I have a Mac and a request to update to FireFix 7.0. I hit install and it just runs and runs trying to connect to server. How do I get it to update?

Every time I try to install Firefox 7.0 on my MAC desktop it just runs endlessly trying to connect to Firefox server

Just download the disk image and install Firefox manually. That works every time.
* http://www.mozilla.com/en-US/firefox/all.html

Similar Messages

Have new Mac and am trying to connect to airport.

The problem that I am having is that I cannot remember my password. Have all other information, but for some reason the password I believe to be correct must not be. Any suggestions? db

If you are talking about the password on the airport you can do a master system reset:
http://support.apple.com/kb/ht3728

I am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

i am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

Hi there
I think in this case, you may be best to speak with Microsoft about this, as it does seem like an issue with Office, and not your Mac.
Follow this link, to find your local Microsoft Support contact number.
Or perhaps create a new topic in the Microsoft Support Communities
Good luck

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

If I have a document in Microsoft word but now have on the Mac and the format is completely off. How can I get this to be right on the mac

I need Help with my Mac. We have a document that is on a thumb drive that was typed on a dell PC. We have a Mac at home and need to print the document. How do I get it to look the same as when on Microsoft word?

try NeoOffice or OpenOffice. I don't know what apps you have. Pages might open it or TextEdit, but, again, I don't know. All I can do is suggest. If you are really a stickler for format, if you're on that dell PC again, try saving the document as a .pdf and then putting it on the thumb drive.
JB

I have a mac osx tiger. The camera light is not showing on. Can no longer receive or send video feed for skype calls. How can I get my camera back to working? Thanks Madhu

I have a mac os x tiger. The camera light is not showing as on. I can no longer receive or send video feed. How can I set my camera back to on?
Thanks Madhu

Troubleshooting the iSight camera:
http://support.apple.com/kb/HT2090
and
http://support.apple.com/kb/HT2090

I have 2 websites and 1 IP address for my server, how do I set the DNS up?

I am having trouble following the boards and the Server Admin instructions to make sure I can activate a website.
IP address for the Snow Leopard Server on a mac mini
Server Settings for Web has the 2 domain names listed pointing to the same IP address and same port 80.
How do I point the DNS correctly to the domain I want to respond? www.ziggythewinegal.com
If you put the IP address in a browser, it returns the default domain which is just the apache/osx server page. 64.142.85.71
If you put the first domain name in a browswer, it does the same. www.JoelQuigley.com
How do I setup the DNS to www.ziggythewinegal.com which is in the folder WebServer>ziggy>index.php ?

64.142.85.71 has an existing public DNS translation, so you'll be adding DNS CNAME (alias) records for the each of the additional hosts into your public DNS at WorldNIC DNS servers.
Your local host either isn't running DNS, or it's running local DNS. If it's running local DNS, then hopefully it's not running with the same domain name as your public DNS services; that you have an external DNS zone and an internal DNS zone, with an external DNS domain and an internal domain name. If you are running DNS locally and are using the same domain name for internal and external DNS servers, then you'll also need to add the translation for the new web sites into your local DNS server configuration.
Once the translation is added, add - as John Lockwood indicates - Sites into your web server.
The numbers of folders can vary. Different sites may or may not be in the same folder, depending on what you're doing. Multiple ttraditional static HTML web sites are probably stored in separate folders. A single site with several names can be in the same folder. A web content management system (CMS) can be stored in one folder.
If you have a firewall here (and you should), then you may need some additional steps. Particularly if you're running NAT, and don't already have rules and port-forwarding enabled on the server. Given it appears you're using mail with this server, there are likely some rules in place, though you'll need to confirm that port 80 TCP and possibly port 443 TCP are (also) being forwarded for your web services.
Here is a write-up on adding what Apple calls Sites and what Apache calls virtual hosts.

