I know the pasword to my ipod 4th generation but everytime i type it in it says its wrong. i tried restoring i but my computer can't handle it. anyway to break in and take away the password without restoring the ipod orgetting a new one?
Please help!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
My itunes songs won't sync to my ipod 4th generation,but my apps are fine. And the songs EVEN play on my laptop. How do i fix this? THANKS!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.
Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.
-
How do I add HD space on one side and take away from the other?
Hi All,
I'm looking for some help and I have faith some people here can assist.
I recently used Apple's Boot Camp to put Windows XP on my MacBook Pro. So, I currently have 1 hard drive that is partitioned into two -- one for the mac, and the other for the PC.
I would like to add more hard drive space on the MAC side of things, and take away from some of the space on the PC side. What is the best way to go about doing this?
I've been told a program like Partition Magic or something might work...but I'm looking to see what people have done in the past and what the most successful route would be. I'm sure I'm not the only one that has done this.
Thanks so much,Hi,
WinClone can do this http://twocanoes.com/winclone/
And in the WinClone FAQs https://www.twocanoes.com/forums/viewtopic.php?t=515 - Section "My current Windows partition is the wrong size, and I want to make it larger. How do I do this?" you find a how-to.
Some payable apps like iPartition and/or Drive Genius also claim to be able to resize.
Regards
Stefan -
i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I have marked some video cuts for removing, and want to activate them again and take away the marking (a red line over the thumbnails). How do I do that?
In the middle tool bar, near the Reject Tool that you used to make the red marks, there should be an "Un-Mark" Tool. Select this tool and you can erase the red marks. It should look like an empty star.
YOu can select "View Rejected Only" to make sure you get them all. -
hi sir i forget my password?for the device but now i know the paasword please help me one chance only
hi sir i forget my password?for the device but now i know the paasword please help me one chance only
-
I got a new ipod touch. my old ipod is a nano. i have an itunes account, but it is very old and i do not remember my itunes account information. most of the songs from my old ipod are not on my itunes account. how can i get all the songs from my old ipod onto my new one?
Transfer non-iTunes purcased music from the iPod to the computer by using a hird-party program like one of those discused here:
Copy music from Ipod to new computer...: Apple Support Communities
Transfer iTunes purchased by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You do have to know the accout(s) ID and password.
The follwing includes how to reset your password.
Frequently Asked Questions About Apple ID -
I got my serial number off the ipod box and it still says its wrong
got my serial number off the ipod box and it still says its wrong
I dont know, the ipod is dead, i got it off the box and it says the serial number is invalid or its a software not hardware
-
My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.
Hi hectorness12!
Thanks for using the Apple Support Communities! I have found an article that can help you with troubleshooting your iMessage issue. The article can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks,
Braden -
Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.
Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed. -
I recently got a new ipod touch. My old ipod nano is synced to a mac computer at my mom's work. And my new ipod is synced to my pc computer at home. Is there a way i can get the songs from my old ipod to my new one?
Copy the music from Nano to computer by:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Then just sync to the new device
iTunes: Syncing media content to iOS devices and iPod -
I accidentally dropped by old ipod in the garage and drove over it. So I bought an ipod nano 7th gen. to replace it. Can I transfer the itunes from my old ipod to my new one? I only have about 30.
AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup. -
I type in the right password for my ipad but it says its wrong what do i do?
i type in the right password for my iPad but it says its wrong. what do i do?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
All the time using password it's say "wrong password. It a get a new one on the ipad2 do a new one it's "wrong password" Help me please
Is this with your iTunes account password ? If so, and if you haven't already done so, then try logging out of your account by tapping on it in Settings > Store and then log back in and see if that fixes it.
Maybe you are looking for
-
On iOS7.0.3 html select tag with attribute 'multiple' crashes Safari
Try loading an HTML page on Safari that has: <div>Multi-Select Picklist- tap on this to crash the iOS app <select id="12121" title="Available" multiple="multiple" size="3" style="width: 120px;"> <optgroup label="Available"> <option value="1">AAAAAA</
-
Macbook doesn't have the right resolution for external monitor.
I have a Macbook Pro runing OS X 10.7.5 and have a HP w1907 LCD monitor. When I have the Macbook open, I can get the proper resoulution of 1440x900 on the LCD while the monitors are Mirrored. But when the macbook is closed, the options for the LCd mo
-
Deleting from Internal table.....
Hi All, I have two internal tables with same structure like: IT_REC_LIST and IT_REC_LIST_DEL. I have 10 records in this internal table: IT_REC_LIST and same 5 records in this internal table: IT_REC_LIST_DEL. I dont have any key fields. So I want to
-
Reusing JAXB generated classes for XSDs included in other XSDs
Hi, I use xsds with jaxb in a number of related projects. To avoid duplication I've factored out commonly used elements into their own xsd in a separate project. I then include these in the xsds that need them. I generate classes with jaxb for each p
-
Can't change printing prefs (encoding:binary) in Photoshop CS3 Mac Intel
Hi My version of Photoshop is in German, so I don't know if the translation is correct... If I open the print preview window (File>Print) and change the print encoding to JPEG, it switches it back to Binary when I press "finish" or "print...". I must