I have been using iphoto 09 and am now unable to import photos from my camera.  I get the message that they are being imported but after 10 minutes nothing has actually been imported.

I have just been trying to import photos from mine and my husbands cameras but nothing seems to be happening.  I get the message to wait while they are being imported but after 10-15 minutes, nothing has been uploaded.  I have always had updates downloaded when they become available and can't think what I may have done wrong.
I hope someone out there can give me some advice.  My mac is running Snow Leopard and I love it.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Similar Messages

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    Hello mrmacjohn,
    Verifying that any iCloud account that may be signed in is signed out should resolve this error.
    On your Mac, open iCloud preferences, then click Sign Out.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Cheers,
    Allen

  • I don't want the 'chat' option. how can I disable it? I often get the message that I am being disconnected from chat because i've logged on from another computer. I never use chat, and it just seems to be a problem. How can I get rid of it?

    I often get the message that I am being disconnected from chat because i've logged on from another computer. I never use chat, and it just seems to be a problem. How can I get rid of it?

    Don't expect any wonders. If you use it heavily with multiple applications running at the same time, nobody can help you. It's physics: more usage => higher energy consumption.
    Here you can find some tips to reduce the battery consumption. My tip: close applications if you don't need them right now and reduce screen brightness.

  • TS4020 I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

  • I just got a HP Deskjet 2540 and when I try to print (direct print) from my iPad I get the message that the printer is busy

    I just got a Hp Deskjet 2540 and when I try to  print (direct print) from my iPad, I get the message that the printer is busy.  Can anyone help?

    Exactly what is the message you get and when. Presumably you are using IE9 to download the Firefox Installer file.
    Try the site http://www.mozilla.org/en-US/firefox/all.html to download the latest Firefox version in the correct language.
    * see also [[installing Firefox on windows]]

  • I have been trying to download Firefix 4, and eveytime I try to install it on my computer I get the message that the file is corrupt

    I am using an iBook running OS 10.3.9 - and each time I have tried to launch the download so I can install it on my hard drive I get the message that the file is corrupt and so it won't complete the operation.

    It sounds like you must have Automatic Downloads enabled on the Phone in Settings>iTunes & App Store>Automatic Downloads>Apps>On. That is why the apps are being downloaded to the phone, I would have to assume. You could try turning that off on your phone for starters. Although I don't think that would have any effect on the iPad, it won't hurt anything either.
    Try this and see if the apps show up on the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I want to delete ConstaSurf and SearchProtect but I get a message that they are in use and it won't let me delete them.

    I started to download Firefox and without realizing it I agreed to some additional programs that I do not want on my computer. The ones I can identify are ConstaSurf and SearchProtect. When I try to delete them, I get a notification that they are in use or in another file, and it won't let me delete them. I would like to delete them and then try downloading Firefox more carefully. Thanks for any help. I am not computer savvy.

    See this: http://malwaretips.com/blogs/constasurf-virus-removal/
    For step 1 - Uninstall ConstaSurf program from your computer - thru the Control Panel
    If that's where you get that message about them bring in use, try closing Firefox and any other browsers that you may have open and then try to uninstall those two.

  • TS4006 I have set up Find my phone on two Iphone 5's.  On one I get the message that it is offline but they are both set up identically

    I have set up Find my phone on two Iphone 5's On one I get the message that it is offline.  From this phone, I can locate phone #2 but from phone #2, it say phone #1 is offline

    Welcome to the Apple Community.
    Once you have enabled find my phone in your iCloud settings on your phone and find my mac in iCloud settings on your Mac, you can log in at iCloud.com and see both devices on the Find my Phone feature there.

  • I moved all my Pages documents from my Macbook Pro to my present Macbook Air and then gave away my Pro.  Now, when I try to view my documents I get the message that the document is too old and I have to save it on Pages 09 first.  How do I do that? i

    I moved all my Pages docs from my Macbook Pro to my new Macbook Air.  Now, when I try to view my docs I am told that they are too old and I must save them in 09 first.  How do I do that?  The version of Pages I am using on the Air is 5.2.2

