybe you are looking for
-
Can we do a recording for ABZON transaction?
Hi, We are using transaction ABZON for creating 'new asset' for uploading data using LSMW recording method. We are getting an error "leave transaction not possible for batch input" when we are try to upload more than one record from the file. The LSM
-
Java stored proc deploy problem
I get follow error,when I deploy Java stored proc with JDeveloper3.2. Errors: *** Errors occurred while loading the archive into 8i JVM *** How can i do? Thanks a lot!!
-
My MacBook Air wont remember network settings.
Works fine until I put it to sleep and then when I open it up it starts looking for a network.
-
Hello, we are building a CPM. We have inserted prerspectives, strategies, objectives, measures... We have leveled the "Status & score" with values. But when we are looking in the graphics, the score always is 0. Where can I convert that 0 to another
-
I was trying to set JPanel with two inner components (JTextField and JLabel) as header renderer. When I put this component to JFrame text field is editable, but when it appears in my custom table header it is disabled or not focusable, that part I co