I'm getting repeated prompts to enter my password, but only for calendars

I'm getting repeated prompts to enter my password, but only for iCal. In iCal I see an alert, and when I bring it up I get this:
My other iCloud functions seem to be working fine. I'm iMessaging, etc.

I've seen a couple reports on here, and mine has been down for an hour or more. However, as usual there is no indication of issues on the iCloud status page.
Edit
https://www.apple.com/ca/support/systemstatus/

Similar Messages

  • How do I change my iCloud Account email?  I keep getting prompted to enter a password associated with an old email account I no longer use. I do not have the password for it.  How do I change my iCloud Account?

    How do I change my iCloud Account email?  I keep getting prompted to enter a password associated with an old email account I no longer use. I do not have the password for it.  How do I change my iCloud Account?

    You can't delete an existing account, you can only choose to stop using it.  It will still be there should you decide to use it again in the future.

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • How can we get the prompt to enter IP Address, Subnet Mask , gateway and DNS Server during Task Sequence?

    How can we get the prompt to enter IP Address, Subnet Mask , gateway and DNS Server during Task Sequence?

    This is for 2007 but may still be relevant for 2012
    http://hexdump.net/?p=391
    Cheers
    Paul | sccmentor.wordpress.com

  • How do I stop receiving a prompt to enter a password for a discontinued Account ID?

    I changed my Apple ID a few weeks ago.  I am now getting prompted to enter the password for my old Apple ID on my iPhone 4.  I cancel the request and proceed but it is imapacting my user experience.  I am not having any issues with my new Account ID.
    Thank you!

    That's because you have apps on your phone that were obtained with your old Apple ID. Apps are forever tied to the ID used to obtain them & cannot be transferred to another Apple ID. You have two choices: 1. Delete them & re-purchase with your new ID, or 2. Contact iTunes support, explain the situation, & request they add these apps to the download queue of your new ID:
    http://www.apple.com/support/itunes/

  • TS1389 Repeatedly prompts of authorize this computer but there is no solution for this & it still prompts authorize this computer. Please suggest me another solutions

    i tried above all sugget to prevent repeatedly prompts of authorize this computer but there is no solution for this & it still prompts authorize this computer. Please suggest me another solutions

    Hello Kuldip13,
    It sounds like iTunes keeps asking you to authorize the computer. If you have already tried all the steps within the article you came from:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    I would next check to see if the same Apple ID is signed into, that was used to play these purchases with this article:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I changed my Apple ID and password, but when I attempt to update Apps I am prompted to enter my Password for my OLD Apple ID, and I am unable to override the Old Apple ID. How to proceed ?

    I changed my Apple ID and password, but when I attempt to update Apps I am prompted to enter my Password for my OLD Apple ID, and I am unable to override the Old Apple ID. How to proceed ?

    Delete everything bought with the old Apple ID and buy it again.
    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

  • Help - I turn my Apple air on and get a message asking for my keychain password - I enter my password but it doesn't work.  I've never seen this before.  What do I do?

    Help - I turn my Apple air on and get a message asking for my keychain password - I enter my password but it doesn't work.  I've never seen this before.  What do I do?

    This may help.
    http://support.apple.com/kb/TS5362?viewlocale=en_US

  • Long-story short: when i attempt to sync my iphone with itunes i get a message that i must authorize my new computer.  When I attempt to authorize I get a message to enter a password for an old email address.  Ive forgotten that password!  I

    In attempting to sync my i-phone with my new PC a message appears on the PC that I must enter a password (long forgotten) for an old email address.  I've tried everything I know including trying to reset the password by providing my current email address.  Nothing works.

    If you forgot your Apple ID password - Apple Support
    tt2

  • HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)?  That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both?  Or more?
    I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
    Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details.  The BT email client set-up starts here.

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • HT201210 my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this

    my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?

    Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
    iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

  • Hi, I have sold a phone and the user cannot get past ever Apple ID and password but the password isn't working.?

    Hi,
    I have sold an iPhone 4S, I thought it was fully erased but it wasn't, it had find my iPhone on and the user is being prompted to enter apple ID and password. I went onto Apple account and removed device from find my iPhone and erased. Still says the same thing to the buyer. I have changed my password for Apple ID and then called them and they have entered the password but it doesn't work. Tried the old one that doesn't work either. \
    Any ideas.
    Very grateful to hear from anyone.

    There is never a reason to give someone your Apple ID password.  Period.
    If you've removed the device from the Find My iPhone section of www.icloud.com, then it's not activation locked.  They need to restore the device as new and set it up with their own information.
    Immediately change your Apple ID password and also update your security questions.  You may also want to change the primary email address of your Apple ID.
    iCloud: Activation Lock - Apple Support
    Apple ID: Changing your password - Apple Support
    Change your Apple ID - Apple Support

  • While updating my apps, I lost my wi-fi connection.  I have since tried to update the apps several times...but none of them are updating.  Each time I try to update the apps, I enter my password, but then nothing happens.  Thank you - Chris

    While updating my apps, I lost my wi-fi connection.  I have since tried to update the apps several times...but none of them are updating.  Each time I try to update the apps, I enter my password, but then nothing happens.  Thank you - Chris

    Hold the power button and the home button down until the screen goes black and the apple logo appears. This will do a reset and you should be able to update your apps then.

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

Maybe you are looking for

  • HDTV as second monitor?

    Will OS X use an HDTV as a second monitor? I'm thinking of running Mini-DVI from MacBook to a DVI<->HDMI cable, and from there into the HDMI port of the TV. Any reason this wouldn't work?

  • Time Dependent Info Object

    Hi All, I have an extractor that extracts data with DATEFROM and DATETO fo rthe time dependent HR employee related data for managers. But when it extracts into BI and loaded to Info Object the DATEFROM is not the same as what is extracted, it is 01/0

  • Run Time structure identification of a variable.

    Hi Experts, I have a requirement where i need to identify the structure type assigned to the variable at run time. i.e. if i have the variable name at run time i shold be able to find the structure type assigned in that program. Please help. let me k

  • Blackberry 9320 shuts off and needs to remove the battery to turni it on.

    My BlackBerry 9320 keeps shutting off even if my battery is half full. Is this unit/device related, battery related, or OS related defect? Thanks.

  • Error in TBB!

    Hi I am getting the following error in the system when executing TBB1 - No customer is assigned to business partner 169 in company code 2000 Message no. FTBP023 I have already deleted the integration with the customer/vendor in SPO and I alsothe paym