I have both Apple and Android devices. My Android devices will not stay connected to wireless . I have the Airport Express. The Android devices are a Galaxy S4 and Tab 3. These both worked perfectly on my ancient Linksys WRT 120 N wireless router.

I have called Apple support twice and no one can confrm or deny as to whether Android devices can connect with the Airport Express. I have had the it configured 3 times so far and my Galaxy S4 and Galaxy Tab 3 7.0 are useless with the Airport Express.

BTW what did you mean by using my old wireless router as a AP? 
Every Wireless router ever made is actually made of two components..
A router and a wireless AP. (AP = Access Point).
To use any wireless router as a AP you simply bypass or turn off the router..
In an Apple router this is called Bridge mode..
In many routers it is known as AP or WAP mode.
But often they do not have the option..
Set it up manually.. we call this WAN bypass as it will bypass the router.
So what you do is open your wireless router setup page in your browser.. go to the LAN setup page.
You need to do two things.
1. Turn off the dhcp server.
2. Set the LAN IP to match the main router..
For instance if your plug it into your apple router and it is at the default IP.. 10.0.1.1 then set the Linksys to 10.0.1.254
The Linksys is then updated.. Plug the ethernet cable from LAN port apple router to LAN port WRT120 (not WAN)
Now with a computer plugged into the apple router or into the Linksys .. by ethernet.. open the IP address you just set.. go to the wireless tab in the setup and give the wireless SSID a suitable name for your other (non-apple) products.. voila.. you have now turned a wireless router into an AP.

Similar Messages

  • Iphone will not stay connected "invalid response received from the device."

    I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
    I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
    Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
    Thanks in advance for anyone who can help!

    Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
    -I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
    -I add them to the "ringtones" section under "Devices"
    -ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
    -I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Why on Earth could this be?

  • My iphone 4s and my ipad both will not stay connected to wifi since the latest update ios.6

    my iphone will not stay connected to wifi since the ios 6.0 update

    Hello DickChris,
    The following article provides some useful troubleshooting steps and information that can help establish and stabilize Wi-Fi connections on your iPad.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • IPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal

    iPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal. I have to keep joining the network or restarting devices or forgetting network and rejoining it.  As a side note my 1st gen iPhone which I upgraded to iPhone 5 yesterday always stayed connected!

    The steps to try would be to:
    1. Restore the iPhone to Factory.
    2. If that does not solve the problem replace the iPhone.
    If Verizon is offering to replace the iPhone for free under warranty I would go with that option.

  • HT4528 I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    Iran uses GSM, so the iPhone 5 will work.  It is already unlocked.  Just put local Iranian SIM in phone. 

  • I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

    i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

    My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

    Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
    OpenWEP (insecure) or WPA2(AES) is the only secure standard.
    ..WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots
    Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
    If your still having trouble after this, take both machines back to the store for a free evaluation.

  • TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

    I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • IMac and Mac Book Pro will not stay connected to WiFi on TC

    Hi,
    I'm a new Mac owner, and I changed completely over to Apple over the weekend.  Have na iMac and Mac Book Pro with a 2 TB Time Capsule.  Hooked everythng up and all seems to be working, except everytime my computers go into sleep mode when I wake them up they ask me to select my wireless network again because I lost connection.  Once I select my network it works fine until the computer goes to sleep.  WhenI wake it up, it asks me again.  I have it set to automatically connect to known networks, but it doesn't.  I have to click on it everytime I wake up the computer.  Before I hooked up the TC, I was using my old wireless router and it stayed connected.  Now that I put the TC in as my wireless neteork it asks me to select my network.  Is there something I'm not doing that may help the iMac and Mac Book Pro stay connected?
    Thanks. 

    For that particular WiFi update, yes - it means you can't download it. However, that update may have been included already in M-L 10.8 ...
    I feel your pain regarding these anomalies - I had the same problems on my year-old iMac that I just exchanged with Apple for a new one - I had worked these software/network issues on the old one for over five months, and finally, I demanded a new system as a replacement. Just too many problems. For me, Update 10.7.3 for Lion was the cause of my network problems. The WiFi update/patch solved the sleep issue for me, but not the auto-connect problem for system start-up's and restart's. After system start-up's and restart's, I would have to manually select my router address to connect via WiFi. But after manually selecting the address, the WiFi connection would stay-on - it wouldn't drop-off.
    Again, with this replacement iMac, I don't even trust its WiFi capability - and with a desktop, why should I ? I simply purchased a Cat-6 Ethernet cable, and wired it into my Time Capsule ... To heck with WiFi ! ... Remember: don't download ANY system updates wirelessly ! Don't do it. ... Apple will rue the day they did away with Ethernet connectors on their computers ... - The same goes for CD-based software, or at least some other "physical" means for software installation ...
    But, as for future system updates, and how they affect this new iMac ? - If they screw it up, I'm not messing with it ! - Apple's getting it back, the next day ! I'm not going to go through five months of testing, repairs, forced new purchases, etc. etc. ever again ...

