I'm not receiving any mail into the Junk Mailbox
Hi
I had a problem with the ports of the 2 accounts that I have set up in Mail (one of those is mac.com) due to an excess of space used. I tried several options and it finally it worked. As a result, a week later I realised that I was not receiving any mail into the Junk Mailbox... I don't know if it is related to the orher problem, maybe not.
Essentially I am no longer receiving any junk mail at all - and no mail that is even doubtful (ie from an unknown address). The mails are not showing up even online via MobileMe ... so I have no idea where they are!
Any help would be much appreciated. Thanks.
Yes, I'm the author of the form and I expected the generic notification to be sent to that email but none is coming through. I also see that there is a place on the settings page to enter a custom notification email but that is grayed out unless I upgrade. I just want at least one, generic email to be sent to me so that I can know when a user submits a form.
Here's my screen shots:
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-1.jpg
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-2.jpg
Your Thoughts? Thanks!
Joe
Similar Messages
-
Help! I can send email but I have not received any emails for the last 2 days. What can I do?
Hello Liz,
It sounds like you are not able to receive emails on your iPad. I recommend the following resources for an issue like this:
Setting up and troubleshooting Mail
https://www.apple.com/support/ipad/assistant/mail/
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am not receiving any mail atm msg recvd 'The connection to the server failed' What do I do to start receiving email again?
Well first of all Thanks a lot for the replies.
Carrier guys said that everything is fine. I just have to try inserting the sim again just to ensure proper sim position.
Where do I find the DND setting? -
I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.
Try Mail->Window->Connection Doctor. If there is a problem reported, try:
Open Mail->Preferences and check your settings.
If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account -
Mail puts all mail in the Junk mailbox
I've been working fine with Mail for years. All of a sudden it started putting all incoming mail in the Junk mailbox, ignoring the filtering and sorting rules which I have set up in Preferences/Rules. I've poked around Preferences and everything seems to be as it was. I got rid of a lot of old mail. I rebuilt all my mailboxes. It's a pain to manually sort all my mail and even when I mark mail as "Not Junk" it still comes as Junk the next time.
Frustrating! Any ideas???I ended up REMOVING the junk folder from the list of folders on the left. When mail arrives that IS junk, I mark it junk, then select "move to junk folder (again)" and off it goes. I find this much better than to have all my mail go to junk and I have to UNjunk it and move it to the appropriate folder.
I wrote to Apple, but have not received a response -- I'm NOT holding my breath! -
I am not receiving e-mail from the teacher of the class.
I am not receiving e-mails from my teacher. Classmates cannot forward his messages to me.
The teacher can send me a personal (one person) message but not messages to the class as a whole.
I use Apple mail on my Macbook and Outlook (on my PC).Hi David!
Your not alone. Many users haven't received any since Sat 12/31/05. Myself included.
The Email notification function seems to be, occasionally problematic.
I'm sure it's one of the things being ironed out.
I have noticed that when the Emails don't get sent for a period of time, they will eventually catch up.
In the interim, I check my Subscriptions here in Discussions.
ali b -
Mail does not move Junk mail to the Junk mailbox.
I use OS X 10.9.3, Mail Version 7.3 (1878.2) and have created the rule that if Message is Junk, Move it to the Junk mailbox, but it does not work. Junk messages remain in the Inbox, even after I select messages and Apply rules. I have tried marking and unmarking as Junk, and then they disappear, but this is obviously not a sustainable longterm solution. Any other suggestions?
Hi Jeff, are you saying the Inbox with Junk is inside the Junk Folder, or is this a different account?
First Quit Mail, look in the finder for those IMAP folders inside your...
Users/YourUserName/Library/Mail/IMAPaccount folder, move them where they should be in the Finder.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup -
OWA not receiving any mails.
Hello,
A client of mine has the SBS 2011 installed in a server and has a domain (domain.com.py) with several users.
Everything worked just fine until I added a new user in the server and in the domain control panel.
The new user is able to acces the owa and send/receive internal mail, hi can also send external emails, but cannot receive from an external domain.
Any ideas or recomendations to solve this?
Thank you in advance.
Daniel.This is what the mxtoolbox returned:
1. https The underlying connection was closed: An unexpected error occurred on a send.
2. dns
Name Servers are on the Same Subnet
3. dns
SOA Refresh Value is outside of the recommended range
4. dns
SOA Expire Value out of recommended range
5. smtp
Warning - Reverse DNS does not match SMTP Banner
6. spf
A Valid SPF Record was not found
Can it be the reverse DNS? -
I keep getting the error that nothing was imported due to files or folders selected to import did not contain any supported file types or the files are already in this catalog. It started two days ago ( I have had elements 13 for about 6 weeks now) after I put my photo card in to download as usual. I have used photoshop elements for years and know what I'm doing. I also have Photoshop 12 that works just fine and will download these same files with no issues. I am using hp laptop and windows 8.1. Please help. I have thought about uninstalling and re installing but I have a lot of effects that have been added already and it is time consuming to do it again.Thank you for any advice
This is often a feature of faulty battery. Try to Restore your iPhone with iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send your iPhone to Apple for resolution under Warranty.
