I have cancelled my CC membership but now when I want to open PS CS6, I get a CC box saying 'Renew my Subscription'. My CS6 is nothing to do with CC

Hi,
I have cancelled my CC membership but now when I want to open PS CS6, I get a CC box saying 'Renew my Subscription'. My CS6 is nothing to do with CC and I cannot use it! It's my work copy! Please help Adobe!
I have gone into Adobe Installers: nothing there to uninstall CC. Gone into Adobe Air, nothing in there to do with CC. How can I completely unlink my computer from any old remnants of CC? This is my work computer. It has to be sorted!
Thanks.

You might want to run the cleaner to remove all info.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up!

I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up! All my mums work is on there for her job and now she cant use it! I need help fast!

If you updated from 2003 that must be on a Windows machine, can you recover them from there?

Aperture crashed on me, then it did a rebuild but now when I try to open it all I get is the message: Warning.There was an error opening the database for the library "/Users/[Folder name]/Pictures/Aperture Library.aplibrary".Only option is to press 'Quit'

I'd be grateful for any suggestions as to how I can re-open Aperture again. It has been increasingly flaky recently and this isn't the first time it has done a rebuild but is the first time it has failed to start up. Most of my photos are referenced. Many thanks for any help you can give.

Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries.

I have just updated my mac but now I am unable to open my itunes can someone help me please

I have just updated my mac but now I am unable to open my itunes can someone help me please

This worked for me:
1 Go to the finder menu bar at the top of the screen
2Click go
3 click applications
4 go down to iTunes and right click on Show Package Contents
5 open contents folder then go to mac os folder
6 open the terminal marked iTunes in that folder
This should force it to open and function enough, it will not allow importing of music from a desk top

I have just updated my ipad to 7.0.2 but now when I want to watch a download on BBC IPLAYER when I am off line it will not play the download. I can only watch the download when I am on line

I have just updated my ipad to 7.0.2 but now when I want to watch a download on BBC IPLAYER when I am off line it will not play the download.
I can only watch the download when I am on line . The funny thing is I can watch it then if I turn off my modem untill I shut down my i pad . Before the update I didnt need to be conected to watch my down load . Can any one help please ?

Here you are "the strange draft logos"...

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialog box so large I can't get to the eject card button. I have to force quit Aperture. How do I fix?

I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialogue box so large that I can't see the eject card button. Consequently, I can't get rid of the dialogue box without having to do a force quit on Aperture. How do I fix?

I can drag the dialog box, but I can't move it up far enough to get to the eject card button. The dialogue box contains all the jpeg Numbers I am trying to upload. It has never done that before. It used to be just a smal dialogue box with no jpeg numbers in it.
It is even difficult to get to the Finder with the Dialague box is open. I have to force quit aperture.
Any ideas would be appreciated.

HT204053 I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

Yes that makes sense, however have you updated it at My Apple ID before trying to change it in your system preferences > iCloud settings, you must do that first.

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

Did you rent the movie on your iPad? Are you trying to watch it on your iPad?
Do you have WiFi connectivity when trying to start viewing the movie?
You should have answered "yes" to all the above. If not, that is probably the source of your issue.

Hey, I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code

I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code is error: 213:19. Does anyone seeing this please have any advice on what to do?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

I have cancelled my CC membership but now when I want to open PS CS6, I get a CC box saying 'Renew my Subscription'. My CS6 is nothing to do with CC

Similar Messages

Maybe you are looking for