I have to average data of 1min and then log into text file

For my application i have to average data of 1min and then log into text file. please guide me on this . To transfer the data i am using notifier.
Prashant Soni
LabVIEW Engineer

hi prashant,
Check this attachment..I just implemented my idea in this one.
Thanks and regards,
srikrishnaNF
Attachments:
Example_VI_BD.png ‏12 KB

Similar Messages

I'm getting a MacBook pro for college and just wanted to make sure I was correct on how to transfer everything to it such as iTunes. All I have to do is turn on home sharing and then log into iTunes on my new Mac right?

I'm getting a MacBook pro for college and just wondered how to transfer/share everything from my desktop pc to my Mac?

home sharing will work but won't transfer playcounts, ratings, and original "date added".
if you wish to keep those, use the instructions in this article here.

How to do a clean install go yosemite and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

How to do a clean install of yosemite (have Mavericks 10.9.5 now) and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

Do a backup before doing anything.
If you want to make a clean install of Mountain Lion, boot into the Recovery Volume (command - R) on a restart, use Disk Utility to Verify/Repair the disk and run Repair Permissions. Then erase the hard drive using Mac OS Extended (Journaled) format using the Options button. Reinstall Yosemite. Restart normally and test. Use Setup Assistant or Migration Assistant to import what you want.
Clean Install

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7) The window don't open or they are there and only in an outline, kind of like they're behind the screen. I have also done a system update and then a syst

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I have updated my ipad4 to ios7 and then I couldn't find my personal hotspot option.... Please please please help me to get back .... I really need help

I have updated my ipad4 to ios7 and then I couldn't find my personal hotspot option.... Please please please help me to get back .... I really need help

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Personal Hotspot should be at Settings > Cellular Data > Personal Hotspot

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

BPEL or OSB for reading data from db and then writing to another db

Hi All,
I have a requirement of reading the data from a table in one database and then writing into the table in another databas.I dont need any transformation on the data.
I understand that i can do this by creating a BPEL process with DB adapters.
Is there any better way of implementing this.I am new to OSB and If need to use OSB, then how can we do this in OSB and what are the advantages of using OSB over BPEL in implementing this.
Thanks,
ashok

probably it would be much easier to develop everything in JDeveloper using DBAdapter.
You can run it inside SOA Suite, but you don't even need BPEL, just use Mediator.
Otherwise you can export all the JCA and WSDL and XSD paraphernalia from JDeveloper and import into OSB, it should run smoothly.
How do you trigger the transfer? Polling the DB to look for new rows?

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

After update I am no longer able to open email attachments by just clicking on the attachment. I now have to click control and then click open linked file. How can I open attachments by simply clicking on them?

After update I am no longer able to open email attachments by just clicking on the attachment. I now have to click control and then click open linked file. How can I open attachments by simply clicking on them?

Unless you believe middle-click is yours and don't like it being usurped, mine is set globally to "Enter".

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos?

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos? I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

Hey there TowneJ,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
So long,
-Jason

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.

I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

I have to average data of 1min and then log into text file

Similar Messages

Maybe you are looking for