  • HT201263 I have restored my iPad (first generation without retina display) and it finishes restoring software but will not stay on for me to restore the data and then shuts off whenever I try to turn it on. I don't believe that it is charging! HELP!

    Long story about what happened but basically I was using the iPad (first generation without retina display) to watch TV at one point it had 20% battery so I plugged it in then it wasn't charging and I didn't realize so it got to 5% and shut off. I plugged it in to charge it but it just kept shutting down and showing the apple logo, then briefly showing me my home screen before shutting off again. I waited a while to see if it would charge, while it continued to turn off and on by itself. Finally, I unplugged it to see if it had gotten any charge but it just told me to plug it in again. I plugged it into a different charger, same thing. I decided to try connecting it to a computer and it stopped turning on but it did not seem to charge. I tried restoring it as it said in the article. It worked until it got to restoring the iPad from the backup that I had because it immediately shutdown before I could continue. I tried to restore it a second time but still it shut down! I'm so frusturated and I cannot afford to get a new iPad, I need it for school and there is no Apple store for 80 miles nor do I have any insurance or warranty on it! (Obviously considering it's the first iPad to ever come out.) I really don't know what to do! HELP

    Try this Support Article  >  http://support.apple.com/kb/HT1808

  • Update 10.8.1 and my magic mouse will not stay connected

    I have just updated both my MacBook Pro 17" and my iMac to Mountain Lion 10.8.1.
    Almost immediately, my Apple wireless 'Magic Mouse' disconnects after a minute or two of use from either/both computers and will re-connect with a few clicks when this happens.
    Prior to updating I never had this problem with either computer or either mouse.
    Both of my 'Magic Trackpads' work properly with no disconnects.
    I have turned off each Magic Mouse, tried one then the other however there appears to be no solution to this problem.
    I have concluded this must be a result of the update to 10.8.1.
    Any ideas or potential solutions will be welcomed.

         I've also been experiencing similiar issues since updating to 10.8.1 on my newer model 13" MacBook Pro.  The wireless mighty mouse I have will initially work with my computer, but then after a seemingly arbitrary (short) amount of time, I lose bluetooth connectivity although my MacBook Pro still shows me as being "connected" to this device.  At times the issue will resolve itself, but more often than not it requires a complete restart to remedy.
         On a possibly related note, has anyone else noticed that the bluetooth icon in the toolbar, when clicked on, results in the infamous Apple pinwheel alot since the update as well?  I wonder if this is somehow a related issue?
         I went into an Apple store about the mighty mouse connectivity issue and couldn't get a solution.  The diagnositics all checked out.  Store representative told me that they could take it over night to do a more thorough checkup, but I wasn't ready to part with my laptop over this issue...just yet.
         Anyone with answers, please help. 

  • My ipod will not stay connected to my computer.  When first plugged into the usb port, I can see it as a drive.  Within seconds it disappears.  If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

    When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears.  It can be seen under devices but as a yellow triangle with an exclamation point in it.  If I run trouble shoot, it states windows is disconnecting this device. 
    I can see it in itunes as a device.  However, this is a brand new computer, running windows 7.  My last one bit the dust in mid use.  I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
    Any help would be greatly appreciated.

    Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
    Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
    If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
    Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
    Anyway, just hard reset your iPod, so that we can start from scratch
    1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
    2. Connect it back to your Notebook or Desktop.
    if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
    Good luck!

  • Updated to IOS6 and 2Wire AT&T Internet will not stay connected

    The phone will recognize 2wire from AT&T - however after about 3 seconds a "login" page shows up (much like the ones you get when connecting to hotel wifi) and takes me to an apple web page that says "sorry the page cannot be found"

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • HT204409 iphone 4s will not stay connected to verizon mi-fi 4510L device

    iphone 4s will not stay connected to verizon mi-fi 4510L device

    Reboot your router by removing all power from it for about 15 seconds.

  • TS3253 My Iphone 4S version 6.1.1 will not automatically connect to my bluetooth in my car.  It is paired and registered with the car bluetooth, but I have to select the device each time the car is started.

    My IPhone 4S with version 6.1.1 will not stay connected to the bluetooth in my 2012 Subaru Outback.  The phone is paired and registered with the bluetooth in the car, but each time the ignition is turned off the phone loses connection with the bluetooth and I have to select the device again.

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

Maybe you are looking for