I'm having problems with my printer

Hello,
I am a basic Mac user, just got my Mac couple months ago.
The only real problem I've had so far is my printer.
I mean I can print, but I can't seem to pull up the printer so that I can scan stuff.
There isn't an Icon that pops up on my desktop or anything.
Maybe it shouldn't pop up? I'm really not to sure.
But I am a student and do need to scan a lot of stuff for school, so if you could give me a suggestion it'd be great!
The printer I have is an HP psc 1350 all-in-one
I've downloaded and installed the proper drivers for it by the way
I also have photoshop if there is a way to scan images into there.
Thanks in advance!
Best Regards,
Nathan Rojas

Well I tried to reinstall the drivers and, still no luck.
I really don't know what the problem is, I really do need a solution though. I could always go out and buy a new scanner but I would really not like to spent that much money on something that could be just a problem that lies right in front of me ya know?
Anyone have suggestions, I'd really appreciate the feed back.
Best Regards,
-Nathan Rojas

Similar Messages

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Having problem with the printer with type "PDF Publisher"

Hi,
We are having problem with printing PDF reports with print style as "PDF Publishrer". The concurrent program errors out after it generates the report. But when we try that with style "PORTRAIT" then it prints successfully. We have tried with a number of printers and a number of reports. The results are same. So my understanding is it has something to do with the printer configuration from the EBS side.
Any help in this regard is highly appreciated.
Pratap

Hi Hussein ,
Thanks for the response. The details are provided below.
The application is R12.1, Database 11.1.0.7, OS is Solaris 10.
The database characterset is US7ASCII.
The printer type is --PASTA Universal Printer Type
The log file does not give any error but the program completes with error. I am coping the log file below.
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RAXINV_SEL module: Invoice Print Selected Invoices
Current system time is 20-JUN-2011 14:23:10
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='10100'
p_trx_number_high='10100'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 96
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10100
MSG-00010: 14:23 1 Transaction: 10100
Report Builder: Release 10.1.2.3.0 - Production on Mon Jun 20 14:23:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 895365 on node PAUPRJ01 at 20-JUN-2011 14:23:48.
Post-processing of request 895365 completed at 20-JUN-2011 14:23:51.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 895365
Number of copies : 1
Printer : SPOT
##################################################################

I'm having problem with my printer the carriage is not moving from si

My printer carriage is not moving from side to side, It's like something not connecting and the light is blinking.

Please review this post and then post some details. What printer model? What operating system? How is the printer connected? Are there any error messages?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Still having problems with dark prints in lightroom and photoshop

Below is a quick comarison of prints out of Aperture on the left and Lightroom on the right.
I have my monitors calibrated and my printer 3800 profiled.
I am not double proofing.
I also put the print adjustment slider to 25 on the lightroom print.
Although the photo below is not an accurate representation you can see the the colors and saturation are compleatly different.
And the one from Aperture matches my monitor!
Now I switched to lightroom because of the rendering of the raw files and the amout of adjustments that can be preformed, along with profiling cameras.
What I am now doing is processing in Lightroom exporting to Aperture to print and load on to my iPad.
Not a great workflow!
Anybody got any suggestions?

What are your print settings? Managed by printer or using a profile in Lightroom? Are you using the correct profile for the paper? What version of Mac OS? Are you using the very latest printer driver for your printer? I.e. more info needed. My prints from LR come out identical in tone to those from Aperture.

Having problems with HP6980 printer and Windows 7, please help

I just replaced my XP computer with a new HP computer running Windows 7. Each time I turn on my HP 6980 printer, it won't print. When I go to Devices and Printers, I see that it is offline. I have to delete the printer and reinstall it to make it work and this solution is only good for the session. I have to repeat the process each time that I turn on the computer. Please help.

Try running this next time you get the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
This should fix the offline issue instead of reinstalling.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer.

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

Hi everyone. I have just started having problems with iCal. Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

Hmmmm.
At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
Click on the Finder icon in the dock
Click on Go > Home
Double-click Library
Double-click Preferences
Look for a file called "com.apple.ical.plist" and remove it to the trash.

Having problem with my hp officejet j6480 all-in-one printer

i am having problem with my HP officejet j6480 all-in-one printer it prints very slow
the operating system is windows 7 32-bits i download full driver software but that did not fix the problem
This question was solved.
View Solution.

