I have and iPhone 4S I recently changed the housing and my touch only responds sometimes... I wanna know if after u installed the ios7 anyone had this problem ? Cause I installed it and I changed the housing so I dnt kno which one caused the problem
I upgraded my software to ios7 , and I changed my phone housing I have the 4s.. Since my touch only responds sometimes ... Anybody had any problems with their touch after upgrading their software???
Find a competent repair shop. You broke it.
Similar Messages
-
My computer screen is skipping and switching erratically between sites/functions. Sometimes it just switches to a grey dashboard screen. Has anyone had this problem?
Please tell us you iMac model and the Mac OSX version you run. iMacs have been in continuous production since 1998 in four broad families and hundreds of variants. Without knowing your specific Mac type, someone trying to help might give you advice inappropriate for your model.
A good place to start to determine in which family yours resides is to do "About this Mac" from your Apple menu (left end of menubar) to get this window:
Note I've indicated two entries with red arrows. Please tell us what your computer shows for "Version" under OSXn and for your processor.
The forum you are in now, "iMac (PPC)" is for iMacs made between 1998 and 2006. -
I also have this problem. I have a Mac Mini that is just 2 months old and use Yosemite. This just recently started after i went into Preferences to Trackpad and practiced. I did try changing batteries in the trackpad, but they were not l
Please tell us you iMac model and the Mac OSX version you run. iMacs have been in continuous production since 1998 in four broad families and hundreds of variants. Without knowing your specific Mac type, someone trying to help might give you advice inappropriate for your model.
A good place to start to determine in which family yours resides is to do "About this Mac" from your Apple menu (left end of menubar) to get this window:
Note I've indicated two entries with red arrows. Please tell us what your computer shows for "Version" under OSXn and for your processor.
The forum you are in now, "iMac (PPC)" is for iMacs made between 1998 and 2006. -
I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?
Do you have your Opacity Control set to a very low value?
-
When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?
See "error -3259" here.
-
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.
Try this.
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?
Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972] -
I have an iPhone 4S. I noticed that some of my contacts disappear from the phone. Has anyone had this problem? Thank you
I went into the cloud on phone it was on. Turned off and back on. Now i have 6 of one contactDeleted face books also incase that was the issue. I went to Itunes and couldnt find contacts - now I wonder it is is my outlook email too adding information as I am seeing contacts that are only on my outlook emails.
-
I updated my iPhone 5 yesterday and it replaced ios6.2 with iOS 6.1 has anyone had this problem?
You are confusing your iOSs...
Today iOS 6.1 was released... replacing iOS 6.0.2 -
Just bought Mountain Lion from the app store on my Macbook Pro. In the middle of installion it froze up my computer saying that the installation failed,
It says my Hard Drive is damaged and cant be repaired. Has anyone had this problem? Im completely screwed...Thanks Apple!!Welcome to the Apple Support Communities,
I had a similar issue and it was an easy fix for me. First you need to log out of your account completely in the Mac App Store. Quit the application. Re-open the Mac App Store. Click log-in, enter your Apple-ID and password. Now when the screen pops-up that has all of your billing/credit card information on it DO NOT select done. Instead select View my Account, then select View hidden purchases. There you should be able to find iPhoto. Hope this helps if not let me know. I'm still searching solutions for you.
Connor -
I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?
It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.
-
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.
Maybe you are looking for
-
Error while loading source system data
BW unknown in source system The BW IDoc type ZSBA003 is not the same as the source system IDoc type The following errors occurred in the source system: EDI: Partner profile not available Entry in inbound table not found Entry in outbound table not fo
-
A reliable setup for streaming to Apple TV
I'm actually looking for suggestions. At the time I got the ATV2 I had a Linksys wireless cable gateway 200 with the economy internet plan from comcast (1 mbps). That was obviously way too slow so I upgraded to the 6 mbps and now thats much better. B
-
Problem With Cyan Updates!
My lumia 920 did the cyan update last night and after the update everything is faulty. It doesnt detect my sim like before, it is set to flight mode and i cant set it back now. the time and date is always off. Cant turn it on for long and i cant upda
-
Wl6.1, war files and 2 letter jar files....
Hi,I have finally found why my WAR file isn't loading with weblogic 6.1. It seems that it doesn't like two letter class libraries (eg ab.jar) and will through a vague error message at deployment (Prefix string too short). I don't know what has change
-
Problems Uninstalling and Re-installing
I'm having trouble with Adobe. I've tried uninstalling it and reinstalling it, but it still is not creating PDF's. When I open an existing PDF, I get an error message and the screen exits out right away. The last time I tried to reinstall Adobe 7.0