I have a new PC w/ Win7 and Ipod is not recognized. I think I need to restore the Ipod but am unable to do so. thanks to any /all who can assist.

I have a new PC w/ Win7 and Ipod is not recognized. I think I need to restore the Ipod but am unable to do so. thanks to any /all who can assist.

Hello kevin
Check out the article below to guide you to the proper article to get your iPod shuffle to show up. You will need to see if it shows up on your computer as a device in My Computer section in Windows Explorer. Then it will help you pick the right one.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Regards,
-Norm G.

Similar Messages

  • I had to pay to have Apple replace my iPod Nano (6th gen.). I connected it to my PC and a window came up saying something about needing to restore the iPod to work with Windows, so I hit "restore iPod".  iTunes will not recognize the iPod. Suggestions?

    Newly replaced iPod Nano (6th generation) not recognized by iTunes on PC. Any suggestions?

    Hi LaureltheVictor,
    Thanks for visiting Apple Support Communities.
    See this link for some additional troubleshooting tips:
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    Best,
    Jeremy

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • I have a new Windows laptop with iTune that is not recognizing my iPhone 5?

    I have a new Windows laptop with iTune that is not recognizing my iPhone 5? I have the latest version of iTune and when I open iTune it comes up with an error message that " the registry settings used by the itunes driver for importing and burning CDs and DVDs are missing" Thismessage always come up, even after installing the latest version of iTunes.

    Same is here
    Have a MacBook Pro , upgraded to Lion and now cannot download music from CD to ITunes "... An unknown error occurred (-50)".
    Help

  • I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

    I'm trying to order an album and I'm getting this message:
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
    As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

    Yes -
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
    The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
    LN

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I have iMovie 09 and have successfully used an older Sony Handycam to directly capture and record. Now I have a Sony HDR-PJ230 and it is not recognized. Do I need to upgrade to iMovie 11 or ???

    Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???

    Hi jcm2656,
    iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
    iMovie '09: Camcorder Support
    http://support.apple.com/kb/HT3290#1
    iMovie ’11 however, does support it. See this article -
    Apple - iLife '11 Help - iMovie ’11 Supported Cameras
    http://help.apple.com/imovie/cameras/en/index.html
    Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ipod Nano2 is not recognized by PC/itunes.  After restarting the iPod and switch to disk mode "ok to disconnect" appears instead on "do not disconnect".

    Can nayone help.  thank you in advance.

    So even in Disk Mode the iPod is not recognized by your PC or iTunes software?  Are you plugging the iPod into a high powered USB 2.0 port?  Have you tried a different USB sync cable to verify that your current cable isn't faulty or damaged?
    I assume you are using the latest version of iTunes correct?
    B-rock

  • My daughters Ipod is disabled and it mentions to connect to Itunes. What then? I am stuck and did download Itunes. It says I need to enter the Ipod password? I cant do that because its locked. Help please. Thanks.

    Ipod is disabled and cannot connect to Itunes as it states on the message board. What to do to reset or access? Thank you.

    Restore the iPod in Recovery Mode

  • I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • HT1212 I am trying to access my pictures off of my old iphone, it says it is disabled and i do not remember my password. If i restore the device will I lose my pictures because that is what I am trying to avoid?

    I am trying to access my pictures off of my old iphone, it says disabled and i don't remember my password. If I restore the device will i lose my pictures because that is what i am trying to avoid? I originally had my phone set up with itunes through the at&t store here locally so the odds of them having that same computer are probably pretty slim.... Any other options?
    Thanks,
    Alisha

    It's too late. If you had been syncing your phone with that computer prior to the screen failing, it wouldn't be asking you for a passcode...

  • TS1398 I have just purchased an iPad mini and it will not join my wifi. It detects my wifi network but will not join. I have a Mac, 2 iPhones and an iPad 4 and all work perfectly. The new iPad mini just won't behave. Any ideas?

    I have purchased an iPad mini and it will not join my wifi network. Any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

    I have a macbook air (mid 2012) and a thunderbolt display (27''). 
    Do I absolutely need to connect the power supply together with the thunderbolt cable ?
    I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • TS2551 I have parallels on my Mac and I want to put pictures from a cd on to the mac but it will only go to microsoft  windows, any ideas

    I have parallels on my Mac and I want to add photo's from a cd onto my Mac.But everytime I try to import them they go to windows application which I don't want.Any ideas?

    In iPhoto: FIle -> Add To LIbrary or drag them to the  iPhoto Window.
    Regards
    TD

  • HT1918 I have created a free apple Id and I am not able to use it further please do the need full

    I have created a free apple Id and now I am not able to use it further

    Hello Asokwah,
    Sign out from your pple Id on your Device and Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and then Sign In with your Apple Id here and Under your Primary Email Address click on Resend Next to Verification Email Sent. Now Go to your Email Account and Verify your Apple Id again by clicking in the Link inside the Mail that you might have received from Apple. Now Sign In on your Device and try to make a Purchase and if it is for the first time then you will be asked to Review your Account and if you have entered your Credit/Debit card in your Account then you will have to just Enter your 3 Digits CVV Number and then click on Done. And then you can try downloading any Application from AppStore or Music from iTunes Store and check if its working.

Maybe you are looking for

  • Macbook pro to epson projector via hdmi cable

    Projector says "no signal" when i look at the HDMI port. Any suggestions? I would like to simply project an iPhoto slideshow or a downloaded video.

  • Multiple soap modules

    hello, i'm biulding a flex client that works with a soap web servise, i imported the wsdl though the wizard and all was good... untill i had to use a diffrent module within the same webService. the other module uses some of the same soap types as the

  • Shopping Cart default delivery date

    Hi, SAP SRM system takes by default  current date as a delivery date in the Shopping cart line item. Can any one suggest, whether we can set the same as next working day by default  i.e.. If S/C raised on Friday then defau Delivery date should be on

  • How to create a role in EP

    Hi All, I am new to EP, Please let me know how to create a role in EP and how to map ABAP based roles to EP. Thanks a million

  • Reading element from XMLTYPE column with repeated

    I have below data in my XML column and want to read all the values of <name> <data> <name>aaa</name> <name>bbb</name> <name>ccc</name> </data> Please suggest. Regards.