I have a simple movie clip/ button question

I have a simple movie clip on my scene 1 frame 1. Inside that movie clip I have another movie clip, with a button on top that controls that mc. Also have another movie clip with a button on top that I would like to take me back to scene 1, frame xyz. I cannot remember how to do it.

Well, I don't know the code to use, so I haven't tried anything unfortunately. I havent typed code in the past couple of years, so I vaguely remember having to type in something pertaining to a _root or something like that ...here are a few screen shots, like I said, the button nested in the movie clip I need to take me back to the main page and goto a different frame. I only have one scene, as2,
on scene 1, the movie clip is the cube at bottom left. inside the mc the button i need to take me back is bottom right-thanks!

Similar Messages

Movie Clip Button - Action Script issues

This is a two part question:
1. I have my movie clip button, "mcAboutus" then inside my
movie clip I have 5 layers: actions, labels, text, animated
rollover("mcAboutusover"), animated rolloff("mcAboutusoff"). On the
labels layer I have _up, _over, _off. On the _up is the text layer,
on the _over is a movie clip of the animated
rollover("mcAboutusover") which is 90 frames, and I want to loop as
long as the mouse is over the text. And the _off has the
"mcAboutusoff" movie clip.
So I was able to have the rollover work, but when I roll off
the rollover animation continues on until the end of the animation.
I understand it has to do with the fact that it's a movie clip, but
how do I point it to go into the movie clip and read the animation
and that on the last frame of the animation I have a
"gotoAndPlay(1);" to have the animation continue looping as long as
it's in a rollover state?
here is the code I have for the _root:
this.mcAboutus.onRollOver = function() {
mcAboutus.gotoAndPlay(_over);
this.mcAboutus.onRollOut = function() {
mcAboutus.gotoAndPlay(_off);
The other problem I am having is that once the I have rolled
over the animation once, the button dies and won't let me rollover
it again?
Aside from the "stop();" action in the mcAboutus movie clip
symbol, I don't have any other actions, should I put items in the
different movie clips I have set up?
ALSO.... The reason that I have the main movie clip button,
and two movie clips residing in the mcBtn is I wanted light rays to
be glowing from the text, and I was having a hard time getting what
I wanted from Flash, so I created in After Effects and exported two
.SWF files. So those .SWF files are the _over and _off states in
the mcBtn. I am having a very hard time controlling those Movie
Clips within the main MC Button. Please, any help would be greatly
appreciated.

quote:
Originally posted by:
kglad
mcAboutusover should be a movieclip that has your over
animation and it should have a stop() on its last frame. it should
be placed on your _over frame in mcAbousus' timeline. you should
then use:
Ok, so I have my main timeline, in it has my
mcAboutus>> then inside that I have three labels. _up which
has the static text then on frame 5 I have the _over which has the
keyframe for the mcAboutusover, this animation is 90 frames, then I
have on frame 10, the _off for the RollOut state, and I have a 10
frame animation on that one. I still can't get it to continue on
after the initial rollover, the button still dies down.
I am going to redo everything in a presentation timeline,
based on Total Training and see if that helps my problem out any,
and will get back to you tomorrow with more info. Thanks

Hi, i am a bit of a newbie at AS & need some help applying it to a movie clip button

I have created a movie clip button but am stuck with the actionscript. I have created the rollover and rollout for this movie clip button but i want it to do 2 things after this i want it to go and stop on the first frame of a movieclip which has my content on it called portfoliogallery_mc (which is also the same instance name for it) when you then click the button i want it to go and play frame 11 of that movie clip portfolio gallery_mc.
Here is my current actionscript i HAVE Flash 8 on my comp that i am currently using.
Please note my actions are on a layer called actions and not on the movieclip button itself.
nxtimagetwo_mc (is the movie clip button/instance of mc)
THE CODE I HAVE USED
this.nxtimagetwo_mc.onRollOver = function() {
nxtimagetwo_mc.gotoAndPlay("_over");
this.nxtimagetwo_mc.onRollOut = function() {
nxtimagetwo_mc.gotoAndPlay("_out");
portfoliogallery_mc.gotoAndStop(1);
portfoliogallery_mc.gotoAndPlay(11);
currently it is playing to frame 11 not stopping at frame 1 and stops on frame 20 where i have a stop action. I also have a stop action on frame 1 of that movie clip.
What I want it to do is first stop at frame 1 of that movie clip and when the button is clicked again to go and play frame 11 of that same movie clip.
Basically what i want the mc button to do is 2 things automatically stop the mc for the first content and when button is clicked let the content fad out and play to where the next stop action is set to in the Movie Clip.
Nothing to with the above www.rsquareme.co.uk is my current portfolio website if you would like to check it out it is not fully complete yet.

it doens't make sense to execute:
portfoliogallery_mc.gotoAndStop(1);
portfoliogallery_mc.gotoAndPlay(11);
only the 2nd line of code will be effected.
i know you want to control 2 movieclips. what are the instance names of the two movieclips and what do you want to occur in each of those movieclips.
or, do you want to control 1 movieclip and have it play a certain sequence of frames followed by another sequence of frames?

