I have the Canon Pixma MG3200 which isn't listed anywhere. I scanned 1 page and then it quit working

As I said in subject line, the scanner on my printer quit working after scanning one page. There were no messages telling me of an error and the scanning screen didn't come up even when I scanned the one page. PLEASE HELP!

Hello Shelia,
So that the Community can help you better, we will need to know the version of Windows or Mac in use, as well as if you have the printer connected via a USB cable or wirelessly.
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Similar Messages

  • I have an epson workforce 600 which is not listed as airprint enabled. has anyone made this printer work with airprint?

    i have an epson workforce 600; it is not listed as one of the printers that is airprint enabled.
    has anyone made it work with airprint? if so, please tell me how.
    thanks.

    The Workforce 600 is not AirPrint-compatible. Epson has an app that enables printing to some of their other wireless printers. Search the iTunes Store or look to the support resources for your model of printer. Third-party printing apps such as PrintCentral are also available. All such apps have limitations, so check them out thoroughly before you pay for any such app.
    You could also route the printing through your computer. If you have a Mac, Printopia would be worth a look. Fingerprint is another option that is available for both Mac OS X and Windows system. You could also consider an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    Regards.

  • Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work?   thank, Ric

    Is there a way to print from ipad 4 to a non AirPrint printer?
    I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
    Is there an app for this or adaptors which could work? 
    Thank, Ric

    Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
    Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
    Canon Easy-PhotoPrint
    Canon Mobile Printing
    PIXMA Printing Solutions

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • I have a WRT54G ver 7 which isn't in the download list?? Is it AOSS compatible?

    I have a WRT54G ver 7 which isn't in the download list ?? Is it AOSS compatible?

    Check the firmware on ftp://linksys.com/pub/network  ...... download the latest firmware & upgrade the router ....

  • HI, I have a Canon Pixma MG5250 printer and it doesn't seem to recognize iPhoto. All my photos are in iPhoto but I can't access them when the printer's 'photo print' box comes up.  Any suggestions? thanks

    Hi,
    I have a Mac OS X version 10.5.8
    I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
    All other aspects of the printer such as scanning and printing documents are working.  When I open the printer's
    'photo print' box on my Mac, it cannot access iPhoto. 
    I would really appreciate any feedback and suggestions as to what to do.
    thanks.

    If you want to print a photo that's in your library you should do so from iPhoto.  Select the photo, crop to the size you want to print and type Command+P to start the print process.  In the Print window select the paper size and print size, printer and then click on the Print button.
    OT

  • I have the latest mac desktop  op mountain lion,plugged in the canon pixma ip90v and get a message drawing too much power from usb and it won't work?

    I cannot get the canon pixma ip90v to work with the computer.I get a message about drawing too much power from the usb.

    You need to plug in the power cord that was included with the printer and then use it with USB, or use the power cord included with the printer and access it wirelessly from your iMac. I access my Canon MP560 wirelessly from my iMac, which works well. 

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX  processor.

    I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC  OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help  thank you   Allan R

    So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
    I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 -  Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
    So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

  • Where can I find a tutorial for the Canon Pixma MG6220

    I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????

    I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner.  I find this manual has too much content and I cannot find what I need (like almost every web page!). 
    We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
    But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
    I also find it hard to navigate these community pages! What is tagging?

  • How's the Canon Pixma MP960?

    Anyone have good or bad experiences with the Canon Pixma MP960? I'm seriously considering it. Especially interested in how well the scanner works.
    I've been having problems with my HP 7410 cutting off scans when I use the ADF, so I'd appreciate any advice or comments you can offer.
    Thanks in advance,
    /rb

    Looking at the specs an the Canon Aus web site, this model doesn't have a document feeder. And it also doesn't have fax, which you mentioned in your wish list in a previous posting. So I don't know if this changes your interest in the 960?

  • I have a canon pixma mx360 all in one printer and it won't print

    my printer won't print I just replaced the ink. I tried to trouble shoot the printer, and it said that I had a printer error in the que.
    I cleared the que and it still won't print. can you please help me figure this out? my printer is a pixma canon mx360 all in one
    ink jet.

