I have a canon xl1 and cant seem to import my video to FCPX. Any ideas?
Ive tried compressor, idvd, quiktime, need help. Thanks so much!
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W88034J5X86
Hardware UUID: 00000000-0000-1000-8000-001EC2068236
Similar Messages
-
HELLO EVERYONE! I have a canon xl1 and cant seem to import the video to FCPX. HELP IS APPRECIATED!
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W88034J5X86
Hardware UUID: 00000000-0000-1000-8000-001EC2068236 -
Metastream3 is a plug in that is used for a number of online games the kids try to use. They now get the message the plug in has been disabled.
When I go to the Add Ons/ Plugins- the 'enabe part of the menue is disabled.Remove "Viewpoint media player" in Add/Remove (control panel)
-
I have over 1000 songs on an old computer and I want to copy them to a new one - I have a hard drive but it seems to only copy my purchased songs - any ideas?
Hi Le Etta,
Welcome to Apple Support Communities!
Take a look at the article below, it provides details and instructions for multiple ways of moving the music from an old computer to a new one.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Method
Considerations
Home Sharing
The easiest option, as long as your new computer is already connected to the Internet.
External drive
Requires additional hardware but backs up your iTunes library.
Transferring purchases
Fastest, but only moves the content you purchased from the iTunes Store. Also requires an iPhone, iPad, or iPod with the content on it.
Windows Migration Assistant
Works best for migrating from an old PC to a new Mac, and transfers more than iTunes.
-Jason -
I have an older MAC and need a printer for 10.8.5? Any ideas? thanks
I have an older MAC and need a printer for 10.8.5? Any ideas? thanks
Without a disc, I'd create a new administrator id and delete the old id. Erase any folders you might have created outside your home folder. Use disk utility to erase free space. One pass should be good enough for a home computer.
Robert -
I set up a new ipad2 and conncected it to my home wi-fi network. However, everytime I turn the devise off I have to go in and reconnect. My other ipad reconnects automatically. Any idea what I need to do?
Did you already try to reset the iPad by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data doing a reset.
If this does not work, reset the network settings in Settings/General/Reset.
If still not luck, set it up as new device, described in this article:
How to back up your data and set up as a new device -
I cant seem to the get the previous pictures off of the other device, shouldn't they be able to transfer throught the cloud
If you had Photo Stream enabled on the 4S that was lost, turning on Photo Stream with your iCloud account settings on your new iOS device should download all photos currently available in your iCloud Photo Stream.
-
When I use netflix thru apple tv, and want to buy a movie or tv show, it keeps coming up with the message to go to iStore online and update my payment information. I have done it over and over again and even deleated the info and re entered it. Still keeps coming up with the same message. Any ideas??
Movies are not bought via Netflix, then are rented or borrowed.
For iTunes account issues, contact iTunes Customer Support. -
hi, i have an andriod galaxy 10.1 tablet and am having trouble downloading itunes, it says thanks for downloading, but dosent give me an option to run it. is it possible to have itunes on an andriod device?? thanks in advance
No, you cannot run iTunes on an Android device, it runs on Windows or a Mac only.
-
my i phone pass code is locked and i cannot get it to come back on. thanks for any help
You can restore the iPhone from backup on the last computer your iPhone synced with, this will allow you to reset the passcode http://support.apple.com/kb/HT1414. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore as a new device, all data on the phone will be erased http://support.apple.com/kb/HT1808.
-
Im trying to input a DC voltate on channel 1. So i hook up +5 to the channel 1 analog input, and hook up ground to the AIGND. When i measure it in continous time, i get a reading of -1.3 V, when i move the cable connecting the NI board and the DAQ, the voltage jumps around. I even tried connecting AIGND straight to channel 1 analog input, and read a voltage of 2.3, but its not stable, it jumps around a lot. What is this problem. please help
This is going to depend on how you have your DAQ board configured. In differential mode, the positive input is channel 0, but the negative input is channel 8 (for 8 differential/16 single ended MIO boards. Channel 32 is - on 32 differential/64 single ended MIO boards). (Similarly, chan 1 (+) and chan 9 (-) are the next channels, etc).
For single ended mode, chan 0 is the +, and AIGND is the -.
I suspect you have your board in differential mode, and your - is not connected to the correct pin; therefore, your voltage is floating.
Mark -
iTunes is consistently not responding. What is the problem?
Hey Phillyboysf1,
Welcome to Apple Support Communities.
It sounds like there’s an intermittent issue that’s causing iTunes to stop responding on your Mac. Take a look at the article linked below, it describes a similar issue and will walk you through some great isolation and troubleshooting suggestions.
iTunes: Troubleshooting issues with third-party iTunes plug-ins - Apple Support
Ciao,
-Jason -
Hi my itunes library is constantly disappearing, I really don't know what is wrong. It keep happening everytime I turn my laptop off, I thought I had solved the problem the other week however it has started back up again. I have a Sony Vaio laptop and have read on the discussions that this can occur but all the solutions I have read haven't seemed to solve it. Anybody else got an idea? I would be really grateful for the help!
See this post. Seems that AVG is the most likely cause. They are promising a patch tomorrow.
tt2 -
I have just purchased an iPhone 6 and donwloaded IOS 8.1. I cannot get the phone to download the phone contacts into my Mercedes benz incur phone system. Have rest the network. Tried several time but still no joy. My previous Iphone 4s worked fine. Just a bit frustrated. Anyone assist?
I have the same problem on my Lincoln. My Iphone5 worked just fine until I loaded 8.1.
-
I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks
Maybe you are looking for
-
Deployed application can't see the JDBC connection
Hi I made an ADF application using oracle JDeveloper 11g and it ran successfully from the JDeveloper I deployed it to Weblogic 10.3 and it successfully deployed But when i Opened the deployed application's URL the page's lay out is only what i c (onl
-
ITunesU usage report - unknown users account
I just got my first usage report and noticed these unfamiliar accounts. Can someone describe what these accounts are? [email protected] 42@[school].edu
-
Can someone help me with the correct settings for the E71 for me to access my work server: we use a doman for mobile email: mobile.company.com, we have an exchange server which has a name or an IP address. Also we can access using www.company.com/exc
-
Trouble booting to WDS server to deploy or capture image
Hello, we have an existing WDS server running Server 2008 R2 with SP1. I am having trouble getting a Surface Pro 3 to boot to the WDS (even after creating updated deploy and capture boot images). I can get the Surface to PXE boot, and I am able to
-
Cannot open .jsp files from browser
Hi! I cannot open .jsp files form the browser.(Some sample jsp files I downloaded open without any problem, only the ones I added, don't- they're in the same directory, with their java files in the web-inf folder.) I have jdk1.2.2,jswdk1.0.1,jsse1.0.