What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

Per http://www.apple.com/ipad/specs/
AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Cursor stops movie clip buttons

I have animated movie clips as buttons. When the animation
reaches the point where the cursor sits on the button it vanishes.
Here is the script I have on the main time line:
//news_mc is the instance name of my movie clip button
news_mc.addEventListener(MouseEvent.CLICK, newsPage);
news_mc.addEventListener(MouseEvent.MOUSE_OVER, newsRollOn);
news_mc.addEventListener(MouseEvent.MOUSE_OUT, newsRollOff);
news_mc.buttonMode = true;
function newsRollOn(event:MouseEvent):void {
news_mc.gotoAndPlay("in");
function newsRollOff(event:MouseEvent):void {
news_mc.gotoAndPlay("out");
function newsPage(event:MouseEvent):void {
gotoAndStop("news");
I know there is something about
news_mc.mask = ??? I'm not sure if I sure what part of the
mask I use. I have a layer that has the button background (instance
name - background) and then the 2 layers that form the animated
mask - the mask layer contains a copy of the button background
(instance name - background2) and then the animated later of the
mask contains a gradient that slides over the button (instance name
- masker).
What is happening?

ROLL_OVER and ROLL_OUT rather than mouse_over and _out did
the trick!

Movie clip button navigation

hey, i'm pretty new to flash and i'm attempting to create a
site with different scenes representing different pages.
i have four movie clip buttons. One of these buttons should
link to the "about me" page, which so far only has another movie
clip with pictures. from the main page i'd like a user to be able
to click on the about me button/movieclip and the pictures should
appear.
i've been using the code:
on(release){
_root.gotoAndPlay("about_pictures")
however whenever i run the preview, nothing happens when i
click the button.
main timeline includes :
about me > pictures with a motion tween(pictures_about_mc)
> the movie clip of pictures(pictures_mc).
background
buttons
actions
any help would be appreciated. thank you in advance.

If you are genuinely using scenes, then your gotoAndPlay()
call needs to include the scene name and the frame...
gotoAndPlay("about_pictures", 1)
and "about_pictures" needs to be the name you assigned to
that scene in the scenes panel.
Using scenes and the way you coded the button are both not
clean ways to code--things end up being hidden from plain site.
Instead of scenes, just use the one maintimeline. Instead of
on(release, etc) use myBtn.onRelease = function (){...} in the
actions layer.
Makes life so much easier in the long run, especially a year
from now when you're trying to change some code and can't find
where you hid it.

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

Just learning...help on movie clip buttons

I've tried tons of tutorials and i cant seem to get my movie
clip button to work when i put the mouse over the button.
i have included a screen shot of my time line and code.
Layer 10 frame 1 is where all the script is.
"actions" layer has my "stop" codes in frames 1 and 20
time
line and code
Thanks for your help.

ok if i change "home" to "this" in my code, do i also have to
change my instance name for my button layer from "home" to "this"
as well?
and how do I cast e.currentTarget as a movie clip?
sorry this is only my 3rd day playing around with Flash.
Thanks!

Movie Clip Button not working within an Movie Clip

Hi,
I'm trying to create a movie clip on my my main timeline that has a movie clip button within it that pops up a box in the middle of the site that contains text and links. On Frame 1 I have the Up state, frame 2 the roll over state, and frame 3 my Down State (where Box appears).
on (rollOut) {
    this.gotoAndStop("1");
on (rollOver) {
    this.gotoAndStop("2");
on (release) {
    this.gotoAndStop("3");
I have stop(); on each of the 3 keyframes
The problem is that on the main time line, the button is clickable but doesnt do anything
Any suggestions, what am i missing?
Cheers

Ok, i have this assigned to a movieclip, is this wrong? Especially for MovieClip Buttons. Anyway, just tried this and it works!
on (rollOut) {
    this._parent.gotoAndPlay(1);
on (rollOver) {
    this._parent.gotoAndPlay(2);
on (release) {
    this._parent.gotoAndPlay(3);

