I need assistance in burning an imovie to a DVD. I've done this before, but am having problems this go around. When I get to the import section and insert the blank dvd it runs a few seconds and ejects it. Any ideas?
I am struggling with getting the imovie I just created to burn onto a DVD. I have done this before, I'm following the tutorial for imovie '09 and it isn't working after several attempts. Any suggestions? When I get to the import phase and insert the blank dvd it runs a few seconds and then spits it out.
tomc1965 wrote:
I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all.
My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of.
My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all.
The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all.
I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound.
When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?
Similar Messages
-
I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas
You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan -
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you. -
WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I created a 13 min Slide Show in iPhoto but have a question on adding music. I would like to add music clips that are set to change at the beginning of certian slides so that there is a varity of music during the show rather than a continuous theme clip. I know you can add multiple clips but can you pin them to change at a particular point in the program? Right now the music clips just run to their time limit and the next one starts. Isn't there a way to edit them the way it can be done in iMovie? Its frustrating to be able to create a nice slide show and not be able to manage the music background. Any suggestions would be greatly appreciated. Thanks.
No, you don't have that fine grained control of the soundtrack in iPhoto. It's designed for a quick job, not a complex one.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for. -
Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50). I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content. I've uninstalled and reinstalled iTunes but it's made no difference. Any ideas how to fix please?
Disable your firewall/security software.
-
Well it won't turn on despite the indicator lights all being green showing it has power!
Troubleshooting a MacBook, MacBook Air or MacBook Pro that won't turn on
-
My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.
Hi, the problem is that my IT department was sent a link on his laptop to install Illustrator, however the request was for them to build me a workstation and install it on there. they have built the workstation and is having problem installing the CC desktop app on there, just to clarify would you be able to answer the following:
1) Do you have to have CC desktop app to install Illustrator from the given link?
2) If you have signed up & installed CC on your laptop, can you install illustrator on a workstation by simply installing the CC desktop app on the workstation, log into that with your username & activate the link to install illustrator, basically the provided link should not be specific to a computer or user?
Thanks -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?
try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes. -
im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
and have tried older versions of football manager and they dont read either
any help would be greatly appreciated
thanksTry resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
Intel iMac SMC and PRAM resets -
When I FaceTime friends in Tenerife, the video is on for a few seconds then their picture freezes followed by a blank screen with a Poor Connection message. When they Facetime back, the video is perfect. Has anybody any ideas?
I had this same thing happen to me. I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen.
-
HT1338 Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.
Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.
Because this is affecting multiple DVD's it suggests a faulty drive. If you were willing to spend a few $ or € and purchase an external optical drive from any electronic shop, that would be a sound diagnostic step to take; possibly a solution and cheaper than replacing the internal drive if counting labour is a factor.
-
How can I burn my iMovie project to DVD? I do not have iDVD or iLife on my iMac but I do have the internal DVD slot.
Hi
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
• iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
• DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
• Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
• Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
only You can buy from Apple is
• FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Yours Bengt W
Maybe you are looking for
-
Dragging clips to bins is very slow in Premiere CS6
I just upgraded to Premiere CS6 from CS 5.5 (no thank you, CC) and have problems with very slow speed when dragging clips from one bin to another in the Project panel. Here are the specifics: I have about 1500 clips in a bin that I'm sorting through
-
Microsoft DHCP Server - Option 43 Setup
I have the scope configured properly as far as the 241 Option with Option 43 and the VCI in it for both the 1130 and 1200 series AP's. However, how do you make this work if your subnet has both 1200 and 1130's in it? Basically if I have two 241 optio
-
Configuration: Oracle SQL Developer 3.0.04, Windows 7 x64. Question: If you right click on a SQL file tab, it gives you the option of merging all of the file tabs onto one row so you can only see one file at once, but you can see a "full screen" of i
-
Error when installing Lightroom 5
The system say that I have a connection problem, but it isn't true: my connection is ok.
-
I cant open regedit in windows 8
I tried to change the default installation directory in regedit and I restart my laptop and now I cant open regedit any more!! before I close it I got a backup on my desktop. please help me I cant Install any thing any moreee!!!