I have been unable to get Photoshop Elements 11 to show in my Open With Programs
I have been unable to get Photoshop Elements 11 to show in my Open With Programs list. The program is installed but will not show in Open With programs.
Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian
Similar Messages
-
Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
I have been unable to set up my email on the iphone4 I am with btyahoo
help - I have been trying for two nights to get my email account set up on my iphone4 can anyone help?
I have been unable to turn on automatic download on my iPad 2
It could be your geographical location.
"Automatic Downloads is currently available in the US, Australia, Canada, Cypress, France, Ireland, Luxembourg, Malta, Mexico, New Zealand, Spain, and UK."
From here > iTunes Store: How to enable Automatic Downloads -
I have been unable to get the microphone working in any applications on my ipad.
I have the ipad model MD368X/A version 6.1.3
I have not been able to get the microphone to work in any application inc Sari.
Any ideas as the the location of the mic settings if any or am i looking at a hardware issue?
Looked for software updates for this model however indications that all is current.
Any ideas would be greatly appreciated
Cheersazjack169 wrote:
...my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps...
This is because the iPhone 5C does not have a motion coprocessor: a chip that calculates and records your motion like steps and distance. Your iPhone 6 has one (it's called A8). In this case your wife can use a Health supported third party app (like Nike+ Running) to report this data to the Health app.
Hope this helps! -
Telstra Air Signed up on the very 1st days but they have been unable to get me going.
As the title suggests, I am still waiting on my escalated query, of which I have contacted Telstra over since the 1st week of Air's introduction. All I have been told is that they get errors when they try to add me. They have never called me and have always left it up to me to query what is going on. (which I might add is nothing). Very disappointed with Telstra over this escalated query of which the only answer I repeatadly get is that it is escalated. DOH!!!!!!!No Air nor communication, very poor service, considering the time it is taking or not taking in between the techs coffee breaks. Been a long term Telstra customer and burnt like they just dont care.
I hear your frustration. Here's my journey so far: I've been a Telstra Cable Bigpond customer for a couple of years now.Heard about Telstra Air, and discovered the cable modem I had (CG3100) was not compatible.So I paid the $216, ordered and received a new CG6300 which is Telstra Air compatible (Telstra Gateway Max).Connected it up, then signed up for the service about 3 weeks ago.Got the message saying it would take 2-5 business days to complete.Didn't hear anything, so called them back a week later.They advised it's still processing, and we'll let you know when it's complete.Gave them another 2 weeks, heard nothing, so called them back again on Saturday.They said the name of my service was "an old name", and they're getting some error trying to activate Telstra Air for customers on this old named service.So that's what I've been told – there's some issue at the back end which is preventing them from upgrading me.So I feel like I've been conned in to purchasing a new modem (CG6300), even though my old modem (CG3100) worked fine ... the only reason I purchased the new modem was for Telstra Air. I've posted to other forums trying to find if anyone else had experienced the same and had a solution, but to no avail. Was even hoping that Telstra's customer service would call me even once, but I've had to call for an update every time. Even a call to say "we haven't fixed the problem, but we're still working on it and we haven't forgotten you" would go a long way. Very disappointed.
-
I have been unable to get services to load in finder. suggestions?
I open Services in finder - no services apply -services preferences. I selct services preferences, check the services I would like to see in finder. There does not seem to be an 'apply'or 'save' button. When i close the preferences, services in finder are still empty. What am I missing here?
Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian -
Photoshop Elements 5.0 error message prevents opening entire program
Have Photoshop Elements 5.0 running for years on laptop with Windows Vista. Now won't open program and gives error message: attempt to access invalid address. Same after removing program completely and reloading from original disk. How to fix and use program once again?
Can you post the exact content of the error message, including the title of the error message box? A screenshot would be best.
Ken -
I have a black dialog box on my display that I cannot get rid of. I was cleaning my keyboard and must have hit some combination of keys that caused it. It shows text announcing everything I open on the display or am looking at. Can anyone help me turn this off? Thanks.
Hi there francone,
It sounds like you may have the Picture-in-Picture Zoom option enabled. Take a look at the article below for more information as well as how to disable it.
OS X Mountain Lion: Zoom content on the screen
http://support.apple.com/kb/PH11488
-Griff W. -
No setup screen when first starting apple TV
Hey Docbarb2,
You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
https://support.apple.com/en-us/HT202118
Change the language on your Apple TV
https://support.apple.com/en-us/HT202799
Take care,
-Norm G. -
Since loading CC, I have been unable to Launch Photoshop CS3 du to following error ..........
"To open “Adobe Photoshop CS3” you need to install the legacy Java SE 6 runtime."
Can anybody please help me with this problem Adobe Support no good !!!!Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
I have been unable to get the health app to work
I have a iPhone 6 and my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps. I have them in the dashboard but nothing happens.
azjack169 wrote:
...my wife a 5C, the Apple Health Apps works on my phone but not on hers. My neighbor has the same problem, it doesn't record record distance or steps...
This is because the iPhone 5C does not have a motion coprocessor: a chip that calculates and records your motion like steps and distance. Your iPhone 6 has one (it's called A8). In this case your wife can use a Health supported third party app (like Nike+ Running) to report this data to the Health app.
Hope this helps! -
Got a computer message about upgrading to something called silverlight. A message now covers bar for reply, send, forward, etc. and I can't send emails on firefox. This is not a problem when I use Safari.
Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips -
Ever since I upgraded my iPad to IOS6, I have been unable to get into my work email, which is through Google. No problems before update.
Downgrading to an older iOS version is not supported on iOS devices.
Make sure that you have downloaded all of the updates for your apps and see if that helps.
Try this as well. if the Apple apps are working OK and it is the third party App Store apps that are crashing - try downloading another app - any free app. See if that helps.
You said that you reset the iPad but you may have to restore your iPad to factory settings and then to a backup if you can't resolve the problem. -
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
-
I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?
Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Maybe you are looking for
-
EPM Add-in not available in RRMX
Hello All, EPM Add-in is installed and can be accessed through MS Excel. In our scenario, BEx Analyzer is accessed through RRMX Txn however EPM add-in tab is not available in the Excel. Our customer needs both BEx Analyzer add-in and EPM add-in the s
-
Firefox 36.0.1 often unable to connect to Internet.
Only trigger I can seem to find is something mentioned in another help ticket that sounds like a slightly different problem. When Firefox is open for a while without loading any web pages, it suddenly stops being able to do so. When I attempt to load
-
I am not able to edit my desktop, I receive the following error: You can't open the application "Desktop" because it may be damaged or incomplete. Also, I cannot rearrange folders, add folders, or move things out of my trash back to the desktop.
-
Hi, After my upgrade to OS x Mountain Lion I managed to connect the birthdays of my facebook friends to my Calendar. The problem is that my entire Calendar is now filled with birthdays and it's hard to notice other (more important) notes (even if the
-
I have a filable form and I need to add ranking questions
I have a filable form and I need to add ranking questions. How do I do this?