Mac and windows clients losing connection to Server 2012 Namespace

I am running Windows 2012 Standard edition on two HP Servers. Both are fully patched O/S's and all HP system updates are installed. Each is running a 10 Gbit NIC to a Cisco 2960 Switch fully updated. Both Network shares are on HP external Drive bays connected
through a Smart Array P822 card
All users connect to the primary server (secondary server configured not to take referrals at this time)
My Mac clients running OS X 10.9.1 connect using smb and the namespace. When the designers come in they usually have to reboot in order to connect to their server shares. We discovered today that if they change the IP address the reboot is not needed. We
have an archive server running on a Synology NAS. Their connection to the Synology is not impacted.
The windows machines will lose connection at random and not everyone at once. Usually no more than twice in a week. The fix is either a reboot or an IP change, sometimes both. None of the machines go to sleep or hibernate. All machines are fully patched
with windows updates, and HP system updates.
We run Avast on both the Mac's and PC's if this makes a difference.
Any thoughts?
thanks

thanks Shaon,,
1) IP address before is within our DHCP scope of 192..168.0.51/200. When we set to static we set it to 192.168.0.16/20. We then reset back to DHCP.
2) The error message is that it can not find the server if I try to map it.
3) Clients can still access by IP address and FQDN
We have disabled Avast on a few machines to see if it will make a difference. We then ran into the issue on a machine without Avast installed.
We did notice that our DNS server was not deleting old entries and we found many duplicate entries. We set it to scavenge and then I went through and deleted old records. Not sure if this would cause a problem or not.
thanks again for your help!

My ipods are no longer recognized after I installed my Iphone I have 2 ipods that I have music on and still want to use them so how do I get the computer to recognize the ipods again?

I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?

Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone? Doesn't it use to the same iTunes installation you already used with the iPods?
So, I guess my question is, what changed on the computer when you started using the iPhone?
What happens now when you connect the iPod? Is the iPod still seen in Windows device manager?

I have a mac, and am trying to install lightroom 3.6, everything says it has installed ok, but when trying to open I get this message...An error occurred when attempting to change modules.

anybody have any idea?

https://forums.adobe.com/search.jspa?q=error+occurred+when+attempting+to+change+modules&pl ace=%2Fplaces%2F1383621&depth=…

I have win 7 and am trying to connect to an h-p color laserjet 3550 on our net.

Win update says no drivers available for connecting to my 3550 what can I do without a disk?

If you can not get the driver in the list with Add a Printer and selecting Windows Update then download the appropriate 32 bit or 64 bit Vista driver from HP here. Run this program, which will unpack the driver to a "C:\HP CLJ3550" directory. Now go to the Printers folder, Add a Printer, choose the appropriate port, Have Disk, and Browse to "C:\HP CLJ3550" and select hpcp3550w.inf.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have Uverse 5031NV and am trying to connect wireless HP 4620 printer.

I have the UVerse 5031NV router. When I follow the setup instructions to set up HP 4620 printer, it can either set up by push button, or PIN. I don't know where the WPS button is on the router, nor how to input the given PIN from the printer. Or is there another way to connect wirelessly the printer to router?

Hi IKnowIndigo,
There are a few possible causes of the error. Generally speaking, you want to confirm that the network IP Address settings, Send Function Setting Tool activation, and Send-to-Email settings are all configured properly.
Please note that if in an office setting, we recommend that your IT Department/Network Administrator setup your scanning to email feature because we will not know information like your port numbers and so on.
However, whether your laser product is an office setting or setup on a personal network of your own, it is recommended to contact our technical support group to isolate the cause. At that time, it will be helpful to have initial information such as your operating system and version; if you have an on site e-mail server such as an MS Exchange server or a Domino server; or, if you are using an off-site email server such as Yahoo or Gmail.
Please feel free to contact us and we will be glad to help.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.

I have two Macs and I am using the same Apple ID on both. All of my info, history etc is showing up on both. How do I turn this off?

I have two Macs and I am using the same Apple ID on both. All of my info, history etc is showing up on both. How do I turn this off?

You likely have iCloud turned on in at least Safari. If you don't want Safari to sync between these devices turn one of them off. System Preferences - iCloud - Safari (uncheck the box)

I have a Mac and a request to update to FireFix 7.0. I hit install and it just runs and runs trying to connect to server. How do I get it to update?

Similar Messages

Maybe you are looking for