    No release of Pages v5 can open AppleWorks, Pages '05, Pages '06, Pages '08, or RTF documents. Sometimes, it cannot open its own documents.
    You will need to do one of the following:
    Borrow your MacBook Pro back until you can export all your incompatible documents to MS Word (Which Pages v5 can open)
    Install your iWork '08 DVD on your new Air, and then immediately apply the following Apple Updaters. Again Export to MS document formats.
    Pages v3.0.3
    Numbers v1.0.3
    Keynote v4.0.4
    Purchase iWork '09 DVD, and then immediately update with Apple iWork 9.3 updater.
    Open the document(s) that Pages v5 won't permit
    Save as Pages '09 v4.3 documents, or export as MS Word
    Upload to Zamzar, and convert to MS Word (free for limited volume)
    No sensitive documents
    Email notification within 3 - 4 minutes with MS Word document download link
    After you do either item 2 or 3, run Disk Utility and verify/repair application permissions on your boot drive. Open your converted documents in Pages v5.

  • When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

    When I  run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

    Hello there, toestothenose.
    It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
    Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
    http://support.apple.com/kb/ts1448
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4623 I updated to ios7 and now my cloud library won't work. I get the message that I need to activate my Adobe ID first

    I updated to IOS7 and the cloud library doesn't work. I get the message to activate my Adobe ID first. How do I do this?

    Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Select the Purchases page in the App Store and locate the app(s) in your purchase history. If there's a button markedACCEPT on the right, click it.
    Step 2
    If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
    Step 3
    From the App Store menu bar, select
    Store ▹ View My Account
    Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
    Step 4
    If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
    Step 5
    Delete the app(s) you want to update and reinstall them.

  • HT1222 I get the message that there are items that I bought in tunes that have not been transfered. I syncronize my ipad, but still get the sa,e message. what can I do?

    I am trying to update my ipad. When I start the process, I get the message " there are items bought in itunes that were not transfered. I synchronized my ipad, but still get the same message. What can I do?

    I assume that this means items that haven't been transferred from the iPad into iTunes.
    Connect the iPad to your PC and launch iTunes. Right click on the iPad name on the left side under "Devices" and select Transfer Purchases from the pop up window. Then sync one more time. Then after that, right click on the iPad name again and select - Backup. After that process completes then you should be OK.

  • I have a 2011 mini with usb connector when I attempt to connect my nano I get the message that I do not have the correct adapter cable. I got the correct adapter cable from the Mini dealer. Any suggestions?

    I cannot get my Mini Cooper to sync up with my nano thru the USB port. When I hook up with the cable that came with the Nano, it acknowledges that it is an Ipod however it displays the message that I do not have the correct cable.  When I use the audtio adapter cable from BMW it doesn't see the Nano at all. Has anyone else had the issue and what did you do to over come it  I tried my nano in another persons car (a Ford) and it worked with no issue.

    This can sometimes be the result of a faulty/damaaged USB sync cable.  Do you have another cable you could test it out with?
    B-rock

  • I Get the message that FIreFox needs security updating but when I try to download it, it just runs forever and doeesn't complete the download . I tryied several times but it just keeps running. I have an eMac PS10.4.1.1 Thank you.

    There is not much else to add. It works fine except for the update strongly suggested by Firefox. It gets stuck on Connecting to the Update Server and stays there until I Force Quit it.

    This issue can be caused by corrupted cookies or cookies that are blocked.
    *check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Apple AirPort Express - HP LaserJet M1120 won't print entire document

    Hi, My first post.  I've recently purchased Airport Express and installed all necessary programmes (incl. Airport Base Station Agent and Bonjour print service) on my Win 7 Ultimate x64. The device is set up as "Join a existing network". Airplay works

  • Instablility of Forms 10.1.2.0.2 after JRE 1.5.0_11 install

    Hi I recently reported a problem with focus to oracle support. The advice from them was that the problem was fixed in JRE 1.5.0_11. I installed on 2 pcs the new JRE and have found that forms no longer run on either pc. Oddly the behaviour is differen

  • The slideshow feature in iphoto 9.5.1 not working properly

    The slideshow feature in iphoto 9.5.1,does not start at the first slide no matter what I do

  • Doesn't loop a while(true) !!!

    I made an Client Chat applet, but for some reason it doesn't do the read/write part to the socket that happens while(true)!!! Well, actually it doesn't even load the screen! I mean the layout... As you can see, wrote some System.out.println() to see

  • EM12c: OS Command job stopped, not being rescheduled?

    This morning I had an OS Command job running long (normally < 10 seconds, this time over 20 minutes). This job is scheduled to run every 10 minutes, so there were 2 skipped executions. As with similar jobs, I stopped the run, expecting it to be resch