I have numerous music movie clips that I have not purchased through iTunes, can I stream these "home" movies to apple TV? And if this is not possible, is there another complete program available that I can purchase to have my music movie clips stream to a

I have numerous music movie clips that I have not purchased through iTunes, Is it possible to stream these "home" movies using iTunes to apple TV?
And if iTunes will not allow it, is there another complete program available that I can purchase to have my music movie clips stream to a TV and/or another computer?
Any help would be appreciated. Thanks

Thanks, Winston C, I've actually tried everything you suggested. I'm thinking now that the Home Sharing problem likely is related to Bonjour--I've seen several people mention this with similar (but not identical) problems. The solution that seems to work for some people is to uninstall and reinstall Bonjour. Frankly, I don't want to go through the trouble given that the iOS 7 release is imminent.
One thing that I haven't tried is resetting the ATV to factory settings. I'll give that whirl.
Thanks for your advice!

I have a recorded movie clip on my desk top that I would like to send by email...How do I do that

I have recorded a movie clip on a flip camera and downloaded it to iPhoto. I would like to send it by email to an acquaintance. Since iPhoto does not permit emailing of movie clips I saved the clip to my desktop and attempted to attach it to an email message. No good...?file too big? email would not load and send.

I would like to send it by email to an acquaintance. Since iPhoto does not permit emailing of movie clips I saved the clip to my desktop and attempted to attach it to an email message. No good...?file too big? email would not load and send.
Most internet providers allow email attachments limited to about 20 MBs—a few less. In cases where the file size exceeds this limit, you basically have three options:
1) Re-compress the file to a smaller size. This usually involves reducing the display size along with a reduction in the data rate which often translates to degradation of quality. (I.e., Reducing the total data rate by half will reduce the file size by half.)
2) If both parties share an IM connection, the file can be sent directly from one party to the other.
3) Upload the main data file to a server and email a reference, QTL, or URL of its location to the receiving party who can then access/download the file. For instance, most ISPs allocate a certain amount of storage space to each user account. Many might be sufficient for your needs. If you have a MobileMe account, your movie can be shared/posted directly from iPhoto. There are also a number of sites, both free and commercial, that allow the uploading or sharing of such files. Some, like YouTube, are oriented towards viewing modified versions of you file while others allow downloading of the original file as uploaded. I believe all require a formal membership (free or paid) which is a sticking point for many people.
In short, there are many options available and you will probably need to research which might best serve your needs.

Easy movie clip / timeline question... please help.

This is a pretty simple question about something I just cant
figure out.
I have a movie with 2 frames. On the frist frame are two
buttons. On the second frame is a movie clip. In the movie clip are
two labeled frames, "ball" and "box" for two parts of an animation.
One part plays a ball bouncing. The other plays a box rotating.
What I want to happen is when you click the ball button it plays
the movie clip and starts on ball. When you click the box button it
plays the movie clip and starts on box. The code for the buttons is
simple:
boxButton.onRelease = function ()
anim_mc.gotoAndPlay("box");
ballButton.onRelease = function ()
anim_mc.gotoAndPlay("ball");
The movie works fine as long as the movie clip and the
buttons are on the same frame, frame 1.
But if I move the movie clip to frame 2 it does not work.
Why!!!??? How do I point the button to play the movie clip on frame
2?
It will work if I just send the button to gotoAndPlay("2");
obviously, but what if I want to target specific frames?

I tried this like you said:
boxButton.onRelease = function ()
_root.gotoAndStop(2);
zoom_mc.gotoAndPlay("box");
Thinking it would go to frame 2, then play the movie clip
starting on frame "box" within the movie clip. But it doesnt. Of
course, it plays frame 2, and the movie clip plays, but only on
frame 1 of the movie clip, it does not go to "box" which is in the
middle of the timeline of that movie clip.
I guess there is no way to do this?
Accessing labeled frames within a movie clip from a buttion
on the main timeline requires that the button be on the same frame?
This seems strange.. I guess.....

In actionscript 3.0 how do i make a nested movie clip button go to a frame on the main timeline

I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button
I added an event listener to the blog button by saying,
blog.addEventListener(MouseEvent.ROLL_OVER,gotoblog);
function gotoblog(evtobj:MouseEvent){
gotoAndStop(2)
this part of the code works it goes to the 2nd frame of the timeline it is in and stops wich is a blown up version of the origanal symbol
i added on frame 2 a second command
blog.addEventListener(MouseEvent.CLICK.gotoblogpage);
function gotoblogpage(evtobj:MouseEvent){
gotoAndStop("blogframe")
trace("the blog button was clicked")
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?

