I did some commands in CMD now firefox wont work at all!

So my problem was I couldn't ping IP addresses. So I looked up a tutorial I followed this EXACT thing and now I can't connect firefox everything says its connecting but it never loads no error message nothing. Here is exactly what I did that now gave me this problem.
:: resets the ipv4 interface
netsh interface ip reset
:: flush and reregister DNs
ipconfig flushdns
net stop dnscache
net start dnscache
ipconfig /registerdns
:: clear persistent routes
route print -f
:: start / restart mrxdav
net stop netbt
net stop mrxdav 2>nul
net start mrxdav
net start netbt
:: clean the arpcache
arp -a -d
:: I might have the order of the switches backwards and the order matters, so if that doesnt do anything put the -d before the -a
:: make sure winhttp and webclient services are running (this is a mystery to me / neither appear necessary, but both have fixed my problem on various occasions)
net start webclient
net start winhttp

Best would be to ask advice at a Windows oriented forum if you have broken your internet connection.
* http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
* http://windowssecrets.com/forums/ Windows Secrets Lounge

Similar Messages

  • TS1398 My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. What can I do to fix it?

    My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. Again it just gives me a loading sign and the wifi symbol wont come up.

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • Microsoft has automatically updated itself on my pc and now firefox wont work

    microsoft has automatically updated itself on my pc and now firefox wont work

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Itunes asks to update my brand new ipod touch.. I do and now it wont work at all!!!

    just got my brand new ipod touch ... working good then itunes wants to update so I do now my ipod doesnt work at all! all I get is the apple and a line on face and wont even turn off!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT5381 i did a software update and now mail wont open at all

    Help......my mail app is coming up with an error "You can't use this version of Mail with this version of Mac OS X".  Can I uninstall the update?

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • I have a dx1210 the screen is blank as I switched it to run thru my tv but now it wont work at all

    How do I reset my computer to run on its own (ie not thru tv) I switched over so the screen runs thru tv but now the screen is completely blank so I can't turn computer on to reset settings. The windows logo comes up when I turn monitor on but then nothing it just goes blank. Nothing has worked please help. Thanks.

    I switched over so the screen runs thru tv
    I'm confused! According to the specs and the manual (attached), the HDMI port is for incoming video/audio. How could you send the screen to a TV? Please explain in detail what you did.
    To find the bitness of Windows, click System in Control Panel. It's the System type.
    -Jerry
    Attachments:
    DX1210-userguide.pdf ‏8449 KB

  • My IPad froze so I turned it off and now it wont work at all!

    Okay so pretty much the screen went dim out of no where and froze so I hit the sleep/wake button and home button and reset the IPad. But here's the thing, it won't turn on now. The IPad was at about 75% battery which is why I am so confused. If anyone has anything that could help me please let me know.

    Good day vortexofpandas,
    If you are having an issue with your iPad not starting up, you may want to troubleshoot using the steps in this article -
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    In particular the section titled If your device gets stuck during startup. 
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • HT4623 have got an 3gs unlocked went to do the latest software update to which it ran through only to say at the end had to restore phone due to error have done this and now it wont work at all say please provide a valid carrier sim to activate wont have

    need help with 3gs which has decided to go mad really thanks

    Sounds like your phone was hacked to unlock. Restoring the phone put it back to Apple specs for that phone. You will need to find out which carrier it is locked to and see if you qualify for unlocking.

  • HT5261 my itunes updated last week and now it wont work at all.

    it keeps telling me it was installed wrong.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Firefox would not connect after upgrade. Did system restore (XP) and not firefox wont even start

    Firefox would not connect after upgrade from verion 6 to version 7. Did system restore (XP) and now firefox wont even start

    Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
    If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
    * [[Fix problems connecting to websites after updating Firefox]]
    * [[Configure firewalls so that Firefox can access the Internet]]
    A couple of other suggestions:
    (1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
    (2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]]

  • I updated my iphone to the ios6 and now it wont work.

    i updated my iphone to the ios6... and now it wont work at all.
    it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
    someone please help...

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

  • On my Iphone, i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.

    i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.

    What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Once firefox 4.o was installed, full screen video produced white screen. Had to exit and and restart video. Using a mac os 10.5. Disabling hardware acceleration did not fix. went back to firefox 3.6 and all is ok. Any help would be appreciated.

    Once firefox 4.o was installed, when switching to full screen while watching any internet video produced a white screen but audio still playing. Switching back to small screen has a still video but audio still going. Had to exit and and restart video or open a blank new new tab then delete it and then small screen video would play. Using a mac os 10.5. Disabling hardware acceleration did not fix. went back to firefox 3.6 and all is ok. Any help would be appreciated.

    Your hardware was never designed to run that old a version of OS X, it's best to update the application or find another application that is more up to date. Installing Leopard simply will not work on your system.

Maybe you are looking for

  • Delete CSV file from server using php

    Hi all, I've got a link in a site I'm creating that I would like to trigger php to delete a CSV file that is held on the server. Any one have any ideas? Cheers T

  • RDP to Windows 8 or 8.1 issues - admin or console connection not working

    Hi, I have a number of issues when connecting to my Win8 Pro (and now Win8.1 Pro) machine via RDP. First off, I know that most of the issues I am about to list below should technically be resolved if I connect to the console or admin session of my ma

  • Best solutions for my imac?

    Ok so, recently my imac has been messing about. its decided it doesnt want to read any discs at all. Luckily, i had to have it sent into apple due to the recall of the seagate harddrives, and so i asked them to check my disc drive for me, to see if i

  • Prob with FM ----- ME_DIRECT_INPUT_SOURCE_LIST, Urgent

    Hi , Iam using the Fm  "ME_DIRECT_INPUT_SOURCE_LIST" to update a Source List for the TCODE : ME01. I have passed the parameters : I_MATNR      I_WERKS      and T_EORD. And even sy-subrc  is ZERO after Fm execution, the Source list is not getting Upda

  • New photo album

    hey everyone, i was wondering if anyone knew how to create a new album on the iphone 3g? thanks help is appreciated!