I have one flash pause and 4 flash red light.

The blackberry will not turn on. I have it plug it into my laptop and it will not recognize it. The screen stays black. I have tried running jl_cmder v1.9.3. It just comes up with a black screen and it goes away. I'm running Windows XP. Any help that would be great. Thanks

Hi:
Please see the troubleshooting guide at the link below.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00368814/c00368814.pdf
There is a section that explains the beep codes and the suggested course of action to repair.

Similar Messages

  • Flashing red light on my ACS 4.1

    Hello, I have a flashing red light on my ACS. I have searched on Cisco.com to see what this meant and how I can fix it. I am aware that it is a critical error on the system health for my ACS. But what exactly does that mean? How can I figure out what is the problem before it becomes a big issue. Any help is well appreciated! Thanks!!

    Hi,
    Flashing amber LED does not always point to fault. Please see this bug related to system
    LED flashing amber.
    CSCsh44884 Bug Details : Appliance: No Troubleshooting for System health LED
    Status: NEW
    Symptom: The appliance hardware has a "System health LED" that may go into amber status,
    to indicate a hardware warning, and red to indicate a hardware failure.
    Conditions:
    In most situation the ACS appliance is still operative, when the light is in amber status.
    The appliance should offer better information on what condition caused this alarm, and include this either by new CLI command, or included as additional information in pakage.cab file.
    .Workaround:
    -Reload appliance
    -Verify enviromental conditions (temperature, power)
    Alternate Details:
    Symptom:
    The appliance hardware has a "System health LED" that may go into amber status, to
    indicate a hardware warning, and red to indicate a hardware failure
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&b
    ugId=CSCsh44884
    Let me know if you have any question.
    Regards,
    ~JG
    Do rate helpful posts

  • Is there a way to have one flash player play all moives on a web page ?

    Hi,
      Is there a way to have one flash player play all movies on a web page ?   For example, you have a list of FLV movies on a page and you click on any them and it will play on the same player on the web page. Or does each movie needs it's own ?
    Thanks in advance..
    Peter

    Yes, for the design I made, the movies are loaded from the server.  Here is the code for the design.  It is done using AS2, and the stage includes two buttons (s1, s2) for playing the individual videos, one button to play them both (playall), one after the other, and the video object (video1_video) that was added via small menu you find at the top of the library panel's frame.
    I cannot say this would work directly for your implementation, but it gives you some things you can look into so that you can figure out how.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    // ignore whatever code is above this... the forum added it, not me  
    stop();
    ncount = -1;
    var connection_nc:NetConnection = new NetConnection();
    connection_nc.connect(null);
    var stream_ns:NetStream = new NetStream(connection_nc);
    stream_ns.setBufferTime(3);
    stream_ns.onStatus = function(infoObject:Object) {
            for (var prop in infoObject) {
                   if(infoObject[prop] == "NetStream.Play.Stop" && ncount == 0){
                       video1_video.attachVideo(stream_ns);
                       stream_ns.play("20051210-w50s.flv");
                       ncount += 1;
    playall.onRelease = function(){
          ncount = 0;
          video1_video.attachVideo(stream_ns);
          stream_ns.play("barsandtone.flv");
    s1.onRelease = function(){
          video1_video.attachVideo(stream_ns);
          stream_ns.play("barsandtone.flv");
    s2.onRelease = function(){
          ncount = -1;
          video1_video.attachVideo(stream_ns);
          stream_ns.play("20051210-w50s.flv");
    I don't deal with video very often, so I have not created an AS3 version of this.

  • After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    Regarding your new Guest Account.
    If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
    The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

  • Bold 9930 - dead and flashing red light

    Bold - Verizon 9930, died with flashing red light, non-responsive. Can connect wtih loader, re-loading latest OS for Verizon (7.1.0_rel1737_PL5.1.0.429_A7.1.0.580_Verizon_Wireless) Load fails with "application loader was unable to connect with your device" when it tries to connect with the JVM. I have tried:- fully charged known good battery (tested in another 9930)- wiping device- start without battery, insert battery when JVM message comes up- both BB desktop and Loader directly- two different PCs (no change)- different USB ports- older version of BB OS for device- many, many iterations... All end with "application loader was unable to connect with your device" Is the device scrap?  If so why?  It's not even 2 years old, out of warranty, and apparently now totally worthless.  This one is the CEO's Blackberry, and he's not happy...  If I can't resolve this, it will be the very last BB to ever see the inside of our company.  This is the second 9930 to die this way in the last 4 weeks.    

    Hello,
    Firstly...
    truckin-on wrote:
    Does RIM care about these failure issues at all I wonder?
    If you were hoping for a response from RIM, you have misunderstood the purpose of these forums. These are not a channel for any communications with, support from, nor escalation to RIM for anything. Rather, these are a user-to-user community of volunteers trying to help each other out amidst their own busy lives. So patience perhaps would be a good thing to have...
    Nevertheless, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    While you've already validated that your battery is good, I don't think you've tried the first part of this test:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    While perhaps redundant to what you've already attempted, here are a few more things to try:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Since you are out of warranty, your next step I suppose would be to seek in-hand support from a qualified technician to give you a proper diagnosis. Doing such at this internet distance is quite a challenge and therefore cannot replace in-hand evaluation and diagnosis.
    Good luck and let us know!