    Hi wendasa,
    If you have any antivirus or firewall programs on your computer, please temporarily disable them and then try to scan again.  Sometimes these programs can block the scanning process of the printer.  If you are still unable to scan, we can try scanning using the Microsoft Paint program to see if the scanner function of the printer is working.  To attempt to scan using Microsoft Paint, please follow these steps:
    1.  Launch Windows Paint by pressing the Windows Key+ R, then typing mspaint, then clicking OK.
    2.  Once inside of Paint, in the upper left corner you will see a blue square; please click on that and select FROM SCANNER OR CAMERA.  A window will appear asking you what device you want to use.  Please select the PIXMA MX360, then press the OK button.
    3.  In the next window, you should have the option of selecting a document type; please select one, then press the SCAN button in the window.
    Are you able to scan using Microsoft Paint?
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a Canon PIXMA MX870. Turning it on I get a code: B200. Tried shutting down & restarting, same

    I have a Canon PIXMA MX870. Turning it on I get a code: B200. Tried shutting down & restarting, same error msg.

    We have the same problem.  I think it has something to do with the printhead.  We found reference to this problem and suggested fixes under the model MX850 on this forum.  One person suggested soaking the printhead.  Yikes.  We barely got much use out of our printer before this happened.  Very frustrating. Husband tempated to buy an Epson today.
    Here is the solution offered on another message in this forum:
    puskas
    New Contributor
    Posts: 2
    Registered: ‎07-16-2013
    Re: Error Code B200
    Options 
    ‎07-16-2013 01:43 PM
    Same for me. I looked elsewhere and found other solutions. I soaked the print head in warm water until it ran clear. Dried the unit for 15 hours, unplugged everything. Reinserted the printhead, ink cartridges, power cord, USB connection. Started unit and it worked. How long, I have no idea, but it saved me some money

  • I need to reinstall acrobat 9 after having my mac hard drive wiped. I have the serial number but there isn't a download link on the adobe website

    I need to reinstall acrobat 9 after having my mac hard drive wiped. I have the serial number but there isn't a download link on the adobe website

    well PhillyPhan, I can't tell that you're better looking just by your iphoto icon, now can I? Although it is a lovely sunset you've got there.
    Thanks for your response to my question, I see your point and will do that, however, I have another folder that was created before I had a Mac, which has all sorts of lovely titles and labels and some of those pictures I brought over to my ibook when I first started. So there are some duplicates in my iphoto library that I already have backed up in that other folder. I guess I shouldn't really obsess about those. I guess I am just nervous about deleting all my prior iphoto library, but I should have faith that it will all be there in my pictures library. Just trying to clean up the virtual mess.
    I'll hold my breath and take the plunge.
    Thanks!
    ibook G4    

  • I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card,

    I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card, I get the following error:
    "You need permission to perform this action" and below that:
    "You require permission from the computer's administrator to make changes to this file".
    Printer is set up wireless.
    I am signed on as administrator, can't get access with any user account.
    The old problem ridden HP Photosmart I replaced, I could change, delete, etc. without issues.
    Solved!
    Go to Solution.

    hi ehnco,
    It sounds like the Read/Write attribute on the printer needs to be changed.  Use the following steps to change the read/write attribute:
    Make sure that the machine is turned on
    Press the <Setup> button.
    Use the   button to select  [ Device settings], then press the <OK> button.
    The Device settings screen is displayed.
    Use the  button to select [Device user settings], then press the <OK> button.
    Use the  button to select [Read / write attribute], then press the <OK> button.
    Use the  button to select [Writable from LAN PC], then press the <OK> button.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • Basic voltage measurement, with Meter, Relay, and Load. How do I make it work?

    Hello, I have LV2010, and I am controlling a Meter, Relay, and Load. Here is what I need.  Please give me any crazy idea that you can think of to explain why this will work all day and then after shift change it hangs, and locks repeatedly. I have lo

  • ASM BEST PRACTICES FOR 'DATA' DISKGROUP(S)

    In our quest to reduce operating costs we are consolidating databases and eliminating RAC in favor of standalone servers. This is a business decision that is a certainty.  Our SAN has been upgraded, and the new database servers are newer, faster, etc

  • XIF response, change standart response

    Hello, Starndar XIF responce has looks like <h6> <?xml version="1.0" encoding="UTF-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <rfc:CRMXIF_PARTNER_SAVE.Response xmlns:rfc="urn:sap-com:document:sap:

  • Omni graffle doesn't open .vsd documents.

    I get sent a lot of visio documents that i need to open at work. all of them have the .vsd extension but i downloaded the trial versions of omni graffle (standard) and omni graffle pro and with both versions, i get an error stating omni graffle can o

  • Workflow jobs work only once

    Hello, I have created a very simple workflow process (start -> some_mapping -> end), assign a calendar to it and deploy the process to Oracle. After that I monitor the corresponding job using Enterprise Manager. I have found that the job is running a