I have a similar problem if could please help me i'd really apreciate it!!
So i have a looping animation of some thumbnails, the hierarchy goes like this
Scene1(main timeline) -> imgBar(MC)->imgBarB(MC within the imgBar MC)
My buttons symbols are in the last MC "imgBarB" where i have this code:
ss1.addEventListener(MouseEvent.CLICK, OneButtonClicked);
function OneButtonClicked(event:MouseEvent):void{
MovieClip(root).gotoAndStop("ssbox1");
I want to control the Btns in my "imgBarB" MC to play a labeled frame(named "ssbox1") on another MC on the main timeline,this other MC goes like this:
Scene1(main timeline)->ssbox_mc(MC where my labeled frame is)

Movie Clips/buttons HELP!!

I have 4 movie clips on a stage that are supposed to act as
buttons(About, Resume, Work, Contact) When I roll over one movie I
want the movie to play and stay on the screen. When the user goes
to the next button and clicks and releases I want the previous
movie clip that was on stage to disappear. I have tried with
success with this code on the main stage but it only works for
rollovers. I want releases. Here is the code.....
b1. onRollOver = over;
b1. onRollOut = out;
b2. onRollOver = over;
b2. onRollOut = out;
b3. onRollOver = over;
b3. onRollOut = out;
b4. onRollOver = over;
b4. onRollOut = out;
b5. onRollOver = over;
b5. onRollOut = out;
function over() {
this. gotoAndPlay(2);
function out() {
this. gotoAndPlay(3);
Any help is appreciated!!

Assuming that frame 1 is the "hidden" state for the clips,
just change the code as follows:
// add a variable to the root timeline
var currentClip;
// add function
function click() {
this._root.currentClip.gotoAndPlay(1);
this._root.currentClip = this;
// add code to buttons
b1.onRelease = click;
b2.onRelease = click;
// and so on...
if frame one is not the hidden state, just change the first
line of the click() function:
this._root.currentClip._alpha = 0;
// then change the over() function
function over() {
this._alpha = 100;
this.gotoAndPlay(2);
Hope this helps,
Albee

Movie clip button help

Hello im trying to develop a small swf file that the user can
control a video that gives the impression of rotation and
transparency using arrow buttons. I have a 2 small movie clip files
that are currently spread across the timeline exactly 200 frames.
the videos are controlled by means of fast forward and rewind this
gives the impression of rotation (backwards and forwrds) i have
already got the fast forward and rewind function working i would
like another set of arrows that control the transparency or alpha
of the second movie clip so that when the user presses either an up
or down arrow button the transparency goes up or down. Im very new
to action script so any basic explanation help would be great. The
code for the forward and rewind buttons is as follows (ignore the
play function as this button is hidden off stage):
stop();
play_btn.onRelease = function (){
play();
pause_btn.onRelease=function(){
stop();
forward_btn.onPress=function (){
_root.createEmptyMovieClip("controller_mc",1);
controller_mc.onEnterFrame=function(){
_root.gotoAndStop(_root._currentframe+3);
if (_root._currentframe+3 > _root._totalframes){
_root.gotoAndStop(_root._totalframes);
forward_btn.onRelease=function (){
controller_mc.removeMovieClip();
forward_btn.onReleaseOutside=function (){
controller_mc.removeMovieClip();
rewind_btn.onPress=function (){
_root.createEmptyMovieClip("controller_mc",1);
controller_mc.onEnterFrame=function(){
_root.gotoAndStop(_root._currentframe-3);
if (_root._currentframe-3 < 1){
_root.gotoAndStop(1);
rewind_btn.onRelease=function (){
controller_mc.removeMovieClip();
rewind_btn.onReleaseOutside=function (){
controller_mc.removeMovieClip();
}

//button is released and increases the Movie Clip's current
alpha value by 10%
increase_alpha_btn.onRelease=function(){
if(MovieClip._alpha<100){
MovieClip._alpha+=10;
//button is released and decreases the Movie Clip's current
alpha value by 10%
decrease_alpha_btn.onRelease=function(){
if(MovieClip._alpha>0){
MovieClip._alpha-=10;

I have a simple movie clip/ button question

Similar Messages

Maybe you are looking for