I need a new Top and Bottom Shell (Underside and Top of the main part of the laptop)
I can't find the parts I need in partsurfer, though I may have messed up. Any help would be appreciated. On a related note, HP Really needs to improve their issues with the left heinge.
I've tried the procedure you referenced. I still believe I need to clear all earlier syncing history before I can sync my phone with my laptop. When I tried the procedure you've recommended I couldn't find/recall my old sync key. I went through the process of resetting and creating a new sync key, but that didn't help...
Similar Messages
-
I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.
Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy. -
Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself. -
I need a new phone and iPod, would I be able to use an iPhone as a phone and iPod, without having to purchase the internet date plan?
You cannot do this. iPhones have to be activated with a service plan before any of the features, including the iPod features can be used.
-
How can I set up new sites to open in new pages and not over the top of the current open page?
how can I set up new sites to open in new pages and not over the top of the current open page?
Middle-click ''(press down mouse scroll wheel)'' <br />
or <br />
{Ctrl + Click} <br />
or <br />
Right-click and use '''''Open in a New Tab''''' -
I have an iphone 4, and it's the first edition... I need a new phone and the latest is the iPhone 5. I'm wondering if apple will release a new iphone soon or should i go with the iphone 5?
No one here would know Apple's plans. But, if past history holds true, expect a new model iPhone sometime between now & the fall.
-
Do i need a new SWCV and a business system
Hi Friends
Do i need a new SWCV and Business suystem for every scenario .
Let us say i created one file to iDOC scenario with the same sender and same target system
and now for the same Sender and Reciever i want to create one more scenario which is again a file to idoc
So for this do i have to do all the stuff in SLD again.
ThanksNo you need not create a new technical and business system. You can use the existing technical and business system defined for the same source and target system. You just need to go to the "Objects" tab in ID and add the business system to your scenario.
As far as technical and business sytem info:
SLD is based on the CIM model ( Common Information model)
this model clasiifies the system in terms of SWC, Product, TS, BS to list down....
TS--> Technical details of the system likeserver name, IP etc....it mostly identifies the system with it's technically ( this gives option to change the TS in future suupose you change the server or its configuration etc)
BS---> represents the BS usuage identity suppose youa re using the SAP r/3 clnt 100 is sued for develoment activity 200 for QA here the R/3 palys the TS system and 100 200 plays int he Business system....for that particular business wht'a the role of this system......
Do award points if you feel your query is answered.
Thanx
Ravijeet -
HT5622 I was setting up the new IOS and came to the point where I needed my Apple ID and password
I was setting up the new IOS and came to the point where I needed my Apple ID and password. I had to go and change it before proceeding, now I can't get back to the setup. Can you tell me how to go back and finish the setup?
Settings > Store > Sign Out.
Sign in with the correct ID. -
I need a new iphone and I've found a fully refurbished iphone 5 for a competitive price. Is it a bad idea to get this phone seeing as they are no longer in production? Will it still get updates?
Or is it worth buying the iphone 5c?Hi I would buy the iPhone 5s look on EBay make sure the ICloud Lock has been removed Get the 32G one buy one with the box and from someone who has good feedback. Also look at Refurbished IPhones on Apple Website. Cheers Brian
-
I have a new keyboard and two of the keys are inverted when I use my Mac -- but not when they put that keyboard on the Mac at the Apple Store. The @ is where the < should be and visa-versa. That is, when I type the @ I get < and when I type the < I get @. I am in Français numérique. Thanks
Try a SMC reset, please do it 2-3 times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?
that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.
Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).
-
I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this thing going?
You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5 -
I have 2 iTunes accounts. How do I transfer my balance from the old account to the new account and then delete the old account?
i dont think that is possible, but then again, anything is possible. probably gonna have the best luck by contacting itunes / http://www.apple.com/support/contact/
Maybe you are looking for
-
How to name the Check Box as "Want Free Gift" using PARAMETERS statements
Hi all, I am new to check boxes. I have a existing report where I have to add a check box to the selection screen. So i said PARAMETERS: p_cncldc AS CHECKBOX. everythibng is fine and I get the check box on the selection screen. when i execute the rep
-
Windows 8.1 Bootcamp installation on MacBook Pro 5,5 (2009 i think)
Hi guys, i have a MacBookPro5,5 (and i think it's mid 2009) and i want to create a Win 8.1 64 bit partition. When i run Bootcamp (i have the version 1.0 i think) the program says: "Insert XP or Vista installation CD".. There's a way to install Window
-
Help with a database design for community housing project
Talking database design Hi all, I have been wondering about the design of tables for a big block of residential units. There are 100 + rooms. there are about 25 houses in this complex but the 100 + rooms are all rented out separately. Its just like a
-
Constant crashes, windows won't come forward, images won't load
With every version of Firefox, the program malfunctions more. First, I get "(Not Responding)" constantly. Sometimes I end the process and restart FF, but at other times it crashes on its own and I get the Crash Reporter. Starting a few updates back,
-
I have iPhone 4s and I was reset it but its failed and still shows apple logo and process line, I tried many times to hold home button and switch together it restart again and still showing that place help me on that #Apple teams