-
Get mail button not working can not receive any mail
Hello
my mail stops working half way. I can sent messages but suddenly my get mail is not working anymore. not through the button and not through the mailbox menu.
any help
regardsWho is your ISP, how is your mail configured - POP or IMAP and do you get any error messages and if so what are they?
-
PSEMAgent did not load any information into the hub for Webshpere 6.1 ND
Hi all,
using
Oracle 10 R2 10.2.0.3
Webshpere 6.1 Network Deployment
Peoplesoft HRMS and Campus Solution 9.0
i run the two commands startagent.bat recrawl and startagent.bat, the agent started sending pulses "sending pulse from com.peoplesoft.emf.peer:id=1".
but when i entered the hubURL into browser, there was no registered host (at that time both PSEMagent and Change Assistant were running)
Note: webserver is using port 80
someone please guide me how to deal it using websphereWhat is your OS ? Does the server run on the same box ?
Did you configure the files as well :
%PS_HOME%\PSEMViewer\envmetadata\config
%PS_HOME%\PSEMAgent\envmetadata\config
especially the parameters
hubURL
agentport
windowsdrivestocrawl
And also the file in your webserver directory path :
%PS_HOME%\webserv\peoplesoft\applications\peoplesoft\PSEMHUB\envmetadata\config
(the folder in italic may differ on your side).
Please, if you can, paste here the files content.
Nicolas. -
Where is my laptop. Why do I not receive any feedback about the several repairs.
I am in Quezon City Manila Philippines.
My laptop has been sent for repairs to the service dept Makat 4 times.
Have been waiting for several weeks now for my laptop to be retuned fixed.
I am now unable to contact the Makati service centre.
I want my laptop returned,fixed.Hello Mrno,
I totally understand your frustration. Please click here for a list of Technical support numbers for your laptop.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
I can't receive iCloud mail on the web or any of my devices
I have had an iCloud account since the early .mac days. Two days ago, all of the unread mail in my inbox disappeared from my iPhone 5S, iMac, MacBook Air, and even the iCloud website, and I have not received any mail on this account since. None of the troubleshooting has worked. I do still have unread mail that I have placed in files other than my inbox, and can SEND from the account, but something is seriously wrong here. Where are my lost unread messages, and why am I not receiving mail? Any ideas?
Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections
No data is lost due to a reset. -
I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.
Two thoughts:
1. You never need to open any emails in the junk mailbox. You can simply do Mailbox > Erase Junk Mail from Mail's menu.
2. What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed? That should hightlight both. -
I have applied for the free up-to-date program for the mountain lion os x upgrade. I received a tracking number too. How do I use this number to find out the status of my request? I have not received any email since the past 24 hours of my applicaiton.
It's hard to give accurate advise without knowing exactly which iMac model you have?
However, beware that your iMac must meet both Processor and RAM requirements.
OS X Lion - Technical Specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Also note that while 2GB of RAM is the minimum requirment, you will be much happier with 4 GB or more.
RAM is a user upgrade, see > iMac: How to remove or install memory
Plus some great third party RAM suppliers are OWC (macsales) and Crucial
Upgrade Apple iMac Memory & more – Easy Guide, Free Installation Videos.
Crucial Memory Upgrades for Macs - Apple Memory
Maybe you are looking for
-
How to Add a user defined field in transaction-PKMC?
Could anyone tell me the step by step process of how to add a user defined field in transaction-PKMC? Moderator message: please do some research before posting. Edited by: Thomas Zloch on Jan 16, 2012
-
Config and create IDOC on F110- vendor payment.
Hi, I have a requirement to setup ALE/IDOC on F110 T-code. The requirement is when Payment run Vendor remittance and Inform bank to pay. I want config details with Tcodes right from step 1. Also guide me how to write a IDOC program for outbound proce
-
I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to
-
Safenet 8.2 fails to install
Has anyone been able to install Safenet 8.2 after upgrading to ML? Fails everytime for me and I subsequently cant use Cisco AnyConnect 3.0 to VPN. ML broke Safenet 8.1.0.5 and now I cannot VPN.
-
Record time from start to trigger
Hello there, I have a program that uses N analog channels to record data, they start taking data (either finite or continuously) a trigger. I use the built in digital trigger but a software analog trigger (works well though). For now let's just worry