Hi - Does it print slowly from all applications or just certain ones? In either case, you can try following the steps in this document.
In addition, try going into Control Panel, Printer, right click on the printer and choose Printer Properties. Click on the Advanced Tab and select Print Direcly to the Printer.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

I am having problems with my 3D preferences, all I can see is "Get more content" and " 3D Print Utilities"

I am having problems with my 3D preferences, all I can see is "Get more content" and " 3D Print Utilities"

That means either your graphics card does not support 3D or that there is a problem with your graphics drivers. See if your GPU maker has an update.
Error: "Graphics hardware not officially supported for 3D" | Photoshop CC, 13.1

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
Skip

I am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
   My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
   2014-11-13 QuickLookSatellite crash x2
   2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
   Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
   Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
   Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
   Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
   Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
   Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
   Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
   Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
   Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
   Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
   Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
   Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
   Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
   Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
   Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
   Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
   Dec 1 20:08:30 jnl: disk3s2: journal replay done.
   Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
   Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
   Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
   Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
   Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
   com.cisco.kext.acsock (1.1.0)
   com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
   com.cisco.anyconnect.vpnagentd
   com.oracle.java.JavaUpdateHelper
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.wdc.WDSmartWareService
   com.oracle.java.Helper-Tool
   com.adobe.fpsaud
   com.wdc.SmartwareDriveService
Agents
   com.adobe.AdobeCreativeCloud
   com.zimbra.desktop
   com.citrix.ServiceRecords
   com.google.keystone.system.agent
   com.apple.photostream-agent
   com.genieo.completer.download
   com.genieo.completer.update
   com.cisco.anyconnect.gui
   com.citrix.ReceiverHelper
   com.citrix.AuthManager_Mac
   com.citrix.FMDAgent.14800.UUID
   com.oracle.java.Java-Updater
   com.fiplab.MailTabProHelper
   com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
   com.citrixonline.GoToMeeting.G2MUpdate
   com.apple.AirPortBaseStationAgent
   com.microsoft.SyncServicesAgent
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/hp_fax_io.kext
   - com.hp.kext.hp-fax-io
   /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
   - com.hp.print.hpio.Inkjet1.kext
   /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
   - com.hp.print.hpio.Inkjet4.kext
   /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
   - com.hp.print.hpio.inkjet8.kext
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/WD1394_64_109HPDriver.kext
   - com.wdc.driver.1394.64.10.9
   /System/Library/Extensions/WDUSB_64_109HPDriver.kext
   - com.wdc.driver.USB.64.10.9
   /Library/Extensions/hp_io_printerclassdriver_enabler.kext
   - com.hp.hpio.hp-io-printerclassdriver-enabler
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
   - com.citrix.citrixicaclientplugIn
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/npg.plugin
   - npg.graphon.com
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/SlingPlayer.plugin
   - com.slingmedia.slingplayer.plugin.nspapi
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/FMDSysPrefPane.prefPane
   - Citrix.FMDSysPrefPane
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
   - com.westerndigital.quickview.prefpanel
   /Library/PreferencePanes/Zimbra.prefPane
   - com.zimbra.prefpanel
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Internet Plug-Ins/WebEx.plugin
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx64.plugin
   - com.cisco_webex.plugin.gpc64
dylibs
   /usr/lib/libaudioc.dylib
   /usr/lib/libclipc.dylib
   /usr/lib/libcs.dylib
   /usr/lib/libdc.dylib
   /usr/lib/libfilec.dylib
   /usr/lib/libMonoPosixHelper.dylib
   /usr/lib/libpbr.dylib
   /usr/lib/libprintc.dylib
   /usr/lib/libsc.dylib
   /usr/lib/libSFFileMonitor.32.dylib
   /usr/lib/libSFIPC.32.dylib
   /usr/lib/libSFIPC.I.dylib
   /usr/lib/libSFsqlite3.7.4.dylib
   /usr/lib/libSFSyncEngine.I.dylib
   /usr/lib/libupc.dylib
App extensions
   it.bloop.airmail.beta10.Airmail-Today-Beta
   it.bloop.airmail.beta10.Airmail-Composer-Beta
   com.wunderkinder.wunderlistdesktop.sharingextension
   com.wunderkinder.wunderlistdesktop.todayextension
   com.readitlater.PocketMac.AddToPocketShareExtension
   com.stylemac.instadesk.Photodesk-Feed
   it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
   /Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/opt/cisco/anyconnect/gui_keepalive</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.cisco.anyconnect.gui</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>open</string>
    <string>--wait-apps</string>
    <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>57</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
   http://www.apple.com/DTDs/PropertyList-1.0.dtd >
   <plist version="1.0">
   <dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.vpnagentd</string>
        <key>ProgramArguments</key>
        <array>
             <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
             <string>-execv_instance</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>EnableTransactions</key>
        <false/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.SmartwareDriveService</string>
    <key>Program</key>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.WDSmartWareService</string>
   
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.download</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>download</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Downloads</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.update</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>update</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>StartInterval</key>
    <integer>86400</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.microsoft.SyncServicesAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
           <key>Label</key>
           <string>com.zimbra.desktop</string>
           <key>ProgramArguments</key>
           <array>
                   <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                   <string>start</string>
                   <string>-w</string>
           </array>

I'm having problems with my printer

Similar Messages

Maybe you are looking for