  • My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    A 2nd gen shuffle is about six year old at this point.  The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge.  The initial green light shows a good charge.  The red light means the battery is drained.
    Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle.  The Restore button is on the shuffle's Settings screen in iTunes.  This will erase the shuffle, re-install its software, and set it to default settings.
    Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds.  Then, turn it back ON.  This resets the shuffle.  Does it play again?  If it does, let it play until it no longer plays again.  Repeat turning it OFF and ON until it no longer plays.  Then, connect it to power and charge it to full.  See if that makes any difference.
    If that does not help, the solution is to replace the battery.  If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
    If you are good at such things, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Shuffle

  • My Curve won't turn on and no sign of flashing red light

    Hi!
    I m all new to this blackberry forum thing....anyway i have a blackberry curve and all of a sudden yesterday it just stopped working. when i looked at the phone the screen was all white so i took out the battery and put it back on thinking that it will come back up but it didnt. Then i took the battery out again and plugged it to the USB(without the battery) because ususally it comes back up, but it still didnt. i put the battery again and plugged it to the USB thinking that it needs to charge but still no since of that flashing red light. I took the battery out and put my friends battery (cos he has a curve too) but still it didnt work. I did try holding down the power (red)button still not back on. 
    I just dont understand whats wrong with it, its not like i dropped it in the water or dropped it on the floor. I didnt do anything to it. It just stopped working. 
    Im really frustrated right now...I just dont know what to do..i hope someone can help me
    THanks!

    I finally got my curve to work.  I just left it on the charger for a while and then it powered up. It seems if its a little low on power and I don't charge it relatively soon it shuts down and won't power up for awhile. I've also updated the software and cleaned out the junk files. It seems to be working fine now, go figure.
    tm

  • The ATT man says I am connected to the internet but I still have a flashing amber light

    The ATT uverse man says I am connected to the internet but I still have a flashing amber light. Any suggestions?

    Does this mean that the Time Capsule is connected to the Internet but it has a flashing amber light?.....or.....does this mean that the Time Capsule is not connected to the Internet and it has a flashing amber light?
    If you are using a Mac, we need to know what operating system you are using in order to provide troubleshooting advice.
    If you are not sure what operating system you are using, click the Apple icon in the upper left corner of the screen, then click About This Mac.
    Please post back with the OS X Version number that you see there.

  • I have one apple ID and multiple family members share this with their devices.  How do we keep pics and messages separate?

    I have one apple ID and multiple family members share this with their individual devices.  How do we keep pics and messages separate for each device?

    For messages
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    For other issue:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • Apple IDI am trying to update my IPAD and it gives me a message when I put my email address in:The apple ID is already being used?? I set my Iphone up yeasterday and I only have one email address and one account how do I use it for all my devices?

    I need some help I set my IPhone up yesterday and now I am trying to set up my IPad but I only have one Itunes account and one email but the IPad error message states "The apple ID is already being used" I dont know how to get passed this and my family and I only have one account and we all have IPhones now I dont want them to update if we cant all use the same account. Please help with ideas!!!

    Try here:
    http://support.apple.com/kb/HT4895
    Apple IDs and iCloud)

  • Hello,i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i am also having the same problem.....but there is no solution i am stil waiting for the responce of apple adviser.

  • I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    i plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    Hello there, Shellywms09.
    The following Knowledge Base article points out why you are receiving that message on your iPad:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • I have one blackberry id and two blackberry's but can only receive e-mails on one device!

    Hi all,
    I have a problem! I have one blackberry id and two blackberry. I have given my old blackberry to my wife.
    I have just setup my new phone but whilst setting up my e-mails on my new phone we have noticed that the e-mails have been transferred to my new phone but have stopped working on my old phone.
    The odd thing is my wife had a previous blackberry and we were able to both get the company e-mails on each phone.
    The message that appears when e-mails have been transferred to the new phone is there is another device registered to this blackberry id and only one device can receive e-mail.
    How can I unregistered my old phone from the blackberry id and re-register it under my wife's details and hopefully receive the e-mails on both phones?
    Please help as its vital for the business.
    Cheers Nick

    Hi woodbe and welcome to the BlackBerry Support Community Forums!
    The BlackBerry ID is only designed to work on one device at a time. Your wife can sign up for a new BlackBerry ID by going to www.blackberry.com/blackberryid.  Also, to receive email on her device, she will have to have a BlackBerry data plan configured with your wireless network provider as well.
    To change the BlackBerry ID on her device, you can back it up using the BlackBerry Desktop Software, then perform a security wipe from Options>Security.  Upon the reboot, sign in with the new BlackBerry ID, then you can restore the data using the BlackBerry Desktop Software again.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I have one apple account and one apple ID.  I have several devices under that ID.  Why when I download and app on one device it goes on all devices?

    I have one apple account and one apple ID.  I have several devices under that ID.  Why when I download and app on one device it goes on all devices?

    Click here and use the instructions to turn off the automatic downloads.
    (104598)

Maybe you are looking for